The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 Tester for the Air User Manual
Model: GOX 100 (Part Number: 600437)
1. Introduzzjoni
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Informazzjoni dwar is-Sigurtà
- Read this manual thoroughly before operating the device.
- Tesponix l-apparat għal temperaturi estremi, dawl tax-xemx dirett, jew umdità eċċessiva.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Żomm l-apparat u l-komponenti tiegħu fejn ma jintlaħqux mit-tfal.
- Armi l-batteriji u l-apparat skont ir-regolamenti lokali.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Manwal għall-Utent
- 9V Block Battery (may not be included, check packaging)
4. Setup
4.1 Installazzjoni tal-batterija
- Sib il-kompartiment tal-batterija fuq wara tal-apparat.
- Iftaħ l-għatu tal-kompartiment tal-batterija.
- Insert a 9V block battery, ensuring correct polarity.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
4.2 Konnessjoni tas-Sensor
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.
The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Istruzzjonijiet Operattivi
5.1 Tixgħel/Jitfi
- Biex tixgħel l-apparat, agħfas il- mixgħul/mitfi buttuna. Id-displej se jixgħel.
- Biex itfi l-apparat, agħfas u żomm il- mixgħul/mitfi buttuna sakemm il-wiri jintefa.
5.2 Teħid ta 'Kejl
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- Agħfas il- mod button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Kalibrazzjoni
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- Agħfas u żomm il- kal button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.
The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Manutenzjoni
7.1 Sostituzzjoni tas-Sensor
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Itfi l-apparat.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Agħmel kalibrazzjoni kif deskritt fit-Taqsima 6.
7.2 Tindif
- Naddaf l-apparat casing b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
8 Issolvi l-problemi
| Problema | Kawża / Soluzzjoni Possibbli |
|---|---|
| L-apparat ma jixgħelx | Check battery installation and charge. Replace battery if necessary. |
| Qari mhux eżatt | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Display shows 'Err' or similar | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Speċifikazzjonijiet Tekniċi
| Parametru | Valur |
|---|---|
| Medda ta' Kejl | 0 - 100 % Oxygen |
| Riżoluzzjoni | 0.1 % |
| Preċiżjoni tal-Kejl | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Provvista tal-Enerġija | 9V blokk batterija |
| Tip ta' Protezzjoni | IP65 |
| Dimensjonijiet (H x W) | 106 mm x 67 mm |
| Piż | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 m |
| Kumpens Termali | Awtomatiku |
10. Garanzija u Appoġġ
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER websit.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fid-dokumentazzjoni tal-prodott tiegħek.
