1. Introduzzjoni
Thank you for choosing the Progress Lighting P8072-28 Recessed Trim. This incandescent open splay recessed trim features a white powdercoat finish and is designed for use with insulated ceilings. It has a 7-3/4 inch outside diameter and is intended for use with compatible Progress 6-inch recessed lighting housings (P87, P187, P83, P88, P82). Please read these instructions carefully before installation and use to ensure proper function and safety.
Figura 1.1: Quddiem view of the P8072-28 Recessed Trim with an incandescent bulb installed.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this trim with non-compatible recessed housings. Compatibility is specified for Progress 6-inch recessed housings (P87, P187, P83, P88, P82).
- Refer to the housing's specifications for maximum wattage. This trim is rated for up to 250 watts at 120 volts.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
- M'għandekx timmodifika l-prodott bl-ebda mod.
3. Lista tal-Komponenti
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- P8072-28 Recessed Trim (1 unit)
- Product and Installation Sheet (this document)
Note: Recessed housing and incandescent bulb are sold separately.
4. Setup u Installazzjoni
This trim is designed for easy installation into compatible 6-inch recessed housings. The trim mounts to the can with a 2-inch by 7-inch leaf spring mechanism, which pulls the trim tightly to the ceiling.
- Itfi l-Enerġija: Before starting, ensure the power to the circuit is turned off at the circuit breaker or fuse box.
- Ipprepara l-Akkomodazzjoni: Ensure the recessed housing (e.g., P87, P187) is properly installed in the ceiling according to its own instruction manual.
- Waħħal is-Sokit: Il-lamp socket from the recessed housing attaches directly to the trim. This eliminates the need for an adjustable socket mount within the housing. Secure the socket to the designated attachment point on the trim.
- Installa Bozza: Screw the appropriate incandescent bulb (up to 250W) into the socket.
- Insert Trim: Carefully push the trim assembly, with the bulb and socket attached, into the recessed housing opening. The leaf springs on the trim will compress and then expand to firmly hold the trim against the ceiling. Apply firm, even pressure until the trim is flush with the ceiling surface.
- Irrestawra l-Enerġija: Once the trim is securely in place, restore power at the circuit breaker or fuse box and test the light.
Figura 4.1: Minn fuq għal isfel view of the P8072-28 Recessed Trim, illustrating the open splay design.
Figure 4.2: Dimensions of the P8072-28 Recessed Trim, showing a 7-3/4 inch outside diameter.
5. Istruzzjonijiet Operattivi
The P8072-28 Recessed Trim operates in conjunction with your installed recessed housing and a compatible incandescent bulb. Operation is controlled via a standard wall switch connected to the lighting circuit.
- Tiżgura l-wat korretttage bulb (up to 250W) is installed.
- Uża s-swiċċ tal-ħajt biex tixgħel jew titfi l-apparat tad-dawl.
6. Manutenzjoni
The P8072-28 Recessed Trim requires minimal maintenance.
- Tindif: To clean the trim, ensure power is off. Wipe with a soft, dry or slightly damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-finitura.
- Sostituzzjoni tal-bozza: Turn off power at the circuit breaker. Carefully pull the trim down from the ceiling to access the bulb. Unscrew the old bulb and screw in a new one of the correct type and wattage. Reinsert the trim firmly into the housing.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | L-ebda qawwa għall-apparat. Il-bozza hija maħlula jew maħruqa. Wajers mhux korretti. | Iċċekkja circuit breaker/fjus. Issikka jew ibdel il-bozza. Ikkonsulta elettriċista kwalifikat biex jiċċekkja l-wajers. |
| Trim does not sit flush with ceiling. | Improper installation of leaf springs. Housing not properly installed. | Ensure leaf springs are fully engaged. Verify housing installation according to its manual. |
| Teptip ħafif. | Bozza maħlula. Swiċċ tad-dimmer inkompatibbli. Ħruġ tal-wajers. | Issikka l-bozza. Ensure dimmer is compatible with incandescent lights. Ikkonsulta elettriċista kwalifikat. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | P8072-28 |
| Brand | Progress Progress |
| Tip | Recessed Trim (Open Splay) |
| Kulur | Abjad |
| Materjal | Aluminju |
| Dijametru ta' Barra | 7-3/4 pulzieri (19.69 ċm) |
| Dimensjonijiet tal-Prodott (L x W x H) | 7.75" x 7.75" x 4.75" (19.69 ċm x 19.69 ċm x 12.07 ċm) |
| Piż tal-oġġett | 5.9 uqija (167 gramma) |
| Voltage | 120 Volts |
| Max Wattage | 250 Watts (Inkandexxenti) |
| Sors tal-Enerġija | Corded Elettriku |
| Użu fuq ġewwa/barra | Ġewwa |
| Djar Kompatibbli | Progress 6-inch recessed housings (P87, P187, P83, P88, P82) |
| UPC | 785247807222 |
9. Informazzjoni dwar Garanzija
This Progress Lighting P8072-28 Recessed Trim comes with a Garanzija limitata ta 'sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification. For warranty claims, please retain your proof of purchase and contact Progress Lighting customer support.
10. Appoġġ u Kuntatt
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Progress Lighting customer support. Visit the official Progress Lighting webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.
Progress Lighting Official Websit: Visit the Progress Lighting Store on Amazon
