Manwal tal-Utent tat-Termostat Mekkaniku Mhux Programmabbli LUX Pro PSD010B

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD010B Mechanical Non-Programmable Thermostat. This thermostat is designed for use with 1 Heat Only systems, including fireplaces, stoves, and in-floor radiant heating. It does not require a fan switch and is battery-powered for reliable operation.

Stampa 1.1: Quddiem view of the LUX Pro PSD010B Thermostat, displaying a temperature of 72 degrees Fahrenheit on its digital screen, along with up and down arrow buttons for temperature adjustment.

Stampa 1.2: The LUX Pro PSD010B Thermostat mounted on a wall in a contemporary living room, demonstrating its discreet integration into a home environment.

2. Informazzjoni dwar is-Sigurtà

• Dejjem itfi l-enerġija lis-sistema tat-tisħin mill-fjus prinċipali jew mill-pannell tas-salvavita qabel ma tinstalla jew tagħmel manutenzjoni fuq it-termostat.
• Dan it-termostat huwa ddisinjat għal vultaġġ baxxtage (24V) heating systems or millivolt systems. Do not use with line voltagSistemi e (120V/240V).
• Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u jikkonformaw mal-kodiċijiet elettriċi lokali.
• Armi l-batteriji skont ir-regolamenti lokali. Tirqadx il-batteriji.

3. Kontenut tal-Pakkett

Ivverifika li l-pakkett tiegħek fih l-oġġetti li ġejjin:

Stampa 3.1: Visual representation of the items included in the product box: the PSD010B thermostat, two AA LR6 batteries, two ST screws, two wall anchors, and wire labels.

• LUX Pro PSD010B Thermostat
• 2 Batteriji AA LR6
• 2 Mounting Screws (ST screws)
• 2 Ankri tal-Ħitan
• Tikketti tal-Wajer
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Installazzjoni

4.1 Lista ta 'Kontroll ta' Qabel l-Installazzjoni

• Ensure your heating system is compatible (see Section 6: System Compatibility).
• Gather necessary tools: Phillips screwdriver, wire strippers (if needed), drill (if installing wall anchors).
• Turn off power to your heating system at the circuit breaker or fuse box.

4.2 It-Tneħħija tat-Termostat il-Qadim Tiegħek

1. Turn off the power to your heating system.
2. Neħħi l-għatu tat-termostat il-qadim tiegħek.
3. Note the wire connections. This thermostat is designed for 2-wire heat-only systems. Label the wires (e.g., R and W) using the provided wire labels.
4. Skonnettja l-wajers u neħħi l-bażi l-qadima tat-termostat mill-ħajt.

4.3 Immuntar tat-Termostat il-Ġdid

1. Issepara l-għatu ta' quddiem mill-bażi tat-termostat.
2. Position the thermostat base on the wall where the old thermostat was located. Ensure it is level.
3. Mark the mounting holes. If new holes are required, drill pilot holes and insert wall anchors if mounting into drywall.
4. Waħħal il-bażi tat-termostat mal-ħajt billi tuża l-viti pprovduti.

4.4 Wajers

The PSD010B is compatible with 2-wire heat-only systems. Connect the wires from your heating system to the terminals on the thermostat base. Typically, these are R (power) and W (heat call) wires. Ensure connections are tight.

4.5 Installazzjoni tal-batterija

1. Insert the two AA batteries into the battery compartment on the back of the thermostat, observing the correct polarity (+/-).
2. Waħħal l-għatu ta' quddiem mal-bażi tat-termostat.
3. Restore power to your heating system at the main fuse or circuit breaker panel.

5. Operazzjoni

5.1 Display and Controls Overview

Stampa 5.1: Diagram illustrating the controls of the LUX Pro PSD010B Thermostat, highlighting the large backlit display, quick and easy temperature change buttons (up/down arrows), and the Heat/Off mode slide switch on the side.

• Wirja Diġitali: Shows the current room temperature and the set temperature. It is backlit for easy reading.
• Buttuni 'l fuq /' l isfel: Used to adjust the desired temperature setting.
• Mode Slide Switch: Located on the side of the thermostat. Select 'HEAT' for heating operation or 'OFF' to turn the system off.

5.2 Issettjar tat-Temperatura

To adjust the desired temperature, use the Up or Down arrow buttons. The display will show the set temperature as you adjust it, then revert to showing the current room temperature after a few seconds. The thermostat will automatically activate your heating system when the room temperature falls below your set temperature.

5.3 Għażla tal-Modalità

Use the slide switch on the side of the thermostat to select the operating mode:

• SĦANA: It-termostat jikkontrolla s-sistema tat-tisħin tiegħek biex iżomm it-temperatura ssettjata.
• MITFI: The heating system will remain off.

