Introduzzjoni
Grazzi tax-xiriasing the Muse M-12 CR Radio Alarm Clock. This compact and versatile device combines an FM radio with a dual alarm clock, offering convenience and functionality for your daily routine. Featuring a clear red LED display and intuitive controls, the M-12 CR is designed for ease of use. Please read this manual carefully to ensure proper operation and to fully utilize all features of your new alarm clock.
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba:
- Muse M-12 CR Radio Alarm Clock Unit
- Adapter tal-Enerġija
- Manwal għall-Utent (dan id-dokument)
Prodott Overview u Kontrolli
Familiarize yourself with the various parts and controls of your Muse M-12 CR Radio Alarm Clock.
Figura 1: Quddiem u fuq view of the Muse M-12 CR Radio Alarm Clock, highlighting the red LED display and the arrangement of control buttons.
Buttuni tal-Kontroll (Il-Panel ta' Fuq):
- SNOOZE / DIMMER Button: Press to temporarily silence the alarm (snooze function). Press and hold to adjust display brightness.
- Buttuna tal-ALLARM 1: Press to activate/deactivate Alarm 1. Press and hold to set Alarm 1 time.
- Buttuna tal-ALLARM 2: Press to activate/deactivate Alarm 2. Press and hold to set Alarm 2 time.
- Buttuna SET TAL-ĦIN: Press and hold to set the current time.
- HR (Hour) Button: Used to adjust the hour during time or alarm setting.
- MIN (Minute) Button: Used to adjust the minute during time or alarm setting.
- VOL- / PREV Button: Decreases volume. In radio mode, short press for previous preset station, long press for backward auto-scan.
- VOL+ / NEXT Button: Increases volume. In radio mode, short press for next preset station, long press for forward auto-scan.
- FM / MEM Button: Press to switch to FM radio mode. Press and hold to automatically scan and store FM stations.
- Buttuna SLEEP: Jattiva l-funzjoni tat-tajmer tal-irqad.
- NAP Button: Activates the nap timer function.
Setup
1. Konnessjoni tal-Enerġija
- Unpack the Muse M-12 CR unit and the power adapter.
- Insert the DC plug of the power adapter into the DC IN jack located at the back of the unit.
- Plug the power adapter into a standard AC wall outlet (100-240V, 50/60Hz). The display will light up, and the clock will be ready for time setting.
2. Battery Backup (Optional)
Biex iżżomm is-settings tal-ħin u tal-allarm waqt qtugħ tad-dawltage, you can install backup batteries (not supplied). The unit typically uses AAA batteries. Refer to the battery compartment on the bottom of the unit for correct battery type and polarity.
Istruzzjonijiet Operattivi
L-issettjar tal-Ħin
- Agħfas u żomm il- IL-ĦIN IPPOST Agħfas il-buttuna sakemm iċ-ċifri tas-sigħat jibdew jteptep.
- Agħfas il- HR Agħfas il-buttuna ripetutament biex taġġusta s-siegħa.
- Agħfas il- MIN Agħfas il-buttuna ripetutament biex taġġusta l-minuta.
- Agħfas il- IL-ĦIN IPPOST Agħfas il-buttuna mill-ġdid biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.
Issettjar tal-Allarmi (Allarm 1 u Allarm 2)
The M-12 CR features two independent alarms.
- Agħfas u żomm il- ALLARM 1 or ALLARM 2 sakemm iċ-ċifri tas-siegħa tal-allarm jteptep.
- Agħfas il- HR buttuna biex tissettja s-siegħa tal-allarm mixtieqa.
- Agħfas il- MIN buttuna biex tissettja l-minuta tal-allarm mixtieqa.
- Agħfas il- ALLARM 1 or ALLARM 2 button again to select the alarm source (Radio or Buzzer). The corresponding indicator will light up.
- Agħfas il- ALLARM 1 or ALLARM 2 button one more time to confirm and activate the alarm. The alarm indicator (1 or 2) will appear on the display.
Biex tiddiżattiva allarm, agħfas il-buttuna korrispondenti ALLARM 1 or ALLARM 2 button until its indicator disappears from the display.
Radio Operation (FM)
- Agħfas il- FM / MEM button to switch to FM radio mode. The frequency will be displayed.
