Introduzzjoni
This manual provides essential instructions for the safe and efficient use of your Dremel 7700-1/15 MultiPro 7.2-volt Cordless Rotary Tool. Please read this manual thoroughly before operating the tool and retain it for future reference.
The Dremel 7700-1/15 MultiPro 7.2-volt Cordless Rotary Tool, shown with its various accessories including sanding bands, grinding stones, polishing wheels, and a storage case.
Informazzjoni dwar is-Sigurtà
Always wear appropriate personal protective equipment, such as safety glasses, when operating the rotary tool. Ensure the workpiece is securely clamped. Keep hands and loose clothing away from rotating parts. Do not operate the tool near flammable liquids or gases.
Setup
1. Iċċarġjar tal-batterija
The Dremel 7700-1/15 features a removable 7.2V battery. To charge, detach the battery pack from the tool by squeezing the release tabs on both sides and pulling it off. Connect the battery pack to the provided charger and plug the charger into a standard wall outlet. Allow approximately 3 hours for a full charge.
2. Twaħħil tal-Aċċessorji
- Press and hold the shaft lock button located on the tool's head.
- Ħoll il-ġewż tal-kolletta.
- Insert the desired accessory shank into the collet. The tool accepts accessories up to 1/8" shank.
- Tighten the collet nut securely while still holding the shaft lock button. Release the shaft lock button.
Istruzzjonijiet Operattivi
1. Powering On/Off and Speed Selection
The Dremel 7700-1/15 has a 2-speed switch (10,000 and 20,000 RPM). Slide the switch to "LO" for 10,000 RPM or "HI" for 20,000 RPM. To turn off the tool, slide the switch to the "OFF" position.
2. Għajnuniet għall-Użu Ġenerali
- Apply light pressure when working. Let the tool's speed do the work.
- For best results, use the appropriate accessory for the task.
- The compact and lightweight design allows for easy handling and reduced fatigue during extended use.
Manutenzjoni
1. Tindif
Naddaf il-fetħiet tal-ventilazzjoni tal-għodda regolarment biex tevita li tissaħħan iżżejjed. Uża pinzell artab jew arja kkompressata biex tneħħi t-trab u l-fdalijiet. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
2. Kura tal-batterija
Store the battery in a cool, dry place. For optimal battery life, avoid fully discharging the battery before recharging. Refer to model No. 757-01 for replacement battery packs.
3. Sostituzzjoni tal-Aċċessorji
Replace worn or damaged accessories promptly to maintain performance and safety. Follow the accessory attachment instructions when replacing.
Issolvi l-problemi
- L-għodda ma tixgħelx: Ensure the battery is fully charged and properly inserted. Check the power switch position.
- Prestazzjoni mnaqqsa: The accessory may be worn, or the battery may need recharging. Ensure the correct speed setting is selected for the task.
- Vibrazzjoni eċċessiva: Check that the accessory is correctly installed and tightened in the collet. Replace any bent or damaged accessories.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Dremel |
| Numru tal-Mudell | 7700 |
| Voltage | 7.2 Volts |
| Sors tal-Enerġija | Li jaħdem bil-batterija (mingħajr fili) |
| Veloċitajiet | 2-speed (10,000 RPM, 20,000 RPM) |
| Veloċità ta' Rotazzjoni Massima | 20,000 RPM |
| Veloċità Minima | 10,000 RPM |
| Accepts Shank Size | Up to 1/8" |
| Piż tal-oġġett | 12 uqija |
| Komponenti Inklużi | Battery, Charger, 15 Accessories, Storage Bag |
| Użi Rakkomandati | Sharpening, Grinding, Engraving, Sanding, Polishing |
Informazzjoni dwar Garanzija
The Dremel 7700-1/15 MultiPro comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official Dremel websit.
Appoġġ
For technical assistance, replacement parts, or general inquiries, please contact Dremel Customer Service. Contact information can typically be found on the Dremel webis-sit jew fl-imballaġġ tal-prodott.
Visit the official Dremel Store for more information and accessories: Dremel Store
