Introduzzjoni
This manual provides essential information for the proper setup, operation, and maintenance of your Fender '65 Princeton Reverb Guitar Amplifier. The '65 Princeton Reverb is a 15-watt all-tube amplifier designed for versatile use in various settings, from home practice to recording studios and small live performances. It features classic Fender tube tone, dynamic clean and overdriven sounds, and integrated long-spring reverb and tube vibrato effects.
Il-karatteristiċi ewlenin jinkludu:
- 15-watt all-tube amplification with tube rectification.
- Equipped with a 1-10" Jensen C-10R, 8 Ohm, 40 Watt Speaker with Ceramic Magnet.
- Integrated long-spring Fender reverb and tube vibrato effects.
- Jinkludi an amplifier cover and a 2-button footswitch for remote control of reverb and vibrato.
Figura 1: Quddiem view of the Fender '65 Princeton Reverb Guitar Amplifier, wirjaasing its classic black Tolex finish and silver grille cloth.
Setup
- Spakkjar: Neħħi bil-galbu amplifier from its packaging. Retain all packing materials for future transport or storage.
- Pjazzament: Pożizzjona l ampPoġġi l-apparat fuq wiċċ stabbli u livellat. Kun żgur li jkollok ventilazzjoni adegwata madwar l-unità biex tevita li tisħon iżżejjed. Evita li tpoġġi l-apparat ampLififier ħdejn sorsi ta' sħana jew fix-xemx diretta.
- Konnessjoni tal-Enerġija: Tiżgura l- amplifier's power switch is in the 'OFF' position. Connect the supplied power cord to the amplifier's AC inlet and then to a grounded electrical outlet. Verify that the outlet provides the correct voltage għar-reġjun tiegħek.
- Konnessjoni tal-Istrument: Connect your guitar or other instrument to one of the 'INSTRUMENTS' input jacks (Input 1 or Input 2) using a high-quality instrument cable. Input 1 typically offers higher sensitivity than Input 2.
- Footswitch Connection (Optional): If using the included 2-button footswitch, connect it to the 'FOOTSWITCH' jack on the amplifier's rear panel. This allows remote activation of the Reverb and Vibrato effects.
Istruzzjonijiet Operattivi
Iffamiljarizza ruħek mal- amplifier's front panel controls:
- Swiċċ tal-Enerġija: Dawwar il- amplifier ON or OFF. Allow a brief warm-up period after turning on.
- Volum: Jikkontrolla l-livell tal-output ġenerali tal- ampaktar ħaj.
- Treble: Adjusts the high-frequency response. Turn clockwise for brighter tones, counter-clockwise for warmer tones.
- Bass: Jaġġusta r-rispons tal-frekwenza baxxa. Dawwar lejn l-arloġġ għal aktar bass, kontra l-arloġġ għal inqas.
- Reverb: Jikkontrolla l-intensità tal-effett tar-reverb tar-rebbiegħa integrat.
- Veloċità: Jaġġusta r-rata tal-effett tal-vibrato.
- Intensità: Adjusts the depth or prominence of the vibrato effect.
Qawwa Inizjali:
- Ensure all volume and effect controls are set to their minimum positions.
- Flip the power switch to the 'ON' position. The pilot light will illuminate.
- Allow approximately 30-60 seconds for the tubes to warm up.
- Slowly increase the 'Volume' control to your desired listening level. Adjust 'Treble' and 'Bass' for tonal preference.
- Experiment with the 'Reverb', 'Speed', and 'Intensity' controls to achieve desired effects.
Figura 2: Intern view tal- amplifier, highlighting the vacuum tubes which are crucial for its tonal characteristics.
Manutenzjoni
- Tindif: Uża drapp ratba u niexfa biex tnaddaf il- ampIl-barra tal-lifer. Evita prodotti tat-tindif jew solventi li joborxu.
- Kura tat-Tubi: Vacuum tubes have a finite lifespan. If you notice a decrease in performance, unusual noise, or a change in tone, tubes may need replacement. Consult a qualified technician for tube replacement.
- Ħażna: Meta ma tkunx qed tużah, aħżen amplifier in a dry, temperature-controlled environment. Use the included amplifier cover to protect it from dust and minor impacts.
- Trasport: Dejjem itfi u aqla’ l-plagg tal-elettriku amplifier before moving it. Use proper lifting techniques due to its weight.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output tal-ħoss | Power cord disconnected, instrument cable faulty, volume set to zero, speaker disconnected. | Check power and instrument cables. Ensure volume is up. Verify speaker connection. |
| Ħsejjes ta’ daqq jew żanżin | Ground loop, faulty instrument cable, proximity to other electronics, worn tubes. | Try a different outlet. Use shielded cables. Move away from other devices. Consult technician for tube inspection. |
| Ħoss dgħajjef jew distort | Worn tubes, incorrect instrument input, speaker damage. | Check instrument input. Consult technician for tube or speaker inspection. |
| Reverb or Vibrato not working | Footswitch disconnected or faulty, effect controls set to zero, internal component failure. | Check footswitch connection and functionality. Ensure effect controls are adjusted. Consult technician. |
If troubleshooting steps do not resolve the issue, contact Fender customer support or a qualified service technician.
Speċifikazzjonijiet
- Ditta: Fender
- Mudell: '65 Princeton Reverb
- Numru tal-Mudell tal-Oġġett: 2172000000
- Output Wattage: 15 Watts
- Kelliem: 1-10" Jensen C-10R, 8 Ohm, 40 Watt Speaker with Ceramic Magnet
- Dimensjonijiet tal-Prodott: 28.25 x 22.5 x 12.25 inches (Length x Height x Depth)
- Piż tal-oġġett: 34 liri
- Kulur: Iswed
- Materjal: Metall, Injam
- Apparati Kompatibbli: Kitarra
- Manifattur: Fender Musical Instruments Corp.
Figure 3: Dimensional diagram of the amplifier, indicating its length, height, and depth.
Garanzija u Appoġġ
Fender products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your amplifier or visit the official Fender website. For technical support, service, or replacement parts, please contact Fender customer service through their official channels. Always provide your model number (2172000000) and serial number when seeking support.
Riżorsi onlajn: For additional information, product registration, and support, visit the official Fender websit.
