My Weigh Triton T2 Digital Pocket Scale

Introduzzjoni

This manual provides detailed instructions for the proper use and maintenance of your My Weigh Triton T2 Digital Pocket Scale. Designed for precision and durability, this scale offers accurate measurements for various applications. Please read this manual thoroughly before operating the device.

Prekawzjonijiet tas-Sigurtà u Linji Gwida għall-Użu

• Taqbiżx il-Kapaċità: Never exceed the maximum capacity of 120 grams for the Triton T2 scale at any time. Overloading can damage the weighing mechanism.
• Wiċċ Stabbli: Always place the scale on a flat, stable surface. Ensure the scale is not exposed to vibrations, air currents, extreme temperatures, or dust, as these can affect accuracy.
• Akklimazzjoni: When turning the scale on, allow it to self-test and acclimate. The display will typically show '0.0' when ready.
• Expansion Tray: The protective cover is removable when fully open and can be used as an expansion tray for weighing larger items.
• Qari Stabbli: The display may show slight fluctuations due to the extreme sensitivity of the scale. The correct reading is achieved when the readout becomes stable.

Setup

Installazzjoni tal-batterija

The My Weigh Triton T2 scale requires 2 AAA batteries, which are included. To install or replace batteries, locate the battery compartment on the underside of the scale, open the cover, insert the batteries according to the polarity indicators, and close the compartment securely.

Tqegħid Inizjali

Place the scale on a firm, level, and stable surface, away from drafts, vibrations, and extreme temperature changes. This ensures optimal performance and accuracy.

Istruzzjonijiet Operattivi

Qawwa mixgħul/mitfi

• To turn the scale ON, agħfas il- ON/OFF button (red button). The display will show '88888' then '0.0' or '0.00'.
• To turn the scale OFF, agħfas u żomm il- ON/OFF buttuna sakemm il-wiri jintefa.

Proċedura ta' Użin

1. Turn the scale on and wait for it to stabilize at '0.0'.
2. Gently place the item to be weighed onto the center of the weighing platform.
3. Read the stable weight displayed on the LCD screen.

Konverżjoni ta' Unità

The Triton T2 scale can display weight in multiple units. To change the weighing unit:

• Bl-iskala mixgħula, agħfas il-buttuna UNITÀ button repeatedly to cycle through available units: Grams (g), Ounces (oz), Troy Ounces (ozt), and Pennyweight (dwt).
• The selected unit will be indicated on the display.

Funzjoni Tara

The Tare function allows you to subtract the weight of a container, so you only measure the contents.

1. Place an empty container on the weighing platform.
2. Agħfas il- TARE button (often labeled '-0-' or 'T'). The display will reset to '0.0'.
3. Add the items to be weighed into the container. The display will show only the net weight of the items.

Using the Expansion Tray

The scale's protective cover can be detached and inverted to serve as an expansion tray, providing a larger surface for weighing items. Simply open the cover fully, detach it, and place it upside down on the weighing platform.

Kalibrazzjoni

Calibration ensures the accuracy of your scale. A 100g calibration weight (not included) is required for this procedure.

1. Turn the scale OFF and place it on a flat, stable surface.
2. Agħfas u żomm il- UNITÀ buttuna, imbagħad agħfas u erħi l-buttuna ON/OFF button. The display will show the required calibration weight (e.g., '120.0g').
3. Agħfas il- UNITÀ button again. The display will read 'CAL' and then '0.0'.
4. Gently place the specified calibration weight (e.g., 100g or 120g, depending on the scale's prompt) onto the center of the weighing platform and wait for approximately 3 seconds.
5. Agħfas il- UNITÀ button. The display should show 'PASS' and then return to '0.0'. Calibration is now complete. Remove the weight.

Manutenzjoni

• Tindif: Naddaf l-iskala b'artab, damp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-iskala fl-ilma.
• Ħażna: Store the scale in a dry, cool place. Avoid storing it in areas with high humidity or extreme temperatures.
• Kura tal-batterija: Remove batteries if the scale will not be used for an extended period to prevent leakage.

Issolvi l-problemi

• Qari Instabbli: If readings are unstable, ensure the scale is on a flat, stable surface, away from drafts, vibrations, and electronic devices that may cause interference. Recalibration may also be necessary.
• Żbalji fil-Wiri: If the display shows 'EEEE' or 'O-Ld', the scale is overloaded. Remove the weight immediately. If 'Lo' appears, batteries are low and need replacement.

Speċifikazzjonijiet

• Ditta: Iżen tiegħi
• Mudell: Triton T2
• Kapaċità: 120 Gramm
• Eżattezza: 0.1 Gramm
• Unitajiet tal-użin: Grams (g), Ounces (oz), Troy Ounces (ozt), Pennyweight (dwt)
• Wiri: LCD backlit
• Qawwa: 2 x Batteriji AAA (inklużi)
• Materjal: Acrylonitrile Butadiene Styrene (ABS)
• Karatteristiċi: Tare function, Auto Calibration, Overload Protection, Expansion Tray (cover)
• Piż tal-oġġett: Madwar 6.4 uqija

Prodott Overview

Garanzija u Appoġġ

The My Weigh Triton T2 Digital Pocket Scale comes with a Lifetime Replacement Warranty (CE certified). For warranty claims or technical support, please contact My Weigh customer service through their official website or authorized distributors. Keep your purchase receipt as proof of purchase.