Manwal tal-Istruzzjonijiet tas-Sett ta' Roti Manfrotto 104G 100mm bil-Brejkijiet

1. Introduzzjoni

This manual provides essential instructions for the safe and effective use of your Manfrotto 104G 100mm Wheel Set with Brakes. Please read this manual thoroughly before installation and operation to ensure proper functionality and longevity of the product.

2. Prodott Aktarview

The Manfrotto 104G Wheel Set is designed to add mobility to compatible cine stands, allowing for easy repositioning of lighting equipment in a studio environment. This set includes three 100mm wheels, each equipped with an individual brake mechanism for secure positioning.

Stampa 1: The Manfrotto 104G 100mm Wheel Set. Each wheel features a robust metal housing, a gray rubber wheel, and a foot-operated brake lever.

Karatteristiċi ewlenin:

• Set of 3 wheels for comprehensive stand mobility.
• Integrated brake mechanism on each wheel for secure locking.
• 100mm (3.94 inch) diameter wheels for smooth movement.
• M10 screw attachment for compatibility with various cine stands.
• Load capacity: 220.46 lbs (100 kg).

3. Setup u Installazzjoni

1. Ipprepara l-Istand: Ensure your cine stand is stable and on a flat surface. Identify the attachment points for the wheels, typically at the base of each leg.
2. Waħħal ir-roti: Each Manfrotto 104G wheel features an M10 screw attachment. Carefully thread the M10 screw of each wheel into the corresponding receptacle on your cine stand's legs.
3. Qfil Sikur: Hand-tighten each wheel securely. Do not overtighten, but ensure there is no wobble. Verify that all three wheels are firmly attached before placing any equipment on the stand.
4. Mobilità tat-Test: Once all wheels are installed, gently push the stand to confirm smooth movement and stability.

Nota: Always ensure the stand is empty or securely held when attaching or detaching wheels to prevent accidental tipping.

4. Istruzzjonijiet Operattivi

Nimxu l-Stand:

To move the cine stand, ensure all wheel brakes are disengaged. Gently push or pull the stand to the desired location. Avoid sudden, forceful movements, especially on uneven surfaces.

Engaging the Brakes:

Each wheel is equipped with a foot-operated brake lever. To engage a brake, press down firmly on the lever until it locks into place. This will prevent the wheel from rolling and swiveling.

Disengaging the Brakes:

To disengage a brake, lift the brake lever upwards until it releases. Ensure all three brakes are disengaged before attempting to move the stand.

Prekawzjoni tas-Sigurtà: Always engage all three brakes when the stand is in its desired position and supporting equipment to prevent accidental movement.

5. Manutenzjoni

• Tindif regolari: Keep the wheels and brake mechanisms free from dust, dirt, and debris. Use a soft, damp drapp għat-tindif. Evita kimiċi ħarxa.
• Spezzjona għal Ilbes: Periodically check the wheel treads for signs of wear or damage. Ensure the M10 screw attachments remain tight.
• Funzjonalità tal-Brejk: Test the brakes regularly to ensure they engage and disengage smoothly and securely.
• Ħażna: When not in use, store the wheels in a clean, dry environment.

6 Issolvi l-problemi

• Ir-roti ma jimxux bla xkiel:
  • Check for debris caught in the wheel or swivel mechanism.
  • Ensure brakes are fully disengaged.
  • Inspect for damage to the wheel or axle.
• Il-brejkijiet ma jingħaqdux/jiddiżingaġġawx:
  • Check for obstructions around the brake lever.
  • Ensure the lever mechanism is clean and free of dirt.
  • If the issue persists, contact Manfrotto support.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information or technical support regarding your Manfrotto 104G Wheel Set, please refer to the official Manfrotto website or contact Manfrotto customer service directly. Keep your purchase receipt as proof of purchase.

Manfrotto Official Websit: www.manfrotto.com