Greenlee 39265

Greenlee 39265 Flessibbli Mandrel Cable Puller - Manwal ta' Istruzzjoni tad-Daqs tal-Kanal ta' 2 Pulzieri

Mudell: 39265

1. Prodott Aktarview

The Greenlee 39265 Flexible Mandrel Cable Puller is designed for preparing 2-inch ducts prior to cable installation. Its primary function is to clear out minor obstructions such as mud, dirt, and light debris, ensuring a clean path for cables.

This mandrel features a flexible design with convex contacts between its polyurethane disks, allowing it to navigate tight bends within ducts. The tapered profile and pulling eyes on both ends enable bidirectional pulling. The polyurethane disks are engineered to prevent damage to the inner walls of the duct during operation.

Greenlee 39265 Flexible Mandrel Cable Puller for 2-Inch Ducts

Figure 1: Greenlee 39265 Flexible Mandrel Cable Puller. This image displays the mandrel's construction, featuring a series of red polyurethane disks connected by a central rod, with steel pulling eyes securely attached at both ends.

2. Setup

  1. Inspect the Mandrel: Before each use, visually inspect the Greenlee 39265 mandrel for any signs of damage, wear, or defects. Ensure the pulling eyes are securely attached and the polyurethane disks are intact.
  2. Ipprepara l-Kanal: Ensure the duct intended for cable installation is accessible at both ends. Remove any large, visible debris that could obstruct the mandrel.
  3. Attach Pulling Line: Securely attach a suitable pulling line (e.g., rope, tape, or wire) to one of the pulling eyes on the mandrel. Ensure the connection is robust enough to withstand the anticipated pulling force.
  4. Insert into Duct: Carefully insert the mandrel into one end of the 2-inch duct.

3. Istruzzjonijiet Operattivi

  1. Initiate Pulling: From the opposite end of the duct, begin to pull the line attached to the mandrel. Apply steady and consistent force.
  2. Immonitorja l-Progress: Observe the mandrel's movement through the duct. The flexible design allows it to navigate bends effectively.
  3. Ostakli ċari: The mandrel is designed to clear mud, dirt, and light obstacles. If significant resistance is encountered, do not apply excessive force. Instead, attempt to pull the mandrel back slightly and then forward again to dislodge the obstruction.
  4. Bidirectional Use: Due to its tapered profile and pulling eyes on both ends, the mandrel can be pulled in either direction if needed. This can be useful for dislodging stubborn debris.
  5. Complete the Pull: Continue pulling until the mandrel emerges from the other end of the duct, indicating a clear path.
  6. Remove Mandrel: Detach the pulling line from the mandrel.

4. Manutenzjoni

5 Issolvi l-problemi

6. Speċifikazzjonijiet

AttributValur
ManifatturGreenlee
Numru tal-Parti39265
Piż tal-oġġett1 liri
Dimensjonijiet tal-Prodott10 x 10 x 12 pulzieri
Numru tal-Mudell tal-Oġġett39265
Daqs2-Inch Duct Size
MaterjalPolyurethane, Plastic
Maximum Pulling Force2330 lb
Maximum Disk Size1.88 pulzier

7. Garanzija u Appoġġ

Informazzjoni dwar Garanzija

L-oġġetti manifatturati minn Greenlee Textron huma garantiti li huma ħielsa minn difetti fix-xogħol u fil-materjal għal perjodu ta' sena mid-data tax-xiri tal-utent. Din il-garanzija hija valida sakemm tali oġġetti jiġu installati, imħaddma, użati u miżmuma skont l-istruzzjonijiet bil-miktub ta' Greenlee.

Appoġġ għall-Klijent

For technical assistance, warranty claims, or further information regarding the Greenlee 39265 Flexible Mandrel Cable Puller, please contact Greenlee customer support directly. Refer to the official Greenlee webis-sit jew l-imballaġġ tal-prodott għad-dettalji ta' kuntatt attwali.

You can visit the official Greenlee store for more products and support information: Greenlee Store fuq Amazon.

Dokumenti Relatati - 39265

Preview Manwal ta' Istruzzjoni għall-Greenlee Ultra Tugger 6800 u 6805A Cable Puller u l-Pakketti tal-Ġbid
This manual provides detailed instructions for the safe operation and maintenance of the Greenlee 6800 and 6805A Ultra Tugger cable pullers. It covers safety information, identification of components, specifications, cable pulling principles, typical setups, and operational procedures.
Preview Manwal tal-Istruzzjonijiet tal-Liwi tas-Segmenti Greenlee 777
Manwal ta' struzzjonijiet għall-Greenlee 777 Segment Bender, li jipprovdi gwida dettaljata dwar tħaddim sikur, setup, tekniki ta' liwi, manutenzjoni, u identifikazzjoni tal-partijiet għal din l-għodda li tgħawweġ il-kondotti.
Preview Manwal tal-Istruzzjonijiet għat-Termometru tal-Infra-aħmar Greenlee TG-1000
Manwal ta' struzzjonijiet komprensiv għat-Termometru Infra-aħmar Greenlee TG-1000. Tgħallem dwar il-karatteristiċi tiegħu, it-tħaddim sikur, il-manutenzjoni, u s-soluzzjoni tal-problemi għal kejl preċiż tat-temperatura mingħajr kuntatt f'diversi applikazzjonijiet.
Preview Manwal ta' Istruzzjoni għat-Termometru tal-Infra-aħmar u tal-Kuntatt Greenlee TG-2000
Manwal ta' struzzjoni għat-Termometru tal-Infra-aħmar u tal-Kuntatt Greenlee TG-2000, li jiddeskrivi l-karatteristiċi tiegħu, il-prekawzjonijiet ta' sigurtà, it-tħaddim, is-soluzzjoni tal-problemi, l-emissività, l-eżattezza, l-ispeċifikazzjonijiet u l-manutenzjoni.
Preview Manwal tal-Istruzzjonijiet tal-Multimetru Diġitali Greenlee DM-40
Gwida għall-utent għall-Multimetru Diġitali Greenlee DM-40, li tiddeskrivi l-karatteristiċi, l-operat, l-istruzzjonijiet tas-sigurtà, u l-ispeċifikazzjonijiet tiegħu għall-ittestjar elettriku.
Preview Greenlee 1990 Dieless Hydraulic Crimping Tool Service Manual
Comprehensive service manual for the Greenlee 1990 Dieless Hydraulic Crimping Tool (Serial Codes WH and YM), detailing operation, maintenance, repair, safety, troubleshooting, and parts.