Progress Lighting P5607-09 Outdoor Wall Lantern Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P5607-09 Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P5607-09 Outdoor Wall Lantern. This image displays the complete fixture, featuring a brushed nickel finish, clear flat glass panels, and a single exposed bulb.

Informazzjoni Importanti dwar is-Sigurtà

TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-kaxxa tal-fjużijiet jew mis-circuit breaker qabel l-installazzjoni jew is-servizz. Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċess tal-installazzjoni.

• Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC).
• Use UL or ETL listed wire connectors suitable for the size, type, and number of conductors.
• Do not install this fixture in wet locations unless specifically rated for such use. This fixture is rated for outdoor use.
• Kun żgur li l-apparat ikun immuntat sew ma' element strutturali.
• Taqbiżx il-wat massimutage speċifikat għall-bozza.
• Dejjem immaniġġja l-komponenti tal-ħġieġ b'attenzjoni.

Kontenut tal-Pakkett

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Outdoor Wall Lantern Fixture (Model P5607-09)
• Ħardwer tal-Immuntar (viti, ġewż tal-wajer, pjanċa tal-immuntar)
• Folja ta 'Installazzjoni
• Clear Flat Glass Panels

Image: Line drawing of the P5607-09 fixture, showing its basic outline and internal components. This diagram helps identify the model number and general structure.

Speċifikazzjonijiet

Installazzjoni u Tqegħid

This fixture is designed for outdoor wall mounting. Refer to the included "Installation Sheet" for detailed step-by-step wiring and mounting instructions. Always ensure power is disconnected at the circuit breaker before beginning any electrical work.

Fixture Sizing and Placement Guidelines

Proper sizing and placement are crucial for optimal aesthetic and functional lighting. Consider the following guidelines:

Dawl tad-Dħul

• Għoli tal-Muntaġġ: Select fixtures that measure 1/4 to 1/3 of the door's height.
• Għoli tal-Immuntar: Mount the center of the fixture at eye level, approximately 5.5 to 6 feet from the ground.
• Spazjar: For double doors or wider entryways, mount lights on either side, 8 to 10 feet apart.

Image: A diagram illustrating how to size wall lanterns for an entryway. It shows a door and a wall lantern, with text indicating that wall lanterns should measure 1/4 the height of the door. An example is provided: a 96-inch door requires a 24-inch fixture height.

Image: An architectural drawing of a house front, demonstrating the recommended placement of two 24-inch tall wall lanterns flanking a 96-inch tall front door. This visually reinforces the 1/4 door height rule for fixture sizing.

Garage Lighting

• Single Car Garage: Use a single wall lantern to illuminate.
• Two or More Car Garages: Mount lights on either side of the garage doors, or across the top of the doors for even illumination.

Image: An architectural drawing of a house with a garage, illustrating the placement of two 24-inch tall wall lanterns flanking a 16-foot wide garage door. The text indicates that for a 16-foot door, a 24-inch height for each fixture is appropriate, following the 0.25 multiplier rule.

Operazzjoni

Once properly installed and wired, your P5607-09 Outdoor Wall Lantern operates like any standard outdoor light fixture. It can be controlled by a wall switch, dimmer switch (if using dimmable bulbs), or an external timer/photocell system (not included) connected to the circuit.

• Żgura t-tip ta 'bozza korretta u wattage (up to 100W incandescent, medium base) are used.
• For optimal performance and energy efficiency, consider using LED bulbs compatible with outdoor fixtures.

Manutenzjoni

Tindif

• Dejjem skonnettja l-enerġija qabel it-tindif.
• Biex tnaddaf l-apparat, imsaħ b'ċarruta ratba u damp drapp.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Għall-pannelli tal-ħġieġ, jista' jintuża tindif tal-ħġieġ ħafif, applikat l-ewwel fuq drapp, mhux direttament fuq l-apparat.

Sostituzzjoni tal-Bozza

• Ensure the power is turned off and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb and screw in a new medium base (E26) bulb, not exceeding 100 watts.
• Ensure the glass panels are securely re-installed after bulb replacement.

Issolvi l-problemi

Garanzija u Appoġġ

This Progress Lighting fixture comes with a Garanzija Limitata ta' sena. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For warranty claims or technical assistance, please contact Progress Lighting customer service.

For additional product information or support, visit the Progress Lighting Store.

Riżorsi Addizzjonali

Vetrina tal-Prodott