Westek TM1609DHB 2-Outlet Indoor Daily Mechanical Timer

1. Introduzzjoni

The Westek TM1609DHB is a heavy-duty daily mechanical timer designed to automate the on/off cycles of various indoor electrical devices. This timer features two grounded outlets and a simple-to-use dial for programming up to 24 on/off settings per day.

Karatteristiċi ewlenin:

• Daily Mechanical Timer: Automates power to lights, heaters, fans, and other devices.
• Programmabbli: Allows up to 24 on/off settings per day using non-removable pins.
• Ħwienet Doppju: Control two devices simultaneously with a single timer.
• Override manwali: Front-mounted switch for easy manual operation.
• Effiċjenti fl-Enerġija: Helps reduce electricity consumption by operating devices only when desired.

Kontenut tal-Pakkett:

• Westek TM1609DHB 2-Outlet Indoor Daily Mechanical Timer
• Manwal ta 'Istruzzjoni (dan id-dokument)

2. Informazzjoni dwar is-Sigurtà

Jekk jogħġbok aqra u ifhem l-istruzzjonijiet kollha tas-sigurtà qabel ma tuża dan il-prodott. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew ħsara lill-proprjetà.

• Għal użu fuq ġewwa biss. Tesponix għall-ilma jew għall-umdità.
• Teċċedix il-klassifikazzjoni massima tat-tagħbija ta' 15 Amps, 1875 Watts Resistive, 1250 Watts Tungsten.
• Ensure the timer is securely plugged into a grounded 125VAC, 60Hz outlet.
• Do not use with appliances that could cause a hazardous condition if left unattended, such as heating appliances without automatic shut-off.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Do not disassemble or modify the timer. There are no user-serviceable parts inside.

3. Prodott Aktarview

Familiarize yourself with the components of your Westek TM1609DHB timer.

Stampa 1: Quddiem view of the Westek TM1609DHB timer. This image displays the main programming dial, which is divided into 24 hours with AM and PM markings. The central part of the dial indicates "PINS DOWN = ON, UP = OFF". A slider switch is visible at the top, labeled "OUTLET ON" and "TIMER ON".

Stampa 2: Ġenb view of the Westek TM1609DHB timer, highlighting one of the two three-prong grounded outlets located on the sides of the unit. This view also shows the thickness of the timer and part of the programming dial.

Komponenti:

• Programming Dial: A rotating dial marked with 24 hours (AM/PM) for setting the current time and programming on/off cycles.
• Programmable Pins: Non-removable segments around the dial. Each segment represents 30 minutes. Pushing a pin DOWN activates the connected device during that time; leaving it UP deactivates it.
• Swiċċ Manwal Override: Located at the top, this slider switch allows you to bypass the timer settings and manually turn the connected devices ON or OFF.
• Ħwienet bl-art: Two three-prong outlets, one on each side of the timer, for connecting your devices.
• Ipplaggja l-Enerġija: A three-prong grounded plug on the back of the unit for connecting the timer to a wall outlet.

4. Setup u Installazzjoni

4.1 Issettjar tal-Ħin Attwali

1. Locate the arrow on the inner white dial, labeled "TIME". This arrow indicates the current time.
2. Rotate the entire outer dial clockwise until the current time aligns with the "TIME" arrow. Ensure you correctly distinguish between AM and PM hours. For example, if it's 3 PM, align '3 PM' on the dial with the arrow.

4.2 Programming On/Off Times

The outer ring of the dial consists of multiple pins, each representing a 30-minute interval. These pins are non-removable.

1. To set a device to turn ON, push the corresponding pins DOWN for the desired time duration.
2. To set a device to turn OFF, leave the corresponding pins UP for the desired time duration.
3. You can program up to 24 ON/OFF settings per day.

Example: If you want a light to turn on from 6 PM to 10 PM, push down all the pins between the '6 PM' and '10 PM' markings on the dial.

4.3 Apparat li jgħaqqad

1. Ensure the timer is unplugged from the wall outlet before connecting any devices.
2. Plug the device(s) you wish to control into the grounded outlets on the sides of the timer.
3. Plug the Westek TM1609DHB timer into a standard 125VAC, 60Hz grounded wall outlet.

5. Operazzjoni

Swiċċ Manwal Override

The slider switch at the top of the timer allows you to manually control the power to the connected devices, overriding the programmed settings.

• Slide the switch to "OUTLET ON" to keep the connected devices continuously ON, regardless of the timer settings.
• Slide the switch to "TIMER ON" to enable the programmed ON/OFF cycles. The devices will operate according to your pin settings.

6. Manutenzjoni

The Westek TM1609DHB timer requires minimal maintenance.

• Tindif: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Ħażna: If storing the timer for an extended period, ensure it is unplugged and kept in a dry, cool place.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

Stampa 3: Lura view of the Westek TM1609DHB timer, displaying the three-prong power plug and a label with product specifications including model number, electrical ratings, and manufacturing information.

9. Garanzija u Appoġġ

Informazzjoni dwar il-garanzija:

This Westek TM1609DHB timer comes with a Garanzija limitata ta 'sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modification, or improper installation.

Appoġġ għall-Klijent:

For technical assistance, troubleshooting, or warranty claims, please contact Westek customer support. Refer to the packaging or the official Westek webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.

Tista 'żżur il- Ħanut Westek fuq Amazon għal aktar informazzjoni dwar il-prodott.