1. Prodott Aktarview
The CTEK Comfort Indicator Eyelet M8 is a practical accessory designed to provide a quick connection point for CTEK battery chargers and to visually indicate the battery's charge status. It features an 8mm eyelet for permanent connection to hard-to-reach 12V lead-acid batteries and is compatible with CTEK chargers up to 10A. The integrated LED indicator simplifies battery monitoring.
2. Informazzjoni dwar is-Sigurtà
- Always disconnect the battery charger from the mains before connecting or disconnecting the eyelet connector to the battery.
- Ensure correct polarity when connecting the eyelets to the battery terminals (red to positive, black to negative).
- Do not expose the indicator eyelet to excessive moisture or extreme temperatures.
- Żomm fejn ma jintlaħaqx mit-tfal.
- This product is designed for 12V lead-acid batteries only. Do not use with other battery types.
- Avoid short-circuiting the eyelet terminals.
3. Kontenut tal-Pakkett
- 1 x CTEK Comfort Indicator Eyelet M8 (Model 56-382)
Image: The CTEK Comfort Indicator Eyelet M8 shown with its retail packaging.
4. Gwida għall-Installazzjoni
Follow these steps to properly install the CTEK Comfort Indicator Eyelet M8 to your vehicle's battery:
- Ipprepara l-batterija: Ensure the vehicle is turned off and the ignition is in the OFF position. Locate your vehicle's 12V lead-acid battery.
- Connect the Eyelets:
- Ħoll il-ġewż fuq it-terminal pożittiv (+) tal-batterija.
- Place the red eyelet connector onto the positive (+) battery post, ensuring good contact.
- Issikka l-iskorfina sew.
- Repeat the process for the negative (-) battery terminal with the black eyelet connector.
Image: Red and black eyelet connectors for battery terminal attachment.
- Secure the Fuse Holder: The red cable includes an inline fuse holder. Ensure this fuse holder is securely closed and positioned in a safe, accessible location away from moving parts or extreme heat.
Image: Detail of the inline fuse holder, showing the blue 15A fuse.
- Position the Indicator: Route the cable and the indicator unit to a convenient location where the LED lights are easily visible and the connector is accessible for your CTEK charger. The comfort indicator eyelet comes with an end cap to protect the connector when not in use.
Image: The quick connector end of the eyelet, with its protective cap.
5. Istruzzjonijiet Operattivi
The CTEK Comfort Indicator Eyelet M8 features a simple LED 'traffic light' system to show the battery's charge status:
- Dawl aħdar: Indicates the battery charge is above 80%. The battery is in good condition and does not require charging.
- Dawl Isfar: Indicates the battery charge is above 60% but below 80%. The battery should be charged soon.
- Dawl aħmar: Indicates the battery charge is below 60%. The battery requires immediate charging.
To charge your battery, simply connect your compatible CTEK charger (up to 10A) to the quick connector of the indicator eyelet. Once charging is complete, disconnect the charger and replace the protective end cap on the eyelet connector.
6. Manutenzjoni
The CTEK Comfort Indicator Eyelet M8 requires minimal maintenance. Periodically inspect the eyelet connections to the battery terminals to ensure they remain clean and secure. Check the cable for any signs of wear or damage. Keep the quick connector clean and ensure the protective end cap is in place when not connected to a charger to prevent dirt and moisture ingress.
7 Issolvi l-problemi
- L-ebda indikazzjoni LED:
- Check if the eyelet connectors are securely attached to the battery terminals.
- Verify the battery has sufficient voltage (above approximately 3V) for the indicator to function.
- Inspect the inline fuse. If blown, replace it with a fuse of the same rating (typically 15A).
- Incorrect LED Indication:
- Ensure the battery is a 12V lead-acid type. This indicator is not designed for other battery chemistries or voltages.
- Confirm the battery terminals are clean and free of corrosion, which can affect voltage qari.
- If the issue persists, consult a professional or contact CTEK support.
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | 56-382 |
| Eyelet Size | M8 (8mm) |
| Kompatibilità | All 12V Lead-Acid Batteries & CTEK Chargers up to 10A |
| Indikatur LED | Red (<60%), Yellow (60-80%), Green (>80%) |
| Tul tal-Cable | 0.55m |
| Kurrent Max | 10A |
| Piż tal-oġġett | 1.6 uqija |
| Dimensjonijiet tal-Prodott (L x W x H) | 3.31 x 1.73 x 3.78 pulzieri |
| Klassifikazzjoni tas-Sigurtà | IP65 |
| UPC | 785422840815 |
| GTIN | 07350009563826 |
9. Garanzija u Appoġġ
CTEK products are delivered with a warranty from the original purchase date. The product description states a 5-year limited warranty, while feature bullets mention a 2-year warranty. Please refer to your product packaging or original purchase documentation for the exact warranty period applicable to your specific unit.
The limited warranty covers manufacturing faults or material defects. It is not transferable and is only honored if the product and original receipt are returned together to the retailer. The warranty is void if the product has been opened, handled carelessly, or repaired by anyone other than a CTEK Power representative or its authorized representatives.
For support or warranty claims, please contact your retailer or visit the official CTEK websit għal informazzjoni ta' kuntatt.
