Acctim Smartlite Grande Alarm Clock Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the setup, operation, and maintenance of your Acctim Smartlite Grande Alarm Clock, Model 13422X. Please read this manual thoroughly before using the product to ensure correct operation and to maximize its lifespan.

Figura 1: Quddiem view of the Acctim Smartlite Grande Alarm Clock, displaying its analog dial, time hands, and brand logo.

2. Informazzjoni dwar is-Sigurtà

• Sigurtà tal-batterija: Use only the specified battery type (not included). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity (+/-). Remove exhausted batteries promptly. Do not dispose of batteries in fire.
• Pjazzament: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity or extreme temperatures.
• Tindif: Clean the clock with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Żarmar: Tippruvax tiżżarma jew issewwi l-arloġġ int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti:

• Acctim Smartlite Grande Alarm Clock (1 unit)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Nota: Il-batteriji mhumiex inklużi u jridu jinxtraw separatament.

4. Karatteristiċi tal-prodott

• Smartlite Technology: An innovative feature that automatically illuminates the clock dial for easy viewing in low-light conditions. A built-in light sensor detects ambient light levels, turning the illumination off during daytime to conserve battery life.
• Funzjoni ta' allarm: Integrated alarm with an on/off switch.
• Non-Ticking Sweep Movement: The second hand moves in a continuous, smooth motion, designed to reduce audible ticking sounds.
• Display Analog: Clear and easy-to-read analog dial.
• Li jaħdem bil-batterija: Operates on batteries for portability and convenience.

5. Setup

5.1. Installazzjoni tal-batterija

1. Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-arloġġ.
2. Remove the cover by sliding or lifting it according to the markings.
3. Insert the required batteries (check the compartment for battery type) ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Ibdel l-għatu tal-kompartiment tal-batterija b'mod sikur.

5.2. Issettjar tal-Ħin Inizjali

1. Sib il-pum tal-issettjar tal-ħin fuq wara tal-arloġġ.
2. Rotate the knob in either direction to set the current time. Ensure the hour and minute hands are accurately positioned.

6. Istruzzjonijiet Operattivi

6.1. Issettjar tal-Allarm

1. Sib il-pum tal-issettjar tal-allarm fuq wara tal-arloġġ.
2. Rotate the alarm setting knob to move the alarm hand to your desired alarm time.
3. Locate the alarm ON/OFF switch (usually a small slider or button) on the back or side of the clock.
4. Slide the switch to the "ON" position to activate the alarm.

6.2. It-Tnaqqis tal-Allarm

When the alarm sounds, you can silence it by:

• Pressing the snooze/light button (if available, typically on top). This will temporarily silence the alarm, and it will sound again after a few minutes.
• Sliding the alarm ON/OFF switch to the "OFF" position. This will deactivate the alarm until it is manually turned "ON" again.

6.3. Smartlite Function

The Smartlite feature operates automatically. The built-in light sensor will detect low ambient light conditions and illuminate the clock dial. During brighter conditions, the illumination will turn off to conserve battery power. No manual adjustment is required for this feature.

7. Manutenzjoni

7.1. Tindif

Wipe the clock's exterior with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.

7.2. Sostituzzjoni tal-batterija

When the clock's display dims, the alarm weakens, or the clock stops functioning, it is time to replace the batteries. Follow the battery installation steps in Section 5.1.

8 Issolvi l-problemi

• Clock not working / Display dim:
  • Iċċekkja jekk il-batteriji humiex imdaħħla sew bil-polarità t-tajba.
  • Ibdel b'batteriji friski.
• L-allarm ma ħossx:
  • Ensure the alarm ON/OFF switch is in the "ON" position.
  • Iċċekkja li l-ħin tal-allarm huwa ssettjat b'mod korrett.
  • Ibdel il-batteriji jekk ikunu baxxi.
• Smartlite not illuminating:
  • Ensure the clock is in a sufficiently dark environment for the sensor to activate.
  • Ibdel il-batteriji jekk ikunu baxxi.
• Unusual noise from the clock:
  • While the clock features a non-ticking sweep movement, some subtle mechanical sounds may be audible in very quiet environments. This is generally normal for analog movements.
  • Ensure the clock is on a stable, flat surface to prevent vibrations.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Acctim websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

For further assistance, please contact your retailer or the manufacturer's customer service department.