Dickson TM320 Temperature and Humidity Data Logger

1. Introduzzjoni

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Wirja Jumbo: Clear and easy-to-read real-time measurements.
• Faċli biex tużah: Intuitive interface for straightforward operation.

2. Informazzjoni dwar is-Sigurtà

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Uża biss is-sorsi tal-enerġija u l-aċċessorji speċifikati.
• Tippruvax tiftaħ jew issewwi l-apparat int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Dickson TM320 Data Logger
• Manwal ta 'Istruzzjoni (dan id-dokument)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Prodott Aktarview

Figura 4.1: Quddiem View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Figura 4.2: Ġenb View mal-Portijiet. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Figura 4.3: Lura View. Displays the battery compartment cover and keyhole slots for wall mounting.

Figura 4.4: Fuq View. Shows the slot for inserting an SD card for data storage and transfer.

5. Setup

5.1. Installazzjoni tal-batterija

1. Sib il-kompartiment tal-batterija fuq wara tal-apparat (ara l-Figura 4.3).
2. Żerżaq l-għatu tal-batterija miftuħ.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Agħlaq l-għatu tal-batterija sew.

5.2. L-Ewwel Tixgħil

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Immuntar tal-Apparat

The TM320 can be placed on a flat surface or mounted on a wall:

• Tqegħid tal-wiċċ: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Immuntar tal-ħajt: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Operazzjoni

6.1. Nifhmu d-Displej

The jumbo display provides real-time information:

• Qari kurrenti: Shows the live temperature or humidity value.
• Unitajiet: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Indikatur tal-batterija: Juri l-ħajja tal-batterija li fadal.
• CH (Kanal): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Funzjonijiet tal-buttuna

• Buttuna MIN/MAX: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• Buttuna ALLARM: Agħfas biex view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• Buttuna SAVE: Press to manually save a data point.

6.3. Logging tad-Data

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Issettjar ta 'Allarmi

The device features audio/visual alarms for out-of-range conditions.

1. Agħfas u żomm il- ALLARM button until the alarm setting mode is activated.
2. Uża l- MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. Uża l- SAVE button to adjust the alarm threshold values.
4. Agħfas ALLARM għal darb'oħra biex tikkonferma u toħroġ mill-modalità tas-settings.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website for software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Manutenzjoni

7.1. Tindif

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Sostituzzjoni tal-batterija

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. Ħażna

When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Websit: www.dicksonlogger.com