Manwal tal-Utent tat-Trepied tal-Aluminju Manfrotto 190XB bi 3 Sezzjonijiet

Introduzzjoni

The Manfrotto 190XB is a robust and versatile 3-section aluminum tripod designed for photographers requiring stability and flexibility. This model features a redesigned aluminum frame, offering a balance of durability and portability. Its ergonomic design includes improved leg-angle release mechanisms and quick-action leg locks, facilitating rapid setup and adjustment. The tension of the leg locking mechanism is user-adjustable, allowing for personalized control. This tripod is engineered to provide reliable support for various photographic applications.

Setup

1. Żpakkjar u Spezzjoni Inizjali: Carefully remove the tripod from its packaging. Inspect all components for any signs of damage. Ensure all leg sections, locks, and the center column are intact and functioning correctly.
2. Attaching a Tripod Head: The Manfrotto 190XB does not include a tripod head. To attach a compatible head, locate the 3/8-inch screw on the top plate of the tripod's center column. Align the base of your tripod head with this screw and rotate the head clockwise until it is securely fastened. Ensure it is tightened firmly to prevent movement during use.
3. Deploying the Legs: Release the quick-action leg locks on each leg. Extend each leg section to the desired length. Press the leg-angle release mechanism near the top of each leg to adjust the spread angle. The tripod offers preset leg angles of 25, 46, 66, and 88 degrees for various stability requirements and terrain types. Once the desired length and angle are set, firmly close all quick-action leg locks.
4. Extending the Center Column: To increase the tripod's height, unlock the center column collar located at the top of the tripod chassis. Gently pull the center column upwards to extend it. Once the desired height is reached, tighten the collar securely to lock the center column in place.

Istruzzjonijiet Operattivi

• Aġġustament tal-Angoli tas-Saqajn: Each leg features a mechanism to set its angle independently. Press the leg-angle release button and move the leg to one of the four preset positions (25°, 46°, 66°, 88°). This allows for stable positioning on uneven ground or for achieving low-angle shots.
• Using Quick-Action Leg Locks: The tripod's quick-action leg locks allow for rapid extension and retraction of the leg sections. To unlock, flip the lever open. To lock, press the lever firmly until it clicks into place. Ensure all locks are fully engaged before placing equipment on the tripod.
• Center Column Operation: The rapid center column can be quickly raised or lowered. Loosen the locking collar, adjust the column to the desired height, and then firmly tighten the collar. For maximum stability, keep the center column as low as possible.
• Kapaċità tat-Tagħbija: The Manfrotto 190XB is designed to support equipment up to 11 pounds (approximately 5 kg). Do not exceed this weight limit to ensure stability and prevent damage to the tripod or your equipment.
• Balancing on Uneven Surfaces: Utilize the independent leg angle adjustments to adapt the tripod to challenging terrain. By setting each leg to a different spread angle, you can maintain the tripod's center of gravity and ensure a level platform for your camera.

Manutenzjoni

• Tindif: Wara l-użu, speċjalment f'ambjenti bit-trab, bir-ramel, jew imxarrbin, imsaħ it-tripod b'ċarruta ratba u nadifa.amp cloth. Avoid using harsh chemicals or abrasive materials. Ensure all leg sections and locking mechanisms are free of debris.
• Lubrikazzjoni: Periodically check the movement of the leg sections and center column. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the sliding surfaces. Avoid over-lubrication.
• Adjusting Leg Lock Tension: The tension of the quick-action leg locks can be adjusted. If a lock feels too loose or too tight, use an appropriate tool (e.g., an Allen key, if provided or specified by Manfrotto) to adjust the screw located on the side of the lock mechanism. Adjust incrementally until the desired tension is achieved.
• Ħażna: Store the tripod in a clean, dry place, preferably in a protective bag, to prevent dust accumulation and potential damage.

Issolvi l-problemi

• Instabbiltà tat-Tripod:
  • Ensure all leg sections are fully extended and their quick-action locks are securely closed.
  • Verify that the leg-angle release mechanisms are properly engaged at one of the preset angles.
  • Check that the center column locking collar is tightened.
  • Ensure the attached tripod head and camera are within the 11-pound load capacity.
• Leg Sections Not Extending/Retracting Smoothly:
  • Check for dirt or debris inside the leg sections or around the quick-action locks. Clean as described in the Maintenance section.
  • Applika ammont żgħir ta' lubrikant tas-silikon jekk meħtieġ.
• Leg Locks Not Holding:
  • The tension of the quick-action leg locks may need adjustment. Refer to the Maintenance section for instructions on adjusting leg lock tension.
  • Ensure the levers are fully closed and engaged.

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

The Manfrotto 190XB 3 Section Aluminum Tripod comes with a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the official Manfrotto warranty policy available on their websit.

Appoġġ

For further assistance, technical support, or to inquire about spare parts, please visit the official Manfrotto webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Tista' ssib informazzjoni ta' kuntatt u riżorsi addizzjonali fuq il- Manfrotto Store.