Manwal tal-Istruzzjonijiet tal-Bracket tal-Ħajt li Jinklina Brateck VX37L

1. Introduzzjoni

This manual provides detailed instructions for the safe and proper installation and operation of your Brateck Tilting Wall Mount Bracket, model VX37L. This mount is designed to securely hold most 36" to 63" LCD and Plasma TVs, supporting VESA standards up to 750 x 450, with a maximum weight capacity of 165 lbs. Please read this manual thoroughly before beginning installation.

2. Informazzjoni Importanti dwar is-Sigurtà

TWISSIJA: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Tinstallax dan il-prodott fuq ħitan li mhumiex strutturalment sodi. Kun żgur li l-wiċċ tal-immuntar jista' jsostni b'mod sikur il-piż ikkombinat tal-immuntar u d-displej.
• Always use a stud finder to locate wooden studs. If mounting to concrete or brick, use appropriate anchors (not always included).
• Teċċedix il-kapaċità massima tal-piż ta' 165 lbs (75 kg).
• Kun żgur li l-viti kollha huma ssikkati sew, iżda tissikkax iżżejjed.
• Żomm il-komponenti kollha 'l bogħod mit-tfal.
• Wear appropriate safety gear during installation, including eye protection.

3. Kontenut tal-Pakkett

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact your retailer for assistance.

• Assemblea tal-Pjanċa tal-Ħajt
• Dirgħajn tal-Bracket tat-TV (2)
• Mounting Hardware Kit (various screws, washers, spacers, wall anchors)
• Manwal ta' Istruzzjoni

4. Setup u Installazzjoni

4.1. Għodod Meħtieġa (Mhux Inklużi)

• Tornavit tar-ras Phillips
• Drill with appropriate drill bits (for wood studs or concrete)
• Finder Stud
• Level (built-in on mount, but an additional one is recommended)
• Tejp tal-Kejl
• Lapes

4.2. Kontrolli ta 'qabel l-installazzjoni

• Tip ta' Ħajt: Determine if your wall is wood stud, concrete, or brick. Different mounting hardware and techniques are required.
• Kompatibbiltà VESA: Check the VESA mounting pattern on the back of your TV. This mount supports VESA patterns up to 750mm (horizontal) x 450mm (vertical). Refer to the diagram below for visual reference.
• Kapaċità tal-piż: Ensure your TV's weight does not exceed 165 lbs (75 kg).

Figura 1: VESA Mounting Dimensions and Tilt Range. This diagram illustrates the minimum and maximum VESA dimensions (58mm to 750mm horizontally, 75mm to 450mm vertically) and the tilt range of 0° to -15°.

4.3. Immuntar tal-Pjanċa tal-Ħajt

1. Iddetermina l-Għoli tal-Immuntar: Decide the desired height for the center of your TV. Mark this spot on the wall.
2. Sib Studs: Use a stud finder to locate the center of at least two adjacent wooden studs. Mark their positions. The wall plate measures 32" wide, so it can span two 16" on-center studs.
3. Pożizzjoni tal-Pjanċa tal-Ħajt: Hold the wall plate against the wall, aligning its center with your marked TV center and ensuring the mounting holes align with the stud centers. Use the built-in level to ensure it is perfectly horizontal. Mark the drill points.
4. Drill Pilota Toqob: Drill pilot holes at the marked locations. For wood studs, use a drill bit slightly smaller than the lag bolts. For concrete/brick, use a masonry drill bit and insert appropriate wall anchors (if not using studs, ensure proper anchors are used).
5. Pjanċa tal-Ħajt Sikura: Attach the wall plate to the wall using the provided lag bolts and washers. Tighten securely with a wrench, but do not overtighten.

Figura 2: Quddiem view of the Brateck Tilting Wall Mount Bracket. This image displays the main wall plate with the integrated level and the two vertical TV bracket arms attached, ready for TV mounting.

4.4. Attaching TV Bracket Arms to TV

1. Agħżel il-Viti: Choose the correct diameter and length of screws that fit your TV's mounting holes. Use washers if necessary to prevent damage to the TV.
2. Waħħal l-Armi: Carefully place the TV face down on a soft, clean surface. Align the TV bracket arms with the mounting holes on the back of your TV. Ensure the arms are oriented correctly (hooks facing downwards).
3. Secure Arms: Insert the chosen screws through the bracket arms and into the TV's mounting holes. Tighten securely with a screwdriver, but do not overtighten.

Figura 3: Angolat view of the Brateck Tilting Wall Mount Bracket. This image provides a perspective view of the wall mount, highlighting the robust construction and the tilting mechanism on the TV bracket arms.

4.5. Iddendel it-TV mal-Pjattaforma tal-Ħajt

1. Lift TV: With assistance, carefully lift the TV with the attached bracket arms.
2. Hook onto Wall Plate: Align the hooks on the TV bracket arms with the top edge of the wall plate. Gently lower the TV, ensuring both arms securely engage with the wall plate.
3. TV Sikura: Locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to prevent the TV from accidentally lifting off the wall plate.

5. Operating Instructions (Tilting Feature)

The Brateck Tilting Wall Mount allows for a variable downward tilt from 0° to -15° to optimize your viewing angle and reduce glare.

1. Aġġusta tal-Mejjel: Loosen the tilt adjustment knobs located on the side of each TV bracket arm.
2. Issettja l-Angolu: Gently tilt the bottom of your TV forward or backward to achieve the desired viewangolu tal-ing.
3. Secure Tilt: Once the desired angle is set, tighten the tilt adjustment knobs firmly to lock the TV in position.

6. Manutenzjoni

• Spezzjoni regolari: Iċċekkja perjodikament il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
• Tindif: Naddaf il-muntatura b'ċarruta ratba u niexfa. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
• Kontroll tal-Ħsara: If any part of the mount appears damaged or worn, discontinue use and contact customer support.

7 Issolvi l-problemi

7.1. It-TV mhux livellat wara l-installazzjoni

Soluzzjoni: Ensure the wall plate was installed perfectly level. If not, you may need to slightly adjust the wall plate's position. Some mounts offer minor post-installation leveling adjustments on the TV bracket arms; check if your model has this feature. Always re-check all connections after adjustment.

7.2. TV feels unstable or loose

Soluzzjoni: Immediately remove the TV from the mount. Re-check all wall plate mounting screws and TV bracket arm screws for tightness. Ensure the wall structure is adequate and that the correct anchors were used. Verify the TV's weight does not exceed the mount's capacity. Ensure the safety screws/locking mechanisms are engaged.

7.3. Difficulty tilting the TV

Soluzzjoni: Ensure the tilt adjustment knobs on the TV bracket arms are sufficiently loosened before attempting to adjust the angle. If they are too tight, the mechanism will resist movement. Do not force the tilt.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ għall-Klijent

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Brateck websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

If you encounter any issues during installation or operation, please contact Brateck customer service for assistance.