Leviton Extreme 6+ QuickPort CAT 6 Connector Instruction Manual

1. Introduzzjoni

The Leviton Extreme 6+ QuickPort Connector is engineered for reliable Category 6 network performance. Designed for use with all Leviton QuickPort compatible products, this connector features patented Retention Force Technology (RFT) for consistent performance and unique pair separation towers for simplified and efficient terminations. Its 180-degree configuration allows for convenient rear termination.

Image 1.1: Leviton Extreme 6+ QuickPort CAT 6 Connectors (Model 61110-BY6) in a 25-pack, with a close-up of a single yellow connector.

2. Karatteristiċi tal-prodott

• High-Impact, Fire-Retardant Body: Connector body constructed from UL 94V-2 rated plastic for durability and safety.
• TIA/EIA Channel Performance: Meets or exceeds channel and component-level performance requirements for TIA/EIA Category 6, ensuring optimal network speed and reliability.
• Color-Coding Options: Available in 14 colors for easy network organization and identification.
• Kompatibilità Universali: Features standard QuickPort compatibility for integration with various Leviton QuickPort products.
• Universal Color-Coded Wiring Labels: Includes clear labels for T568A and T568B wiring schemes, simplifying termination.
• Retention Force Technology (RFT): Patented technology ensures consistent contact and long-term performance.
• Pair Separation Towers: Unique design facilitates quicker and easier wire terminations.
• 180-Degree Configuration: Punch field located at the rear for straightforward termination.

3. Kontenut tal-Pakkett

Each package of Leviton Extreme 6+ QuickPort CAT 6 Connectors (Model 61110-BY6) contains:

• 25 x Leviton Extreme 6+ QuickPort CAT 6 Connectors (Model 61110-BY6)

4. Speċifikazzjonijiet

5. Setup u Installazzjoni

Proper installation of the Extreme 6+ QuickPort Connector is crucial for optimal network performance. Always ensure safety precautions are followed, including disconnecting power to any active network equipment before beginning installation.

5.1 Għodod Meħtieġa

• Impact Punch-Down Tool (110-type)
• Strippers/Cutters tal-Wajer
• CAT 6 Ethernet Cable
• Leviton QuickPort Wall Plate or Patch Panel (sold separately)

5.2 Passi ta' Installazzjoni

1. Ipprepara l-Cable: Carefully strip approximately 1 inch (2.5 cm) of the outer jacket from the CAT 6 cable, exposing the four twisted pairs. Be careful not to nick the insulation of the individual wires.
2. Untwist and Arrange Wires: Untwist the wire pairs and arrange them according to the T568A or T568B wiring scheme indicated on the connector's color-coded label. Ensure consistency in wiring scheme across all connections in your network.
3. Place Wires in Pair Separation Towers: Utilize the unique pair separation towers to guide each wire into its corresponding slot on the connector. This helps maintain proper twist rates close to the termination point, which is essential for CAT 6 performance.
4. Punch Down Wires: Using a 110-type impact punch-down tool, firmly punch each wire into its respective IDC (Insulation Displacement Connector) slot. The tool should simultaneously seat the wire and trim any excess. Ensure a secure connection for each wire.
5. Inspect Termination: Visually inspect all connections to ensure wires are properly seated and trimmed. There should be no exposed copper beyond the IDC slot.
6. Mount the Connector: Snap the terminated QuickPort connector into a compatible Leviton QuickPort wall plate or patch panel. Ensure it clicks securely into place.
7. Konnessjoni tat-Test: After installation, use a network cable tester to verify continuity and proper wiring of the installed connection.

Image 5.1: Illustrates the process of punching down a CAT 6 cable into a Leviton QuickPort connector using an impact tool.

Image 5.2: Shows multiple Leviton QuickPort connectors installed in a patch panel, connected with red patch cables.

6. Istruzzjonijiet Operattivi

Once the Leviton Extreme 6+ QuickPort Connector is properly installed in a wall plate or patch panel, its operation is straightforward:

1. Connect Patch Cable: Insert a standard RJ45 Ethernet patch cable into the front port of the QuickPort connector. Ensure it clicks firmly into place, indicating a secure connection.
2. Qabbad mal-Apparat: Connect the other end of the RJ45 patch cable to your network device (e.g., computer, printer, network switch, router).
3. Ivverifika l-Konnessjoni: Check the network status indicators on your device or network equipment to confirm a successful connection.

The connector is designed for passive data transmission and does not require any active configuration or power.

7. Manutenzjoni

The Leviton Extreme 6+ QuickPort Connector is designed for long-term, maintenance-free operation. However, periodic inspection and basic care can help ensure continued performance:

• Żomm Nadif: Ensure the RJ45 port is free from dust and debris. Use compressed air if necessary to clear any obstructions.
• Spezzjona għal Ħsara: Periodically check the connector for any visible signs of physical damage, such as cracks, bent pins, or loose connections.
• Evita Forza Eċċessiva: When inserting or removing patch cables, avoid using excessive force to prevent damage to the connector or cable.
• Kundizzjonijiet Ambjentali: Ensure the connector is used within appropriate environmental conditions (temperature, humidity) as specified for network cabling components.

8 Issolvi l-problemi

If you experience issues with your network connection, consider the following troubleshooting steps:

8.1 L-ebda Konnessjoni man-Netwerk

• Iċċekkja l-Konnessjonijiet tal-Cable: Ensure all RJ45 patch cables are securely seated in both the QuickPort connector and the connected device.
• Ivverifika l-Wiring: If you performed the termination, double-check the wiring scheme (T568A or T568B) on both ends of the cable run using the color-coded labels. Inconsistent wiring will prevent a connection.
• Test Cables: Use a network cable tester to verify the integrity of the patch cables and the installed cable run. This can identify breaks or miswires.
• Spezzjona l-Konnettur: Carefully remove the connector from the wall plate/patch panel and inspect the punch-down terminations for any loose or improperly seated wires. Re-punch if necessary.
• Try Another Port/Connector: If possible, test with a different QuickPort connector or a different port on your network equipment to isolate the issue.

8.2 Veloċità baxxa tan-Netwerk

• Kwalità tal-Kejbil: Ensure you are using high-quality CAT 6 rated patch cables.
• Tul tal-Cable: Adhere to TIA/EIA channel performance limits, which typically restrict the total length of patching and equipment cords to 32 feet (10 meters) for optimal CAT 6 performance.
• Re-terminate: If previous steps do not resolve the issue, consider re-terminating the connector, paying close attention to maintaining wire twists as close to the IDC as possible.
• Tagħmir tan-Netwerk: Ensure your network switch, router, and device network adapters are all capable of CAT 6 speeds.

9. Garanzija u Appoġġ

For information regarding product warranty, technical support, or additional resources, please refer to the official Leviton website or contact Leviton customer service. As the manufacturer, Leviton Direct provides comprehensive support for their products.

Tista 'żżur il- Ħanut Leviton fuq Amazon għal aktar informazzjoni dwar il-prodott u għażliet ta' appoġġ.