KRUPS BW500 1.8 Quart Electric Kettle

1. Istruzzjonijiet Importanti dwar is-Sigurtà

Meta tuża apparat elettriku, għandhom dejjem jiġu segwiti prekawzjonijiet bażiċi ta’ sigurtà biex jitnaqqas ir-riskju ta’ nar, xokk elettriku, u/jew korriment lill-persuni, inkluż dan li ġej:

• Aqra l-istruzzjonijiet kollha qabel tuża l-kitla.
• Tmissx uċuħ sħan. Uża manki jew pumi.
• Biex tipproteġi kontra n-nar, xokk elettriku, u korriment lil persuni, tgħaddasx il-korda, il-plakek, jew il-kitla fl-ilma jew f'likwidu ieħor.
• Superviżjoni mill-qrib hija meħtieġa meta xi apparat jintuża minn jew ħdejn it-tfal.
• Spluggja mill-iżbokk meta ma tkunx qed tuża u qabel tnaddaf. Ħallih jiksaħ qabel ma tpoġġi jew tneħħi l-partijiet, u qabel tnaddaf l-apparat.
• Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara jew wara li l-apparat ma jaħdimx ħażin, jew ikun ġie bil-ħsara b'xi mod. Irritorna l-apparat fl-eqreb faċilità ta’ servizz awtorizzata għal eżami, tiswija, jew aġġustament.
• L-użu ta' aċċessorji aċċessorji mhux rakkomandati mill-manifattur tal-apparat jista' jirriżulta f'nar, xokk elettriku, jew korriment lil persuni.
• Tużax barra.
• Tħallix il-korda tistrieħ fuq it-tarf tal-mejda jew tal-bank, jew tmiss uċuħ sħan.
• Tpoġġix fuq jew ħdejn burner tal-gass sħun jew elettriku, jew f'forn imsaħħan.
• Dejjem waħħal il-plagg mal-apparat l-ewwel, imbagħad daħħal il-korda fis-sokit tal-ħajt. Biex tiskonnettja, itfi kwalunkwe kontroll, imbagħad neħħi l-plagg mis-sokit tal-ħajt.
• Tużax l-apparat għal użu ieħor minbarra dak maħsub.
• Tixtar jista 'jseħħ jekk l-għatu jitneħħa matul iċ-ċiklu tat-tisħin.
• Kun żgur li l-għatu jkun magħluq sew qabel ma tħaddem.
• Dan l-apparat huwa għall-użu fid-dar biss.

2. Prodott Aktarview

The KRUPS BW500 Electric Kettle is designed for rapid water heating with a 1.8-quart capacity. It features a brushed stainless steel body and a 360-degree rotational base for cordless operation.

Figura 1: Quddiem view of the KRUPS BW500 Electric Kettle.

Figure 2: Components of the KRUPS BW500 Electric Kettle, including the kettle body, power base, and removable lid.

Figure 3: Water level indicators on the side of the KRUPS BW500 Electric Kettle, showing measurements in ounces and cups.

3. Twaqqif u l-Ewwel Użu

3.1 Disimballaġġ

Carefully remove all packaging materials from the kettle and its components. Retain packaging for future storage or transport if needed.

3.2 Tindif Inizjali

1. Before first use, fill the kettle with cold water up to the maximum fill line.
2. Għalli l-ilma.
3. Armi l-ilma mgħolli.
4. Repeat this process two to three times to remove any manufacturing residues and ensure optimal taste.

3.3 Tqegħid

Place the power base on a flat, stable, heat-resistant surface. Ensure the power cord is not dangling where it can be pulled or tripped over.

4. Istruzzjonijiet Operattivi

4.1 Imla l-Kitla

1. Neħħi l-kitla mill-bażi tal-qawwa tagħha.
2. Press the lid release button or lift the lid to open.
3. Fill the kettle with the desired amount of cold water. Do not fill below the minimum mark or above the maximum (1.8 quarts / 57 oz) mark. Overfilling may cause boiling water to spill out.
4. Agħlaq l-għatu sew.

Figure 4: A hand demonstrating how to open the lid of the KRUPS BW500 Electric Kettle.

