RIDGID 26192 4-Piece Pipe Threader Dies Set Instruction Manual

1. Prodott Aktarview

The RIDGID 26192 4-Piece Pipe Threader Dies Set is engineered for precision pipe threading. This set includes high-speed NPT dies designed specifically for seamless integration and optimal performance with the RIDGID Model 1224 Threading Machine. Crafted from durable high-speed steel, these dies ensure clean and accurate threads for various applications.

• High-Speed Steel Construction: Provides exceptional durability and extended service life for professional threading tasks.
• NPT Thread Compatibility: Specifically designed for National Pipe Taper (NPT) threads, suitable for plumbing and gas systems.
• Applikazzjoni versatili: Capable of threading diverse pipe materials including black, galvanized, plastic-coated stainless steel, IMC, heavy-duty wall conduit, and rod up to 30 Rockwell C hardness.
• Sett Tlesti: Includes four dies, ensuring consistent threading performance when all dies are replaced simultaneously.

2. Informazzjoni dwar is-Sigurtà

Always prioritize safety when operating power tools and handling sharp components. Failure to follow safety guidelines can result in serious injury.

• Read Manuals: Always read and understand the instruction manual for the RIDGID Model 1224 Threading Machine before operating.
• Protezzjoni tal-għajnejn: Wear ANSI-approved safety glasses or goggles to protect against flying debris.
• Protezzjoni tal-Idejn: Wear appropriate work gloves to protect hands from sharp edges and hot surfaces.
• Żona tax-Xogħol: Kun żgur li ż-żona tax-xogħol tiegħek hija nadifa, imdawwal sew, u ħielsa minn ostakli.
• Biċċa tax-Xogħol Sikura: Always properly secure the pipe in the threading machine's vise to prevent rotation during operation.
• Skonnettja l-Enerġija: Disconnect power to the threading machine before performing any maintenance, adjustments, or die changes.

3. Setup u Installazzjoni

Proper installation of the dies is crucial for achieving accurate threads and ensuring the longevity of your equipment. These dies are specifically designed for the RIDGID Model 1224 Threading Machine.

3.1. Installing the Dies

1. Ensure the RIDGID Model 1224 Threading Machine is powered off and unplugged.
2. Open the die head of the threading machine.
3. Carefully remove any old or worn dies.
4. Insert the four new RIDGID 26192 dies into their respective slots in the die head. It is recommended to replace all four dies simultaneously to maintain consistent threading performance.
5. Ensure each die is seated correctly and securely in its slot.
6. Close the die head and ensure it is properly latched.

4. Istruzzjonijiet Operattivi

Follow these steps for effective and safe pipe threading using the RIDGID 26192 dies with your Model 1224 Threading Machine.

4.1. Preparing the Pipe

1. Cut the pipe to the desired length, ensuring the cut is square and burr-free.
2. Ream the inside of the pipe to remove any internal burrs that could obstruct flow or damage the dies.
3. Sikur clamp the pipe in the threading machine's vise. Ensure the pipe is level and stable.

4.2. Threading Process

1. Position the die head against the end of the pipe.
2. Engage the threading machine. The integral through-head system will continuously flood the threading area with lubrication. This is critical for cooling the dies, reducing friction, and clearing chips, which ensures a smooth operation and extends die life.
3. Allow the machine to cut the threads to the appropriate length and taper for NPT (National Pipe Taper) threads. The dies are designed to cut both tapered and straight threads, including NPT/NPSM and BSPT/BSPP.
4. Once threading is complete, disengage the machine and carefully retract the die head.
5. Inspect the newly cut threads for quality and consistency.

5. Manutenzjoni

Regular maintenance of your RIDGID 26192 dies will ensure optimal performance and extend their lifespan.

• Tindif: After each use, clean the dies thoroughly to remove metal chips, debris, and old cutting oil. Use a stiff brush and appropriate cleaning solution.
• Lubrikazzjoni: Ensure the die head's lubrication system is functioning correctly and that adequate cutting oil is used during operation.
• Spezzjoni: Periodically inspect the cutting edges of the dies for wear, chipping, or damage. Worn dies will produce poor quality threads and should be replaced.
• Ħażna: Store the dies in a clean, dry environment to prevent rust and corrosion. The original packaging or a dedicated tool case is ideal.

6 Issolvi l-problemi

If you encounter issues while threading, consider the following common problems and solutions:

For issues related to the threading machine itself, consult the RIDGID Model 1224 Threading Machine's instruction manual.

7. Speċifikazzjonijiet

• Numru tal-Mudell: 26192
• Is-sett jinkludi: 4-Piece Pipe Threader Dies
• Compatible Machine: RIDGID Model 1224 Threading Machine
• Pipe Capacity: 2-1/2 inches to 4 inches
• Tip ta' Thread: National Pipe Taper (NPT), also capable of NPT/NPSM and BSPT/BSPP
• Konsenja: Leminija
• Materjal: Azzar b'Veloċità Għolja
• Piż tal-oġġett: Madwar 2 liri
• Dimensjonijiet tal-Prodott: Madwar 3.11 x 3.11 x 2.2 pulzieri
• Kulur: Fidda

8. Garanzija

RIDGID stands behind the quality of its products. The 26192 4-Piece Pipe Threader Dies Set is covered by a Full Lifetime Warranty.

Deskrizzjoni tal-garanzija: Should your tool ever malfunction from defects in workmanship or materials, RIDGID will repair or replace the tool free of charge.

9. Appoġġ

For further assistance, technical support, or to inquire about replacement parts, please contact RIDGID customer service or visit their official websit.

• RIDGID Official Websit: www.ridgid.com
• RIDGID Store on Amazon: Visit the RIDGID Store