1. Introduzzjoni
Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.
Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.
2. Informazzjoni dwar is-Sigurtà
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- Dejjem skonnettja l-enerġija mis-circuit breaker prinċipali jew mill-kaxxa tal-fjusijiet qabel tibda l-installazzjoni jew twettaq kwalunkwe manutenzjoni.
- Tqabbadx dan l-apparat ma' sistema elettrika mhux ertjata.
- Taqbiżx il-wat massimutage specified for the bulbs (2 x 100-Watt medium base bulbs).
- Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
3. Kontenut tal-Pakkett
Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.
- Fixture Body with Brushed Nickel Finish
- Square Etched Glass Shade
- Mounting Hardware (Crossbar, Screws, Wire Nuts)
- Chain (for hanging installation option)
- Ceiling Mount Canopy (for semi-flush installation option)
- Manwal ta' Istruzzjoni
4. Setup u Installazzjoni
This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.
4.1. Qabel l-Installazzjoni
- Itfi l-enerġija fis-circuit breaker.
- Remove existing fixture (if applicable).
- Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).
4.2. Semi-Flush Mount Installation
- Attach the mounting crossbar to the outlet box using the provided screws.
- Connect the fixture's ground wire to the supply ground wire using a wire nut.
- Connect the fixture's white wire to the supply white (neutral) wire.
- Connect the fixture's black wire to the supply black (hot) wire.
- B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-ħruġ.
- Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
- Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).
Figura 4.1: Dettaljata view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.
4.3. Hanging Fixture Installation (with Chain)
- Follow steps 1-5 from the Semi-Flush Mount Installation.
- Determine the desired hanging length and adjust the chain accordingly.
- Thread the fixture's electrical wires through the chain and the canopy.
- Secure the chain to the mounting loop on the crossbar and to the fixture body.
- Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
- Attach the etched glass shade to the fixture body.
Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.
Figura 4.3: Close-up view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.
5. Istruzzjonijiet Operattivi
Once the fixture is securely installed and wired, you can begin operation.
- Installa Basal: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
- Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker prinċipali.
- Attiva d-Dawl: Use the wall switch connected to the fixture to turn the light on and off.
The etched glass shade provides a softly diffused light, ideal for various indoor settings.
6. Manutenzjoni
Manutenzjoni regolari tgħin biex tippreserva d-dehra u l-funzjonalità tal-apparat tiegħek.
- Tindif: To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp Jista' jintuża drapp, segwit minn drapp niexef.
- Sostituzzjoni tal-bozza: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
- Spezzjoni: Spezzjona l-wajers u l-konnessjonijiet perjodikament għal kwalunkwe sinjal ta’ xedd jew ħsara. Jekk issib xi problemi, ikkonsulta elettriċista kwalifikat.
7 Issolvi l-problemi
Jekk l-apparat tiegħek mhux qed jaħdem sew, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx | Ebda setgħa li twaħħil | Iċċekkja s-circuit breaker jew il-fjus. Kun żgur li s-swiċċ tal-ħajt ikun mixgħul. |
| Id-dawl ma jixgħelx | Konnessjonijiet tal-wajer sfużi | Turn off power, check all wire connections. Secure them firmly. |
| Id-dawl ma jixgħelx | Bozza difettuża | Ibdel il-bozza b'waħda ġdida tat-tip korrett u żommha f'kundizzjoni tajba.tage. |
| Dawl teptip | Bozza maħlula jew wajers | Turn off power, tighten bulb. Check wire connections. |
| Ħoss ta’ twerwir | Swiċċ dimmer inkompatibbli | Ensure dimmer switch is compatible with incandescent bulbs. |
If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.
8. Speċifikazzjonijiet
Detailed technical specifications for the P3597-09 fixture:
| Attribut | Valur |
|---|---|
| Numru tal-Mudell | P3597-09 |
| Dimensjonijiet (Wisa' x Għoli) | 12-3/4 inches (32.38 cm) x 13-5/8 inches (34.61 cm) |
| Dimensjonijiet tal-Prodott (Ġenerali) | 33.02 x 33.02 x 35.56 ċm |
| Piż tal-oġġett | 2.72 kg (6 lbs) |
| Materjal | Glass, Metal (Brushed Nickel Finish) |
| Tip ta' bozza | Incandescent (Medium Base / E26) |
| Numru ta' Basal | 2 |
| Max Wattage għal kull Bulb | 100 Watts |
| Voltage | 120 Volts |
| Metodu ta 'Installazzjoni | Semi Flush Mount / Hanging (Chain Included) |
| Stil | Mission / Craftsman |
| Kulur | Nikil brushed |
Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.
9. Garanzija u Appoġġ
Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting websit.
Manifattur: Progress Progress
Post tan-Negozju: GREENVILLE, SC, 29607 US
