Introduzzjoni
This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Intex 10-Feet x 30-Inch Easy Set Pool. Please read all instructions carefully before assembly and use. Retain this manual for future reference.
Informazzjoni Importanti dwar is-Sigurtà
- Qatt tħalli t-tfal waħedhom fil-pixxina jew qribha.
- Is-superviżjoni tal-adulti hija meħtieġa f'kull ħin.
- Tgħaddasx jew taqbeżx fil-pixxina.
- Ensure the pool is set up on firm, level ground.
- Segwi r-regolamenti lokali kollha rigward is-sigurtà tal-pixxini u l-ilqugħ.
Setup Istruzzjonijiet
Proper site preparation and assembly are crucial for the longevity and safety of your Easy Set Pool. Follow these steps carefully.
1. Preparazzjoni tas-Sit
Select a firm, level area in your backyard. Remove any sharp objects, debris, or uneven surfaces. The area should be slightly larger than the pool's diameter (10 feet).
Image: A prepared ground area with a blue tarp and grey yoga mats laid out, indicating a level and cushioned base for the pool.
It is recommended to place a ground cloth or tarp (not included) under the pool for added protection against punctures and to provide a slightly softer base. Some users also place foam mats or old yoga mats for extra cushioning.
2. Unpacking and Spreading the Pool Liner
Carefully unpack the pool from its box. Allow the pool liner to warm up in the sun for easier unfolding and to reduce wrinkles. Spread the pool liner evenly on the prepared, level ground.
Image: The blue and white checkered pool liner is spread out on a grassy area, ready for inflation and filling.
3. Inflating the Top Ring
Locate the inflation valve on the top ring of the pool. Use an air pump (electric pump recommended for efficiency) to inflate the top ring until it is firm but not over-inflated. Ensure the valve is securely closed after inflation.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
4. Filling the Pool with Water
Begin filling the pool with water using a garden hose. As the water level rises, the pool walls will naturally rise and take shape. Smooth out any wrinkles on the bottom of the pool as it fills. Stop filling when the water reaches the indicated fill line, typically just below the inflated top ring.
Image: An Intex Easy Set Pool filled with water, with children enjoying themselves, demonstrating the pool's capacity and recreational use.
5. Konnessjoni tal-Pompa tal-Filtru
Connect the included filter pump to the designated inlet and outlet fittings on the pool liner. Ensure all connections are secure to prevent leaks. Refer to the separate filter pump manual for detailed assembly and operation instructions for the pump.
Image: A close-up of the Intex Easy Set Pool showing the filter pump connected to the pool's side, with hoses running to and from the pump.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
It-Tħaddim tal-Pixxina Tiegħek
Once set up, your Intex Easy Set Pool is ready for use. Follow these guidelines for optimal enjoyment.
Livell tal-Ilma
Maintain the water level between the upper and lower fill lines. Overfilling can strain the pool structure, while underfilling can affect pump performance.
Operazzjoni tal-Pompa tal-Filtru
Operate the filter pump daily to ensure proper water circulation and filtration. The recommended run time is typically 2-4 hours per day, depending on usage and water clarity. Consult the pump manual for specific timer settings.
Manutenzjoni
Regular maintenance is essential to keep your pool water clean and safe.
Kimika tal-Ilma
Test your pool water regularly using a pool test kit. Adjust pH, alkalinity, and sanitizer levels (e.g., chlorine) as needed to maintain proper balance. Follow the chemical manufacturer's instructions for dosage.
Tindif tal-Pixxina
- Skimming: Uża xibka tal-iskimmer tal-pixxina biex tneħħi l-weraq, l-insetti, u debris ieħor mill-wiċċ tal-ilma kuljum.
- Vacuuming: Periodically vacuum the bottom of the pool to remove settled debris. A garden hose with suction can be used for this purpose.
- Tindif tal-Liner: Gently wipe down the pool liner with a soft brush or cloth to prevent algae buildup.
Filter Cartridge Care
The filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, or as needed, depending on pool usage and water conditions. A dirty filter cartridge reduces pump efficiency.
Issolvi l-problemi
Hawn huma soluzzjonijiet għal kwistjonijiet komuni li tista' tiltaqa' magħhom:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ilma Imdardar | Poor filtration, chemical imbalance, high debris load. | Run pump longer, clean/replace filter, adjust water chemistry, shock treat pool. |
| Tkabbir tal-Alka | Livelli baxxi ta' sanitizzatur, ċirkolazzjoni ħażina. | Shock treat with algaecide, brush pool walls, ensure proper filtration. |
| Leaking Pool | Puncture in liner, loose hose connections. | Sib u rranġa t-toqba bil-kit tat-tiswija, issikka l-klampi kollha tal-pajpamps. |
| Pompa Mhux Taħdem | Problema bl-enerġija, filtru misdud, arja fis-sistema. | Check power supply, clean filter, bleed air from pump. |
Speċifikazzjonijiet
- Ditta: Intex
- Mudell: 56921EG
- Approximate Set-up Size: 10 ft x 30 in (305cm x 76cm)
- Kapaċità tal-Ilma (80%): 1,018 Gal (3,853 L)
- Materjal: Klorur tal-polivinil (PVC)
- Komponenti Inklużi: Filter Pump (530 gallon/hour flow rate)
- Assemblaġġ Meħtieġa: No (Easy Set-up)
- Użu fuq ġewwa/barra: Barra
- Piż tal-oġġett: 24.6 Liri
Garanzija u Appoġġ
For warranty information, product registration, or technical support, please refer to the documentation included with your product or visit the official Intex websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Informazzjoni ta' Kuntatt: Refer to your product packaging or the Intex webis-sit għad-dettalji ta' kuntatt tas-servizz tal-konsumatur l-aktar aġġornati.