- Automatic Scan and Store: Agħfas u żomm il- FM / MEM button to automatically scan for and store available FM stations (up to 20 presets).
- Irfinar Manwali: Uża l- VOL- / PREV u VOL+ / NEXT buttons to manually tune to a specific frequency. Long press for auto-scan to the next strong station.
- L-Għażla tal-Presets: Agħfas qasir il- VOL- / PREV or VOL+ / NEXT buttons to cycle through stored preset stations.
- Aġġusta tal-Volum: Uża l- VOL- / PREV u VOL+ / NEXT buttons (when not in tuning mode) to adjust the radio volume.
Funzjoni Snooze
Meta l-allarm jinstema ', agħfas il-buttuna SNOOZE / DIMMER button to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time is usually 9 minutes, refer to specific product behavior if different).
Sleep Timer Funzjoni
It-tajmer tal-irqad jippermettilek torqod bir-radju, li jintefa awtomatikament wara perjodu stabbilit.
- Waqt li r-radju jkun qed idoqq, agħfas il-buttuna L-IRQAD button repeatedly to cycle through available sleep timer durations (e.g., 120, 90, 60, 30, 15, 10, 5 minutes, or OFF).
- Ir-radju jintefa awtomatikament wara l-ħin magħżul.
Nap Timer Funzjoni
The nap timer sets an alarm to sound after a short, predefined period.
- Agħfas il- NAP button repeatedly to select a nap duration (e.g., 120, 90, 60, 30, 15, 10, 5 minutes, or OFF).
- The alarm will sound after the selected nap time has elapsed.
Display Dimmer
Biex taġġusta l-luminożità tal-wiri LED:
- Agħfas il- SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through different brightness levels (e.g., High, Medium, Low, Off).
Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-unità. Tużax prodotti tat-tindif li joborxu, xama', jew solventi għax jistgħu jagħmlu ħsara lill-finitura.
- Pjazzament: Poġġi l-unità fuq wiċċ stabbli u ċatt 'il bogħod mix-xemx diretta, sorsi ta' sħana, u trab jew umdità eċċessiva.
- Ventilazzjoni: Aċċerta ruħek li jkun hemm ventilazzjoni adegwata madwar l-unità biex tevita li tissaħħan iżżejjed. Timblokkax il-fetħiet tal-ventilazzjoni.
- Skonnettjar tal-Enerġija: If the unit is not going to be used for a long period, unplug the power adapter from the wall outlet.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Bla enerġija / Wiri mitfi | Power adapter not connected or faulty. Power outlet not active. | Kun żgur li l-adapter tal-enerġija huwa pplaggjat sew fl-unità u f'sokit tal-ħajt li jaħdem. Ipprova sokit differenti. |
| L-allarm ma ħossx | Alarm not activated. Alarm volume too low (for radio alarm). Incorrect alarm time set. | Ensure the alarm indicator (1 or 2) is visible on the display. Increase radio volume if using radio alarm. Verify alarm time is correctly set. |
| Riċeviment ħażin tar-radju | Antenna not extended or positioned correctly. Interference from other electronic devices. Weak signal in the area. | Fully extend and adjust the FM wire antenna for best reception. Move the unit away from other electronics. Try auto-scanning for stronger stations. |
| Buttuni ma jirrispondux | Problema temporanju tas-sistema. | Unplug the unit from power for a few minutes, then plug it back in to reset. |
Speċifikazzjonijiet
| Mudell | M-12 CR |
| Tip ta 'Wiri | LED (Aħmar) |
| Daqs tal-Wiri | 1.5 ċm (0.6-il pulzier) |
| Frekwenza tar-Radju | FM (with 20 preset stations) |
| Funzjonijiet ta' Allarm | Dual Alarm (Radio or Buzzer), Snooze, Sleep, Timer (Nap) |
| Sors tal-Enerġija | Wired (AC Power Adapter) |
| Dimensjonijiet (L x W x H) | 12.9 x 5.3 x 6.5 ċm (madwar) |
| Piż | 290 g (madwar) |
Figura 2: Approximate dimensions of the Muse M-12 CR unit.
Garanzija u Appoġġ
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Muse websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.
For further assistance, please contact Muse customer service.
