Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.
Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Informazzjoni dwar is-Sigurtà
- Always turn off the main water supply before installing or performing maintenance on the faucet.
- Ilbes tagħmir protettiv personali xieraq, bħal nuċċalijiet tas-sigurtà, waqt l-installazzjoni.
- Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta plamer kwalifikat.
- Kun żgur li l-konnessjonijiet kollha huma sikuri biex tevita t-tnixxijiet.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Lavatory Faucet Assembly
- Ħardwer tal-Immuntar
- Matching Pop-Up Drain Assembly
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | KB3605BL |
| Tip Finish | Bronż Għorok taż-Żejt |
| Materjal | Ram |
| Tip ta 'Immuntar | Muntanja tal-gverta |
| Tip ta' Installazzjoni | Ċentru |
| Għadd ta' toqob | 3 |
| Numru ta 'Mankijiet | 2 |
| Jilħaq spout | 4 Pulzier |
| B'ħeġġeġ Għoli | 3.5 Pulzier |
| Tneħħija tal-Bżieżaq | 2 Pulzier |
| Rata massima tal-fluss | 1.8 Gallons Per Minute (6.8 Liters Per Minute) |
| Tip ta 'Skartoċċ | Dura Seal Washerless |
| Karatteristika Speċjali | Pop Up Drain Included |
Image: Dimensional drawing providing precise measurements for installation.
Setup u Installazzjoni
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Ipprepara l-Sink: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Installa l-Korp tal-Faucet: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Qabbad il-Linji tal-Provvista tal-Ilma: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Installa l-Pop-Up Drain: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Test għal Tnixxijiet: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.
Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Operazzjoni
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- Ilma kiesaħ: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Ilma sħun: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Kontroll tat-temperatura: Aġġusta l-manki tas-sħan u tal-kesħa simultanjament biex tikseb it-temperatura tal-ilma mixtieqa.
- Rata tal-fluss: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Drenaġġ Pop-Up: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Manutenzjoni
Proper care will maintain the finish and performance of your faucet:
- Tindif: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish.
- Manutenzjoni tal-Aeratur: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Prevenzjoni tat-tnixxija: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Flow Ilma Baxx | Clogged aerator; partially closed supply valves. | Clean aerator; ensure supply valves are fully open. |
| Tnixxijiet tal-Faucet mill-Bokka | Kartriġ mikul. | Ibdel l-iskartoċċ. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Kwistjonijiet tat-Temperatura tal-Ilma | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Informazzjoni dwar Garanzija
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass websit.
Appoġġ
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's webis-sit jew fuq l-imballaġġ tal-prodott.
Għal aktar informazzjoni, żur il- Kingston Brass Store.
