Introduzzjoni
The Heath Zenith SL-6167-C is a wireless door chime kit designed for convenient installation and use. This kit includes a plug-in chime receiver and a battery-operated push button, offering a reliable transmission range of up to 100 feet. Users can select between an 8-note Westminster melody or a standard 2-note melody, with adjustable volume control to suit various preferences.
Informazzjoni dwar is-Sigurtà
- Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-installazzjoni u t-tħaddim.
- Do not expose the chime receiver to moisture or extreme temperatures. For indoor use only.
- Ensure the push button is installed in a location protected from direct heavy rain to prolong its lifespan.
- Żomm il-batteriji fejn ma jintlaħqux mit-tfal. Armi l-batteriji użati b'mod responsabbli skont ir-regolamenti lokali.
- Do not attempt to open or repair the units yourself. Refer all servicing to qualified personnel.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:
- 1 x Plug-in Chime Receiver
- 1 x Wireless Push Button (with 12V battery included)
- Mounting Hardware (screws, double-sided tape)
An image showing the white plug-in chime receiver on the left and two white wireless push buttons on the right. The chime receiver has horizontal speaker grilles at the top.
Setup
1. Installazzjoni tal-Buttuna tal-Ippressar
- The wireless push button comes with a 12V battery pre-installed.
- Select a suitable mounting location near your door. Ensure the surface is clean and dry.
- Mount the push button using the provided screws or the double-sided adhesive tape. If using screws, pre-drill pilot holes if necessary.
2. Chime Receiver Setup
- Plug the chime receiver into any standard indoor 120V AC wall socket.
- For optimal signal reception, choose a central location within your home, away from large metal objects or other electronic devices that may cause interference.
3. Synchronization (Pairing)
The chime receiver and push button are typically pre-synchronized at the factory. To test, press the push button. If the chime sounds, the units are synchronized. If not, refer to the troubleshooting section for re-synchronization steps.
Istruzzjonijiet Operattivi
Aġġusta tal-Volum
Locate the volume control on the side or front of the chime receiver. Rotate or slide this control to increase or decrease the sound level to your desired volume.
Changing Chime Melody
The chime offers an 8-note Westminster melody and a 2-note melody. Refer to the chime unit for a dedicated button or switch to cycle through the available melody options.
Manutenzjoni
Push Button Battery Replacement
When the push button stops functioning or its transmission range significantly decreases, it is time to replace the battery. Open the push button casing, carefully remove the old 12V battery, and insert a new one, ensuring correct polarity (+/-). Close the casing b'mod sigur.
Tindif
Clean the chime receiver and push button with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ma jinstema' l-ebda qniepen meta tiġi ppressata l-buttuna. | Chime receiver not powered. Push button battery is dead or low. Units are out of range or obstructed. Units are not synchronized. | Ensure chime receiver is securely plugged into a working electrical outlet. Replace the 12V battery in the push button. Reposition the chime receiver or push button to reduce distance or obstructions. Ensure they are within 100 feet. Perform re-synchronization: Unplug receiver, remove push button battery. Reinsert push button battery, then plug in receiver. Press push button immediately. |
| Reduced transmission range. | Ostakli (ħitan ħoxnin, oġġetti tal-metall). Low push button battery. | Try repositioning the chime receiver or push button to minimize obstructions. Replace the 12V battery in the push button. |
Speċifikazzjonijiet
- Numru tal-Mudell: SL-6167-C
- Piż tal-oġġett: 8.1 uqija
- Dimensjonijiet tal-Prodott: 10.24 x 6.5 x 11.82 pulzieri
- Power Source (Chime): 120V AC Plug-in
- Power Source (Push Button): Batterija waħda ta' 1V (inkluża)
- Kulur: Abjad
- Materjal: Polikarbonat
- Medda ta' Trażmissjoni: Sa 100 pied (linja tal-vista)
- Melodiji: 8-note Westminster, 2-note melody
Garanzija
This Heath Zenith product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please retain your proof of purchase.
Appoġġ
For further assistance, technical support, or to inquire about replacement parts, please contact Heath Zenith customer service. Refer to the product packaging or the manufacturer's websit għal informazzjoni ta' kuntatt attwali.
