Manwal ta' Istruzzjoni għad-Dawl Fluworexxenti taħt il-Kabinett Westek FA413HB ta' 12.5 Pulzieri

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Westek FA413HB 12.5-inch Fluorescent Under Cabinet Light. Please read these instructions thoroughly before installation and retain this manual for future reference.

Informazzjoni dwar is-Sigurtà

• TWISSIJA: Biex tevita xokk elettriku, kun żgur li l-enerġija tkun mitfija mis-circuit breaker jew mill-kaxxa tal-fjużijiet qabel l-installazzjoni jew is-servizz.
• Dan il-prodott huwa maħsub għall-użu fuq ġewwa biss.
• Tinstallax ħdejn sorsi ta' sħana jew f'post fejn ma tiddix.amp postijiet.
• Ensure all electrical connections are made in accordance with local codes and ordinances. If you are unsure, consult a qualified electrician.
• Tippruvax timmodifika l-apparat. Kwalunkwe modifika tista' tħassar il-garanzija u toħloq periklu għas-sigurtà.
• Handle fluorescent bulbs with care. If a bulb breaks, ventilate the area and clean up broken glass and mercury according to local regulations.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Westek FA413HB 12.5-inch Fluorescent Under Cabinet Light Fixture
• 8-watt T5 Fluorescent Bulb (pre-installed or separate)
• Power Cord (for plug-in installation)
• Ħardwer tal-Immuntar (viti)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Speċifikazzjonijiet

Setup u Installazzjoni

The Westek FA413HB fixture offers both plug-in and direct-wire installation options. Always ensure power is disconnected before starting installation.

1. Immuntar tal-Apparat

1. Determine the desired location for the light fixture under your cabinet. Ensure there is sufficient space and a power outlet nearby for plug-in installation, or access to electrical wiring for direct-wire.
2. Using the provided mounting hardware (screws), secure the fixture to the underside of the cabinet. The fixture is designed with a slim 1-inch profile to hide behind most cabinet lips.

Image: Westek FA413HB 12.5-inch under cabinet light fixture, showing its slim design, integrated on/off switch, and included accessories like wire nuts and a conduit connector for installation.

2. Connecting Power (Plug-in Option)

1. Once the fixture is securely mounted, connect the provided power cord to the fixture.
2. Plug the power cord into a standard 120V AC wall outlet.
3. Kun żgur li l-korda tkun imdaħħla b'mod sikur u ma toħloqx periklu ta' tfixkil jew tinqata'.

3. Connecting Power (Direct-Wire Option)

This fixture can be converted for direct-wire installation. It is highly recommended that direct-wire installation be performed by a qualified electrician to ensure safety and compliance with electrical codes.

1. Itfi l-enerġija fis-circuit breaker.
2. Remove the cover plate from the fixture to access the wiring compartment.
3. Connect the household electrical wires to the fixture's wires (typically black to black, white to white, and ground to ground) using appropriate wire connectors (wire nuts, often included).
4. Secure the wiring and replace the cover plate.
5. Irrestawra l-enerġija fis-circuit breaker.

Istruzzjonijiet Operattivi

The Westek FA413HB features an integrated on/off switch for easy operation.

• Biex tixgħel id-dawl ON, press the switch located on the fixture.
• Biex tixgħel id-dawl OFF, press the switch again.
• The electronic ballast provides instant-on, flicker-free, and quiet operation.

Manutenzjoni

Sostituzzjoni tal-Bozza

The fixture uses an 8-watt T5 fluorescent bulb. To replace the bulb:

1. IMPORTANTI: Disconnect power to the fixture at the circuit breaker or by unplugging it before attempting to replace the bulb.
2. Carefully remove the clear lens cover by gently prying it off.
3. Gently twist the old T5 fluorescent bulb to release it from its sockets and remove it.
4. Insert the new 8-watt T5 fluorescent bulb into the sockets, ensuring it is properly seated.
5. Replace the clear lens cover, ensuring it snaps securely into place.
6. Irrestawra l-enerġija għall-apparat.

Tindif

To clean the fixture, ensure power is disconnected. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.

Issolvi l-problemi

Garanzija u Appoġġ

Westek products are designed for quality and reliability. For warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Westek website. Please have your model number (FA413HB) and purchase date available when contacting support.

Għal aktar informazzjoni, żur il- Westek Store.