InFocus IN102 Portable DLP Projector User Manual

1. Introduzzjoni

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

Il-karatteristiċi ewlenin jinkludu:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• Dejjiema lamp and filter-free design for reduced maintenance.

2. X'hemm fil-Kaxxa

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• Korda tal-Enerġija
• Kejbil VGA
• Kawża tal-Ġarr
• Kontroll mill-bogħod
• Istruzzjonijiet tas-Sigurtà
• CD Quick Start/User Guide

3. Prodott Aktarview

Figura 3.1: Quddiem View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

Figura 3.2: Wara View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

Figura 3.3: Fuq View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

Figura 3.4: Qiegħ View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. Setup

4.1 Tqegħid

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 Qawwa tal-Konnessjoni

1. Connect the power cord to the AC inlet on the rear of the projector.
2. Ipplaggja t-tarf l-ieħor tal-korda tad-dawl fi żbokk elettriku ertjat.

4.3 Konnessjoni ta' Sorsi tal-Vidjo

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• S-Vidjo: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• Vidjo Kompost: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

Kun żgur li l-kejbils kollha huma konnessi sew qabel ma tixgħel il-proġettazzjoni.

5. Istruzzjonijiet Operattivi

5.1 Power On/Off

1. Biex tixgħel, agħfas il- Qawwa buttuna fuq il-pannell tal-kontroll tal-proġettazzjoni jew fuq il-kontroll remot. Id-dawl indikatur tal-enerġija jixgħel.
2. Biex titfi, agħfas il- Qawwa Agħfas il-buttuna darbtejn. Il-proġettazzjoni tidħol f'ċiklu ta' tkessiħ qabel ma tintefa kompletament. Tneħħix il-proġettazzjoni mill-plagg matul iċ-ċiklu tat-tkessiħ.

5.2 Għażla tas-Sors tal-Input

Agħfas il- Sors button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 Aġġustament tal-Immaġni

• Iffoka u Zoom: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Korrezzjoni Keystone: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• Luminożità u Kuntrast: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 Modalità Eko

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 Funzjonalità 3D

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. Manutenzjoni

6.1 Lamp Sostituzzjoni

Il-proġekter lamp għandu ħajja finita. Meta l-lamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. Aqla' l-korda tad-dawl.
3. Locate and open the lamp cover on the top of the projector.
4. Neħħi bir-reqqa l-l qodmaamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. Sikura l-lamp għatti u plagg il-korda tad-dawl.
6. Irrisettja l-lamp tajmer fil-menù OSD tal-proġettazzjoni.

6.2 Tindif

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 Ħażna

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• Iċċekkja l-Konnessjonijiet: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: Uża l- Sors button on the projector or remote to select the correct input channel corresponding to your connected device.
• Settings tal-Wiri tal-Kompjuter: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7, jew F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• Proġekter Lamp: Ivverifika l-lamp indicator light. If it's red or blinking, the lamp jista' jkollu bżonn sostituzzjoni.

7.2 Projector Shuts Off Unexpectedly

• Is-sħana żejda: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp Kwistjonijiet: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• Provvista tal-Enerġija: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 Kwistjonijiet tal-Kwalità tal-Immaġni

• Immaġni mċajpra: Adjust the focus ring on the projector lens.
• Distorted Image (Trapezoid): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 Il-Kontroll mill-Bogħod Mhux Jaħdem

• Batteriji: Ibdel il-batteriji fil-kontroll remot.
• Linja tal-Vista: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Garanzija Limitata

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• Proġekter: garanzija limitata ta '5 snin
• Partijiet u Xogħol: 2-year coverage
• Lamp: Garanzija limitata ta' 6 xahar

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.

9.2 Appoġġ għall-Klijent

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support websit.