5.4 Fahrenheit/Celsius Selection

The thermostat allows selection between Fahrenheit and Celsius temperature display. Refer to the detailed specifications or the full manual for instructions on how to switch this setting, typically involving a button combination or a switch on the circuit board.

5.5 Adjustable Temperature Limits

The thermostat features adjustable temperature limits, allowing you to set a minimum and maximum temperature range. This prevents the temperature from being set too high or too low. Consult the full manual for instructions on how to configure these limits.

6. Kompatibilità tas-Sistema

The LUX Pro PSD010B thermostat is designed for specific heating systems. Please review the compatibility information below before installation.

Stampa 6.1: A chart detailing the system compatibility of the LUX Pro PSD010B Thermostat. It is compatible with 2-wire Hydronic (Hot Water), 750 Millivolt, and Gas Fireplaces (24V). It is not compatible with Heat Pump Multistage, Radiant Ceiling Heat, Electric Baseboards, Heat Pump w/ Auxiliary Heat, Portable space heaters, 3-wire Hydronic (Hot Water), Gas/Oil/Electric Furnace - Multistage, Multis Kessaħtage, Cooling only, Plug-in air conditioners, Heat Pump w/o Auxiliary Heat, Gas/Oil/Electric Furnace - Heating only, and Gas/Oil/Electric Furnace - Single Stage.

Compatible Systems (Heat Only - 24V or Millivolt)

• 2-wire Hydronic (Hot Water) systems
• 750 Millivolt systems (e.g., gas fireplaces, floor furnaces)
• Gas Fireplaces (24V)

Mhux Kompatibbli Ma '

• Heat Pump Multistagsistemi e
• Radiant Ceiling Heat
• Electric Baseboards
• Pompa tas-Sħana b'Sħana Awżiljarja
• Portable space heaters
• 3-wire Hydronic (Hot Water) systems
• Gas/Oil/Electric Furnace - Multistage
• Cool Multistagsistemi e
• Cooling only systems
• Plug-in air conditioners
• Pompa tas-Sħana mingħajr Sħana Awżiljarja
• Gas/Oil/Electric Furnace - Heating only (if it requires a fan control)
• Gas/Oil/Electric Furnace - Single Stage (if it requires a fan control)

7. Manutenzjoni

7.1 Sostituzzjoni tal-batterija

The thermostat is powered by two AA batteries. When the battery power is low, a low battery indicator will appear on the display. Replace batteries annually or when the low battery indicator appears to ensure continuous operation.

1. Gently pull the bottom of the thermostat cover forward to release it from the base.
2. Neħħi l-batteriji AA qodma.
3. Daħħal żewġ batteriji alkalini AA ġodda, waqt li tiżgura l-polarità korretta.
4. Snap the cover back onto the thermostat base.

7.2 Tindif

Naddaf il-barra tat-termostat b'ċarruta ratba uamp drapp. Tużax prodotti tat-tindif jew solventi li joborxu. Evita li tisprejja likwidi direttament fuq it-termostat.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

Stampa 9.1: A detailed list of features for the LUX Pro PSD010B Thermostat, including digital, non-programmable operation, battery power, temperature range of 40°F to 90°F, clean design, large backlit display, easy installation, F/C selectable display, 5-minute minimum run/off time, and adjustable temperature stop.

• Mudell: PSD010B
• Tip: Mechanical, Non-Programmable
• Kompatibilità tas-Sistema: 1 Heat Only (2-wire Hydronic, 750 Millivolt, 24V Gas Fireplaces)
• Sors tal-Enerġija: 2 Batteriji AA (inklużi)
• Firxa tat-Temperatura: 40°F sa 90°F (4°C sa 32°C)
• Tip ta' wiri: LCD diġitali, b'dawl minn wara
• Tip ta' Kontroll: Button Control (Up/Down arrows), Slide Switch (Heat/Off)
• Dimensjonijiet: 1.13"D x 5"W x 3.5"H
• Piż tal-oġġett: 0.4 Lira (6.4 uqija)
• Voltage: 24 Volts (compatible with millivolt systems)
• Materjal: Plastik
• Tip ta 'Immuntar: Mount Wall
• UPC: 021079070107

10. Garanzija u Appoġġ

It-Termostat LUX Pro PSD010B jiġi ma’ Garanzija Limitata ta' 5 Snin, ensuring reliable performance and peace of mind. For warranty claims, technical assistance, or further inquiries, please refer to the contact information provided with your product packaging or visit the official LUX websit.

Stampa 10.1: The LUX Pro PSD010B Thermostat displayed with icons highlighting its key features: a backlit display, adjustable temperature limits, battery-only power, and a 5-year limited warranty.