1. Introduzzjoni
This user manual provides essential information for the safe and effective use of your Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb. This high-performance lamp is designed for various applications requiring bright, white light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Informazzjoni dwar is-Sigurtà
WARNING: Halogen bulbs operate at high temperatures and can cause burns or fire if not handled properly. Always allow the bulb to cool completely before handling.
- Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves when handling.
- Ensure the power supply is disconnected before installing, removing, or cleaning the bulb.
- Use only in fixtures rated for the bulb's wattage u voltage (600W, 120V).
- Do not use if the glass envelope is scratched or cracked.
- Żomm 'il bogħod minn materjali li jaqbdu.
- Armi l-bozoz użati skont ir-regolamenti lokali.
3. Prodott Aktarview
The Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb is a high-quality lamp featuring a robust tungsten filament designed to produce a brighter, whiter light. Its T-4 shape and R7s base make it suitable for specific lighting fixtures.
4. Speċifikazzjonijiet
| Speċifikazzjoni | Valur |
|---|---|
| Brand | Eiko |
| Numru tal-Mudell | FCB |
| Tip Dawl | Aloġenu |
| Wattage | 600 watt |
| Voltage | 120 Volts |
| Daqs tal-Forma tal-Bozza | T4 |
| Tip ta' Bażi | R7s |
| Temperatura tal-Kulur | 3200 Kelvin |
| Kulur Dawl | Abjad Bright |
| Materjal | Tungstenu |
| Dimensjonijiet tal-Prodott | 1 x 1 x 2.7 pulzieri |
| Piż tal-oġġett | 0.353 uqija |
| UPC | 031293031006 |
5. Setup / Installation
Follow these steps to safely install your Eiko FCB halogen bulb:
- Kun żgur li l-Enerġija hija Mitfija: Before beginning, turn off the power to the fixture at the circuit breaker or fuse box. Verify that the fixture is completely de-energized.
- Ħalli tkessiħ: If replacing an existing bulb, allow the old bulb to cool down completely before touching it.
- Ilbes Ingwanti: Handle the new bulb with a clean, lint-free cloth or gloves. Avoid touching the glass envelope directly with bare hands.
- Neħħi l-Bozza l-Qadima (jekk applikabbli): Carefully remove the old R7s base bulb from its spring-loaded socket. Gently push one end into the socket and pull the other end out.
- Daħħal Bozza Ġdida: Align the R7s pins of the new bulb with the corresponding slots in the fixture's socket. Gently push one end of the bulb into its socket, then compress the spring-loaded mechanism to allow the other end to slide into place. Ensure both ends are securely seated.
- Irrestawra l-Enerġija: Ladarba l-bozza tkun installata sew, erġa' daħħal l-enerġija fl-apparat tad-dawl.
- Test: Ixgħel is-swiċċ tad-dawl biex tikkonferma li qed jaħdem sew.
6. Istruzzjonijiet Operattivi
The Eiko FCB halogen bulb operates immediately upon receiving power. Simply turn on the light switch connected to the fixture to illuminate the bulb. There are no special operating procedures beyond standard electrical safety practices.
- Ensure the fixture's switch is in the 'OFF' position before connecting power.
- Turn the switch to 'ON' to activate the bulb.
- For optimal bulb life, avoid frequent on/off cycling.
7. Manutenzjoni
Proper maintenance can extend the life and performance of your halogen bulb:
- Tindif: If the bulb's glass becomes dirty or smudged, turn off the power and allow the bulb to cool completely. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
- Sostituzzjoni: Halogen bulbs dim over time. For best performance, consider replacing bulbs when their light output noticeably decreases. Always replace with a bulb of the same wattage u voltage (FCB 120V 600W T-4 R7s Base).
- Spezzjoni: Spezzjona l-bozza u l-apparat tad-dawl perjodikament għal kwalunkwe sinjal ta’ ħsara jew xedd.
8 Issolvi l-problemi
If you encounter issues with your Eiko FCB halogen bulb, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-bozza ma tixgħelx | Ebda setgħa li twaħħil Bozza mhux imqiegħda sew Il-bozza tinħaraq Faulty fixture or switch | Iċċekkja s-salvavita/fjus Ensure bulb is fully inserted Ibdel il-bozza Ikkonsulta elettriċista |
| Teptip tal-bozza | Konnessjoni maħlula Incorrect dimmer switch (if applicable) Voltagvarjazzjonijiet | Turn off power and re-seat bulb Ensure dimmer is compatible with halogen Ikkonsulta elettriċista |
| Il-bozza tinħaraq malajr | Frequent handling of glass Vol-żejjedtage Vibrazzjoni eċċessiva Ventilazzjoni fqira fl-apparat | Handle with gloves/cloth Ivverifika l-volum tal-attrezzaturatage Ensure stable mounting Check fixture for proper airflow |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja elettriċista kwalifikat jew l-appoġġ tal-manifattur.
9. Garanzija u Appoġġ
Eiko products are manufactured to high standards and are designed for reliable performance. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Eiko webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Eiko Customer Support: Jekk jogħġbok żur www.eiko.com għal informazzjoni ta' kuntatt u aktar assistenza.
