Winco Digital Timer TIM-85D Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the setup, operation, and maintenance of your Winco Digital Timer, model TIM-85D. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Figura 1: Quddiem view of the Winco Digital Timer TIM-85D, showing the display, HOUR, MIN, START/STOP, and RESET buttons.

Setup

1. Installazzjoni tal-batterija

1. Sib il-kompartiment tal-batterija fuq wara tat-tajmer.
2. Iftaħ l-għatu tal-kompartiment tal-batterija.
3. Insert one AAA battery (not included), ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

2. L-Ewwel Tixgħil

The timer should automatically power on once the battery is correctly installed. The display will show '00:00'.

Figure 2: The Winco Digital Timer TIM-85D shown in hand, illustrating its compact dimensions of approximately 3.25 x 2.38 x 0.75 inches.

Istruzzjonijiet Operattivi

1. Setting the Timer (Countdown)

1. Agħfas il- SIEGĦA button to set the desired hours. Each press increases the hour by one. Hold to rapidly advance.
2. Agħfas il- MIN button to set the desired minutes. Each press increases the minute by one. Hold to rapidly advance.
3. To clear the set time, press the RESET buttuna.

2. Tibda u Twaqqif tat-Tajmer

1. After setting the desired time, press the BIDU/WAQQF buttuna biex tibda l-countdown.
2. Biex twaqqaf il-countdown, agħfas il-buttuna BIDU/WAQQF button again. The display will flash.
3. Biex tkompli, agħfas BIDU/WAQQF għal darba oħra.
4. When the countdown reaches zero, an alarm will sound. Press any button to silence the alarm.

3. Count-Up Function (Stopwatch)

1. Ensure the timer display is at '00:00' (press RESET jekk meħtieġ).
2. Agħfas il- BIDU/WAQQF button. The timer will begin counting up from '00:00'.
3. To pause the count-up, press BIDU/WAQQF.
4. To reset the count-up timer to '00:00', press RESET filwaqt li waqfa qasira.

4. Alarm and Silence Switch

The Winco Digital Timer features an audible alarm. Some models may include a silence switch, typically located on the side or back, to disable the alarm sound. Refer to your specific unit for this feature.

5. Additional Functions (Refer to Video)

The following video demonstrates various functions of a similar digital timer, including setting time, count-up/down, 1/100 second count, day count, and clock display. While the visual appearance of the timer in the video may differ from the Winco TIM-85D, the operational principles for these functions are generally applicable.

Manutenzjoni

1. Tindif

Imsaħ it-tajmer b'artab, damp drapp. Tużax tindif li joborxu jew tgħaddas l-apparat fl-ilma.

2. Sostituzzjoni tal-batterija

When the display dims or the timer functions erratically, replace the AAA battery. Follow the battery installation steps outlined in the Setup section.

Issolvi l-problemi

• It-tajmer mhux qed jixgħel: Ensure the battery is correctly installed with proper polarity and is not depleted. Replace the battery if necessary.
• Id-displej huwa mudlam jew vojt: Ibdel il-batterija.
• L-allarm ma ħossx: Check if your model has a silence switch and ensure it is in the 'on' or 'audible' position. Ensure the volume is not set to minimum if adjustable.
• Buttuni ma jirrispondux: Remove and reinsert the battery to perform a soft reset. If the issue persists, the unit may require service.

Speċifikazzjonijiet

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

Winco products are designed for durability and performance. For specific warranty details, please refer to the packaging or contact Winco customer service. Keep your purchase receipt as proof of purchase.

Appoġġ għall-Klijent

For further assistance, technical support, or to inquire about replacement parts, please contact Winco customer service. Contact information can typically be found on the product packaging or the official Winco websit.