4.2 Ilma jagħli

1. Place the filled kettle onto its 360-degree rotational power base. Ensure it is seated correctly.
2. Ipplaggja l-bażi tal-enerġija f'sokit elettriku standard.
3. Press the On/Off switch located on the handle. The indicator light will illuminate, signaling that the kettle is heating.
4. The kettle will automatically shut off once the water reaches a boil. The indicator light will turn off.
5. You can remove the kettle from the base at any time during the boiling process.

Figure 5: The KRUPS BW500 Electric Kettle placed on its 360-degree rotational power base.

4.3 Tferrigħ

Carefully lift the kettle from the base and pour the hot water. Be mindful of steam and the hot exterior of the kettle. The spout is designed for drip-free pouring.

5. Manutenzjoni u Tindif

Tindif u manutenzjoni regolari jtawlu l-ħajja tal-kitla tiegħek u jiżguraw prestazzjoni ottimali.

5.1 Tindif ta' barra

1. Aqla 'l-kitla u ħalliha tiksaħ kompletament qabel tnaddaf.
2. Imsaħ il-barra b'artab, damp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the brushed stainless steel finish.
3. Kun żgur li ma jidħolx ilma fil-komponenti elettriċi.

5.2 Tindif u Tneħħija tal-Ġir minn Ġewwa

Mineral deposits (limescale) can build up inside the kettle over time, especially in hard water areas. Descaling is recommended periodically.

1. Imla l-kitla b'taħlita ta' parti waħda ħall abjad u żewġ partijiet ilma.
2. Ġib it-taħlita sakemm tagħli u mbagħad ħalliha toqgħod għal mill-inqas 30 minuta, jew aktar għal ġebel tqil.
3. Vojta l-kitla u laħlaħha sew b'ilma frisk diversi drabi.
4. If necessary, repeat the process or use a commercial descaling solution following its instructions.

5.3 Anti-Scale Filter Cleaning

The kettle is equipped with an anti-scale filter near the spout to prevent limescale particles from being poured into your cup.

1. Ensure the kettle is cool and unplugged.
2. Open the lid and carefully remove the anti-scale filter.
3. Rinse the filter under running water and gently brush away any deposits.
4. Erġa' daħħal il-filtru sew f'postu.

Figure 6: A hand removing the anti-scale filter from the spout of the KRUPS BW500 Electric Kettle.

6 Issolvi l-problemi

If you encounter issues with your KRUPS BW500 Electric Kettle, please refer to the following common problems and solutions:

• Il-kitla ma tissaħħanx:
  • Kun żgur li l-bażi tal-enerġija hija pplaggjata sew f'sokit elettriku li jaħdem.
  • Verify that the kettle is correctly seated on the power base.
  • Check if the On/Off switch is pressed and the indicator light is on.
• L-ilma għandu togħma mhux tas-soltu:
  • Perform the initial cleaning steps (boiling and discarding water) multiple times.
  • Descale the kettle if mineral deposits are present.
• Kettle leaks water:
  • Ensure the lid is closed properly and securely.
  • Do not overfill the kettle beyond the maximum fill line.
  • Check for any visible damage or cracks. If damage is present, discontinue use and contact customer support.
• Kettle automatically shuts off too soon or not at all:
  • Ensure the kettle is filled with at least the minimum amount of water.
  • If the issue persists, the automatic shut-off mechanism may require servicing.

If these steps do not resolve the issue, please contact KRUPS customer support for further assistance.

7. Speċifikazzjonijiet

8. Informazzjoni dwar Garanzija

The KRUPS BW500 Electric Kettle comes with a 2-year worldwide limited warranty. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.

For specific terms, conditions, and to make a warranty claim, please refer to the warranty card included with your product or contact KRUPS customer support directly.

9. Appoġġ għall-Klijent

For any questions, assistance, or service inquiries regarding your KRUPS BW500 Electric Kettle, please contact KRUPS customer support.

You can find contact information on the official KRUPS webis-sit jew permezz tad-dokumentazzjoni pprovduta mal-prodott tiegħek.

Żur il- Ħanut KRUPS fuq Amazon għal aktar informazzjoni u prodotti.