Introduzzjoni
This manual provides essential instructions for the safe and effective use of your Eiko PR12 Miniature Light Bulb. Please read this manual thoroughly before installation and retain it for future reference. The Eiko PR12 is an incandescent light bulb designed for specific applications, including flashlights and automotive uses, requiring approximately 6 volts, typically supplied by 5 D-cell batteries.
Setup u Installazzjoni
Follow these steps to properly install the Eiko PR12 Miniature Light Bulb:
- Is-Sigurtà l-Ewwel: Ensure the device (e.g., flashlight) is turned off and disconnected from any power source, or that batteries are removed, before attempting to replace the bulb.
- Identifika t-Tip ta' Bozza: Confirm that your device requires a PR12 type miniature incandescent bulb with a flanged base and operates on approximately 6 volts (e.g., from 5 D-cell batteries).
- Neħħi l-Bozza Qadima: Carefully unscrew or unclip the old bulb from its socket. Dispose of old bulbs responsibly.
- Daħħal Bozza Ġdida: Align the flanged base of the Eiko PR12 bulb with the socket. Gently push and twist or secure the bulb into place until it is firmly seated. Do not overtighten.
- Funzjonalità tat-Test: Reinsert batteries or reconnect the power source and turn on the device to verify the new bulb is functioning correctly.
This image displays the Eiko PR12 Miniature Light Bulb. It features a clear glass envelope, revealing the filament inside, and a silver-colored flanged base designed for secure fitting in compatible devices.
Istruzzjonijiet Operattivi
The Eiko PR12 Miniature Light Bulb operates as a standard incandescent light source. Once properly installed in a compatible device and powered, it will emit light. Operation is typically controlled by the device's power switch.
- Power On/Off: Use the switch on your flashlight or other compatible device to turn the light bulb on or off.
- Luminożità: The bulb provides a fixed brightness of 38 lumens.
- Voltage Kompatibilità: Ensure the power source provides approximately 6 volts for optimal performance and lifespan.
Manutenzjoni
The Eiko PR12 Miniature Light Bulb requires minimal maintenance. However, following these guidelines can help ensure its longevity and performance:
- Tindif: If the glass bulb becomes dirty, gently wipe it with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or excessive moisture. Ensure the bulb is cool before cleaning.
- Immaniġġjar: Always handle the bulb by its metal base to avoid transferring oils from your skin to the glass, which can create hot spots and reduce bulb life.
- Ħażna: Store spare bulbs in a cool, dry place, protected from physical impact.
- Sostituzzjoni: The average lifetime of this bulb is 15 hours. Replace the bulb when it burns out or its light output significantly diminishes. Refer to the "Setup and Installation" section for replacement instructions.
Issolvi l-problemi
If your Eiko PR12 Miniature Light Bulb is not functioning as expected, consider the following common issues and solutions:
- Il-bozza ma tixgħelx:
- Iċċekkja Sors tal-Enerġija: Ensure batteries are correctly inserted, fully charged, or the device is properly connected to its power supply.
- Check Bulb Seating: Verify the bulb is securely seated in its socket. Remove and reinsert if necessary.
- Inspect Filament: Visually inspect the bulb's filament. If it appears broken or disconnected, the bulb has likely burned out and needs replacement.
- Ħsara fl-apparat: Test the device with a known working bulb, if available, to rule out a malfunction in the device itself (e.g., faulty switch, corroded contacts).
- Ħruġ tad-Dawl Dim:
- Qawwa Baxxa tal-Batterija: Ibdel jew iċċarġja mill-ġdid il-batteriji.
- Bulb Nearing End of Life: The bulb's brightness may decrease as it approaches its average lifetime of 15 hours. Consider replacing it.
- Dirty Bulb/Reflector: Clean the bulb and the device's reflector (if applicable) as described in the Maintenance section.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Eiko |
| Model Name / Part Number | PR12 / 40084 |
| Tip Dawl | Inkandexxenti |
| Wattage | 2.98 Watts (Nominal 3.00 Watts) |
| Voltage | 5.95 Volts (Nominal 6.00 Volts) |
| Kurrenti | 0.501 Amps |
| Daqs tal-Forma tal-Bozza | B3.5 (Also referred to as B10) |
| Bażi tal-Bozza | Single Contact Miniature Flanged (PX13.5s) |
| Luminożità | 38 Lumens |
| Ħajja Medja | 15 Sigħat |
| Materjal | Copper (base) |
| Karatteristika Speċjali | Clear Glass Bulb, Flashlight Bulb |
| Użi Speċifiċi | Automotive, Lamp, Flashlight |
| Sors tal-Enerġija | Battery Powered (e.g., 5 D-Cells) |
| UPC | 031293400840 |
Informazzjoni dwar Garanzija
Specific warranty details for the Eiko PR12 Miniature Light Bulb are not provided in this manual. For information regarding product warranty, please refer to the original product packaging or contact Eiko customer support directly.
Appoġġ għall-Klijent
For further assistance, technical support, or inquiries about the Eiko PR12 Miniature Light Bulb, please visit the official Eiko webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. L-informazzjoni ta' kuntatt tipikament tista' tinstab fuq is-sit tal-manifattur webis-sit jew l-imballaġġ tal-prodott.
