American DJ H20 LED Powered Water and Fire Effect Light

Introduzzjoni

The American DJ H20 LED is a versatile lighting fixture designed to project simulated water and fire effects. Utilizing a powerful 10W LED light source, this unit creates dynamic visual environments suitable for various applications, including mood lighting, background effects, and stage enhancements. Its robust construction and efficient LED technology ensure long-lasting performance with minimal heat output and low power consumption.

Informazzjoni dwar is-Sigurtà

Please read and understand all safety instructions before installing, operating, or maintaining the H20 LED fixture. Failure to do so may result in electric shock, fire, or personal injury.

• Dejjem qabbad l-unità ma' sokit tal-elettriku ertjat.
• Tiżgura l-voltage matches the unit's requirements (115V/60Hz or 230V/50Hz).
• Tesponix l-unità għax-xita jew l-umdità.
• Disconnect from power before performing any service or maintenance.
• Kun żgur li jkun hemm ventilazzjoni adegwata madwar l-unità biex tevita li tissaħħan iżżejjed.
• Evita l-espożizzjoni diretta tal-għajnejn għas-sors tad-dawl.
• Dan il-prodott fih kimiċi magħrufa mill-Istat ta’ Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.

Karatteristiċi

• Bright 10W LED simulated water flowing effect.
• Designed for projection on walls, ceilings, or floors, with or without fog.
• Equipped with 2 glass effect wheels and 1 independent dichroic color wheel.
• Features 6 colors: Orange, Green, Blue, Yellow, Purple, and White.
• High-tech plastic molded ends provide protection during transport and daily use.
• Manual focusing lens for precise image adjustment.
• Two operational modes: seamless scrolling colors or single color operation.
• Includes 2 replaceable lenses to change beam angle to 34 or 52 degrees.
• Comes with a hanging bracket for easy installation.
• Designed for continuous operation; unit stays cool with no duty cycle required.
• Low power consumption: 22W.
• Long life 10W LED with a 30,000-hour rating.
• Voltage: 115V/60Hz or 230V/50Hz (IEC Plug).

Setup

Follow these steps to set up your H20 LED effect light:

1. Spakkjar: Carefully remove the unit from its packaging. Inspect for any damage during shipping.
2. Voltage Għażla: Tiżgura l-voltage selector switch (located on the rear of the unit) is set to the correct voltage għar-reġjun tiegħek (115V jew 230V).
3. Immuntar: Use the included hanging bracket to securely mount the fixture. Ensure the mounting surface can support the unit's weight (8 lbs / 4 kg). The unit can be ceiling-mounted or placed on a stable surface.
4. Konnessjoni tal-Enerġija: Connect the IEC power cable to the unit and then to a grounded power outlet.
5. Installazzjoni tal-lenti: The unit comes with two replaceable lenses (34-degree and 52-degree). Choose the appropriate lens based on your desired beam angle and projection distance.

Figura 1: Angolu ta' quddiem view of the American DJ H20 LED light, showing the projection lens and mounting bracket.

Figura 2: Wara view of the American DJ H20 LED light, showing the power input and voltagswiċċ tas-selettur.

Operazzjoni

Once the unit is powered on, it will begin projecting the effect. Adjust the settings as follows:

• Aġġustament tal-Focus: Rotate the manual focusing lens on the front of the unit to achieve a clear and sharp projection on your desired surface.
• Modi ta' Effett: The H20 LED offers two operational modes:
  • Seamless Scrolling Colors: The unit will automatically cycle through its 6 available colors, creating a dynamic and continuously changing effect.
  • Single Color Operation: Select a specific color to maintain a static color projection. Refer to the unit's controls for color selection (specific control details not provided in input, assuming a simple switch or dial).
• Pjazzament: Experiment with different distances and angles to achieve the desired coverage and intensity of the water or fire effect. The effect is visible with or without fog.

Figura 3: Eżample of the water effect projection on a surface, showing dynamic light patterns.

Figura 4: Eżample of the fire effect projection, demonstrating the warm, flickering light.

Figure 5: The H20 LED projecting various colors including orange, green, blue, yellow, purple, and white.

Manutenzjoni

The H20 LED is designed for low maintenance. Regular cleaning will help ensure optimal performance and longevity.

• Tindif: Periodically clean the exterior of the unit with a soft, dry cloth. For the lens, use a soft, lint-free cloth and a mild glass cleaner. Ensure no liquid enters the unit.
• Ħajja LED: The 10W LED has a long life rating of 30,000 hours, minimizing the need for lamp sostituzzjoni.
• Operazzjoni Kessaħ: The unit stays cool during operation, eliminating the need for duty cycles and reducing thermal stress on components.

Issolvi l-problemi

If you experience issues with your H20 LED, refer to the following common problems and solutions:

Speċifikazzjonijiet

Figure 6: Dimensional diagram of the American DJ H20 LED, showing length, width, and height measurements.

Garanzija u Appoġġ

For warranty information and technical support, please refer to the official ADJ Products webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Għal aktar għajnuna, tista' żżur il- ADJ Store on Amazon.