Adcraft 11.4 Quart Soup Kettle Warmer

Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your Adcraft 11.4 Quart Soup Kettle Warmer, Model SK-500W. Please read all instructions thoroughly before using the appliance to ensure proper function and to prevent injury or damage.

Istruzzjonijiet Importanti dwar is-Sigurtà

• Aqra l-istruzzjonijiet kollha qabel l-użu.
• Tmissx uċuħ sħan. Uża manki jew pumi.
• Biex tipproteġi kontra xokk elettriku, tgħaddasx il-korda, il-plakek, jew il-korp tal-apparat fl-ilma jew f'likwidu ieħor.
• Superviżjoni mill-qrib hija meħtieġa meta xi apparat jintuża minn jew ħdejn it-tfal.
• Spluggja mill-iżbokk meta ma tkunx qed tuża u qabel tnaddaf. Ħallih jiksaħ qabel ma tpoġġi jew tneħħi l-partijiet, u qabel tnaddaf l-apparat.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact qualified service personnel for examination, repair, or adjustment.
• L-użu ta' aċċessorji aċċessorji mhux rakkomandati mill-manifattur tal-apparat jista' jikkawża korrimenti.
• Tużax barra.
• Tħallix il-korda tistrieħ fuq it-tarf tal-mejda jew tal-bank, jew tmiss uċuħ sħan.
• Tpoġġix fuq jew ħdejn burner tal-gass sħun jew elettriku, jew f'forn imsaħħan.
• Għandha tintuża kawtela kbira meta tiċċaqlaq apparat li jkun fih żejt jaħraq jew likwidi oħra jaħarqu.
• Dejjem waħħal il-plagg mal-apparat l-ewwel, imbagħad daħħal il-korda fis-sokit tal-ħajt. Biex tiskonnettja, itfi kwalunkwe kontroll, imbagħad neħħi l-plagg mis-sokit tal-ħajt.
• Tużax l-apparat għal użu ieħor minbarra dak maħsub.
• Dan l-apparat huwa għal użu kummerċjali biss.
• TWISSIJA: Dan il-prodott jista’ jesponik għal kimiċi inkluż iċ-Ċomb, li huwa magħruf mill-Istat ta’ Kalifornja li jikkawża kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni mur fuq www.P65Warnings.ca.gov.

X'hemm fil-Kaxxa

Meta tiftaħ il-pakkett, kun żgur li l-komponenti kollha huma preżenti u bla ħsara:

• Adcraft Soup Kettle Warmer Base
• Stainless Steel Insert (11.4 Quart)
• Slotted Stainless Steel Lid with Hinge

Setup Istruzzjonijiet

1. Ippakkja: Carefully remove all packaging materials from the soup kettle. Retain packaging for future storage or transport if needed.
2. Spezzjona: Check the appliance for any signs of damage. Do not operate if damaged.
3. Tindif Inizjali: Before first use, wash the stainless steel insert and lid with warm, soapy water. Rinse thoroughly and dry completely. Wipe the exterior of the kettle base with a damp drapp.
4. Pjazzament: Place the soup kettle on a stable, level, heat-resistant surface. Ensure there is adequate ventilation around the unit and that it is not near flammable materials or water sources.
5. Arma: Place the clean stainless steel insert into the kettle base.

Image: The Adcraft 11.4 Quart Soup Kettle Warmer, showing its black exterior, stainless steel insert, and hinged lid. The power cord and temperature control knob are visible on the side.

Istruzzjonijiet Operattivi

1. Imla l-Banju tal-Ilma: Pour approximately 0.6 to 0.8 liters (20 to 27 fluid ounces) of water into the kettle base, surrounding the stainless steel insert. Do not overfill; the water level should be below the rim of the insert. This water bath helps to evenly distribute heat and prevent scorching.
2. Żid l-Ikel: Place your pre-heated soup, stew, chili, or sauce into the stainless steel insert. The kettle is designed to keep food warm, not to cook it from cold.
3. Għatu Sikur: Place the slotted stainless steel lid onto the insert. The hinged design allows for easy access and serving.
4. Qabbad l-Enerġija: Ensure the temperature control knob is set to the "OFF" position. Plug the power cord into a grounded 120V AC electrical outlet.
5. Issettjat Temperatura: Turn the temperature control knob clockwise to the desired setting. The temperature can be adjusted from 80°F (27°C) to 200°F (93°C). A red indicator light will illuminate, indicating the unit is heating.
6. Ħin tat-tisħin: Allow approximately 20-30 minutes for the water bath and food to reach the set temperature.
7. Isservi: Use the hinged lid for convenient serving. Always use appropriate serving utensils.
8. Wara l-Użu: Turn the temperature control knob to the "OFF" position and unplug the unit from the wall outlet. Allow the kettle to cool completely before cleaning.

Manutenzjoni u Tindif

Regular cleaning ensures optimal performance and extends the life of your soup kettle warmer.

1. Skonnettja l-Enerġija: Dejjem aqla l-unità u ħalliha tiksaħ kompletament qabel tnaddaf.
2. Neħħi l-Komponenti: Carefully remove the stainless steel insert and lid.
3. Clean Insert and Lid: Wash the stainless steel insert and lid with warm, soapy water. Use a non-abrasive sponge or cloth. Rinse thoroughly and dry completely to prevent water spots or mineral buildup. These parts are generally dishwasher safe, but hand washing is recommended for longevity.
4. Barra Nadif: Wipe the exterior of the kettle base with a damp cloth. For stubborn stains, use a mild, non-abrasive cleaner. Do not immerse the base in water or spray water directly onto it.
5. Clean Water Bath Area: Periodically clean the interior of the kettle base where the water bath sits to remove any mineral deposits. Use a descaling solution if necessary, following the product's instructions, then rinse thoroughly with a damp drapp.
6. Ħażna: Ensure all parts are dry before reassembling or storing the unit. Store in a cool, dry place.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ għall-Klijent

For warranty information, technical assistance, or to inquire about replacement parts, please contact Adcraft customer support. Refer to your purchase documentation or the Adcraft official websit għad-dettalji ta' kuntatt attwali.

Adcraft Websit: www.adcraft.com