1. Istruzzjonijiet Importanti dwar is-Sigurtà
Read and understand all safety instructions before using the KTC WPD1-300 Water Pump Pliers. Failure to follow these instructions may result in injury or damage to the tool or workpiece.
- Ilbes Protezzjoni tal-Għajnejn: Always wear ANSI-approved safety goggles or safety glasses with side shields when using hand tools.
- Spezzjona l-Għodda Qabel l-Użu: Before each use, inspect the pliers for any signs of damage, wear, or loose parts. Do not use damaged tools.
- Use the Correct Tool for the Job: These pliers are designed for gripping, holding, and turning objects. Do not use them as a hammer, pry bar, or for cutting wires unless specifically designed for that purpose.
- Żomm Qabda Sikura: Ensure a firm and stable grip on both the pliers and the workpiece to prevent slipping.
- Evita li tissikka żżejjed: Do not apply excessive force that could damage the workpiece or the pliers.
- Żomm Idejn Ċar: Always keep hands and fingers away from the jaw area during adjustment and operation.
- Aħżen sew: Store pliers in a dry, clean place, out of reach of children.
2. Prodott Aktarview
The KTC WPD1-300 is a robust water pump pliers designed for versatile gripping tasks. Its adjustable jaw mechanism allows for a wide range of applications, from plumbing to general mechanical work. The ergonomic vinyl handles provide a comfortable and secure grip.
Stampa 2.1: KTC WPD1-300 Water Pump Pliers. This image displays the full length of the pliers, highlighting the adjustable jaw, pivot point, and red vinyl-coated handles.
Karatteristiċi ewlenin:
- Ftuħ Massimu: 2.0 inches (50 mm) for handling various sizes of pipes and fasteners.
- Tul Totali: 12.1 inches (307 mm) providing ample leverage.
- Livelli ta' Aġġustament: 6 distinct adjustment positions for precise jaw sizing.
- Materjal tal-manku: Durable vinyl for enhanced grip and comfort.
3. Setup
The KTC WPD1-300 Water Pump Pliers are ready for use out of the package. No assembly is required.
- Ippakkja: Oħroġ il-pliers bir-reqqa mill-ippakkjar tagħhom.
- Spezzjoni Inizjali: Perform a quick visual inspection for any shipping damage or manufacturing defects. Ensure the jaws open and close smoothly and the adjustment mechanism operates freely.
- Tindif (Mhux obbligatorju): If desired, wipe down the pliers with a clean, dry cloth to remove any manufacturing residues.
4. Istruzzjonijiet Operattivi
Follow these steps for effective and safe operation of your KTC WPD1-300 Water Pump Pliers.
- Select Jaw Opening:
- Hold the pliers firmly in one hand.
- Locate the pivot point where the two halves of the pliers connect.
- Slide the upper jaw along the pivot mechanism to adjust the opening. The WPD1-300 offers 6 adjustment levels.
- Position the jaws so they are slightly wider than the object you intend to grip.
- Position on Workpiece: Place the jaws around the object, ensuring a secure and even contact on both sides.
- Applika Pressjoni: Squeeze the handles together to firmly grip the workpiece. The serrated jaws are designed to provide maximum grip.
- Perform Task: Once a secure grip is established, you can turn, hold, or manipulate the object as needed.
- Rilaxx: Loosen your grip on the handles to release the workpiece.
Nota: Always ensure the jaws are properly seated on the workpiece to prevent slipping, which can cause damage or injury.
5. Manutenzjoni
Proper maintenance will extend the life and performance of your KTC WPD1-300 Water Pump Pliers.
- Tindif: After each use, wipe down the pliers with a clean, dry cloth to remove dirt, grease, or moisture. For stubborn grime, a mild solvent can be used, followed by thorough drying.
- Lubrikazzjoni: Periodically apply a small amount of light machine oil to the pivot points and adjustment mechanism to ensure smooth operation and prevent rust. Wipe off any excess oil.
- Ħażna: Aħżen il-pliers f'ambjent niexef biex tevita l-korrużjoni. Evita li taħżinhom f'ambjent niexef.amp jew kundizzjonijiet umdi.
- Spezzjoni: Regularly inspect the jaws for wear or damage. If the serrations are significantly worn, the gripping effectiveness may be reduced.
6 Issolvi l-problemi
Hawn huma xi kwistjonijiet komuni u s-soluzzjonijiet potenzjali tagħhom:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Jaws slip on workpiece | Incorrect jaw adjustment; worn jaws; greasy workpiece. | Adjust jaws to fit snugly; clean workpiece; replace pliers if jaws are excessively worn. |
| Difficulty adjusting jaws | Dirt or debris in mechanism; lack of lubrication. | Clean the pivot mechanism; apply light machine oil. |
| Formazzjoni tas-sadid | Espożizzjoni għall-umdità; ħażna mhux xierqa. | Clean off rust with a wire brush and oil; store in a dry environment. |
7. Speċifikazzjonijiet
Technical specifications for the KTC WPD1-300 Water Pump Pliers:
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | WPD1300 |
| Numru tal-Parti | WPD1300 |
| Brand | Estensjoni KTC |
| Tul Totali | 12.1 pulzieri (307 mm) |
| Ftuħ massimu tax-xedaq | 2.0 pulzieri (50 mm) |
| Adjustment Levels | 6 |
| Piż tal-oġġett | 1.52 libbra (690 gramma) |
| Dimensjonijiet tal-Pakkett | 14.41 x 3.94 x 1.1 pulzieri |
| Kulur | Aħmar |
| Materjal tal-Korp | High-grade Steel Alloy |
| Materjal tal-manku | Vinil |
Stampa 7.1: KTC WPD1-300 Water Pump Pliers with dimensions. This image illustrates the total length of the pliers, indicating approximately 13 inches (32 cm).
8. Garanzija u Appoġġ
KTC products are manufactured to high standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official KTC website. For technical support or service inquiries, please contact KTC customer service through their official channels.
Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.
