1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB494 Magellan 4-Inch Bar Faucet. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of the product. Retain this manual for future reference.
Figure 1: Kingston Brass KB494 Magellan 4-Inch Bar Faucet, Polished Chrome/Polished Brass.
2. Informazzjoni dwar is-Sigurtà
- Always turn off the main water supply before beginning any installation or repair work.
- Ilbes tagħmir protettiv personali xieraq, bħal nuċċalijiet u ingwanti tas-sigurtà, waqt l-installazzjoni.
- Kun żgur li l-konnessjonijiet kollha huma sikuri biex tevita t-tnixxijiet. Tissikkax iżżejjed.
- Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta plamer kwalifikat.
- Żomm partijiet żgħar 'il bogħod mit-tfal.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Kingston Brass KB494 Magellan Bar Faucet Assembly
- Mounting Hardware (nuts, washers, gaskets)
- Manwal ta' Installazzjoni (dan id-dokument)
4. Speċifikazzjonijiet
| Numru tal-Mudell | KB494 |
| Brand | Kingston Brass |
| Temm | Polished Chrome/Polished Brass |
| Materjal | Ram |
| Tip ta 'Immuntar | Deck Mount, 2-hole 4-inch centerset |
| Numru ta 'Mankijiet | 2 (Mankijiet tal-lieva tal-metall) |
| Tip ta 'Skartoċċ | 1/4-turn Washerless |
| Rata tal-Fluss | Max 1.8 GPM / 6.8 LPM at 60 PSI (ASME Standard) |
| Tip ta' Spout | J-Spout, High Arc |
| Jilħaq spout | 4.75 pulzieri |
| B'ħeġġeġ Għoli | 11.56 pulzieri |
| Dimensjonijiet ġenerali | 4.75"D x 4.75"W x 11"H |
| Karatteristiċi Speċjali | ADA Compliant Handles |
5. Istruzzjonijiet ta 'installazzjoni
5.1. Qabel ma Tibda
- Itfi l-provvista prinċipali tal-ilma għaż-żona tal-installazzjoni.
- Naddaf iż-żona taħt is-sink għal aċċess faċli.
- Ensure you have all necessary tools: adjustable wrench, plumber's putty or silicone sealant, screwdriver, flashlight.
5.2. Faucet Assembly
- Prepare the Faucet Base: If your faucet comes with a base plate, ensure it is properly seated on the faucet body. Apply a thin bead of plumber's putty or silicone sealant around the perimeter of the faucet base where it will meet the sink deck.
- Position the Faucet: Insert the faucet body and hot/cold water supply lines through the two pre-drilled holes (4-inch centerset) in your sink or countertop. Ensure the faucet is oriented correctly.
- Waħħal il-Faucet: From underneath the sink, slide the rubber washer, metal washer, and mounting nuts onto the threaded shanks of the faucet. Hand-tighten the nuts, then use an adjustable wrench to carefully tighten them until the faucet is secure and does not wobble. Do not overtighten.
- Qabbad il-Linji tal-Provvista tal-Ilma: Connect the hot and cold water supply lines from the faucet to the corresponding hot and cold water supply valves. Use an adjustable wrench to tighten the connections. Ensure a watertight seal, but avoid overtightening.
- Iċċekkja għal Tnixxijiet: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, gently tighten the connections until the leak stops.
- Operazzjoni tat-Test: Operate the hot and cold handles to ensure proper water flow and temperature control. Allow water to run for a few minutes to flush out any debris from the lines.
6. Operazzjoni
The Kingston Brass KB494 Magellan Bar Faucet features two metal lever handles for controlling water flow and temperature.
- Ilma kiesaħ: Turn the right handle counter-clockwise to open the cold water supply.
- Ilma sħun: Turn the left handle counter-clockwise to open the hot water supply.
- Kontroll tat-temperatura: Aġġusta l-manki tas-sħan u tal-kesħa simultanjament biex tikseb it-temperatura tal-ilma mixtieqa.
- Kontroll tal-Fluss: The handles provide 90-degree rotation for precise control over water flow.
7. Manutenzjoni u Kura
- Tindif: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Manutenzjoni tal-Aeratur: Periodically unscrew the aerator from the spout and clean any debris or mineral buildup. Rinse thoroughly and reattach.
- Prevenzjoni tat-tnixxija: Check connections periodically for any signs of leaks. Tighten connections gently if necessary.
- Finish Care: For polished chrome and polished brass finishes, dry the faucet after each use to prevent water spots and maintain its luster.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Flow Ilma Baxx | Clogged aerator; partially closed supply valve; debris in water lines. | Clean or replace aerator; ensure supply valves are fully open; flush water lines. |
| Faucet Leaks from Spout | Kartriġ mikul; debris fil-kartriġ. | Replace the washerless cartridge; clean debris from cartridge area. |
| Leaks from Base of Faucet | Skorfini tal-immuntar maħlula; applikazzjoni ħażina tas-siġillant. | Tighten mounting nuts (do not overtighten); reapply plumber's putty or silicone sealant. |
| Kwistjonijiet tat-Temperatura tal-Ilma | Incorrect hot/cold supply line connection; issues with water heater. | Iċċekkja li l-linji sħan u kesħin huma konnessi b'mod korrett; iċċekkja s-settings tal-water heater. |
9. Informazzjoni dwar Garanzija
Kingston Brass products are manufactured under strict quality standards. For specific warranty details regarding your KB494 Magellan Bar Faucet, please refer to the official Kingston Brass webis-sit jew ikkuntattja s-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għal talbiet ta’ garanzija.
10. Appoġġ għall-Klijent
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support:
- Websit: www.kingstonbrass.com
- Telefon: Refer to the Kingston Brass websit għal numri ta' kuntatt attwali.
