Manwal tal-Utent tat-Toshiba D-RW2 DVD Player/Recorder

1. Introduzzjoni

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Toshiba D-RW2 DVD Player/Recorder. This device is designed for both playing DVD movies and recording television programming or home video footage directly to disc.

2. Karatteristiċi ewlenin

• Single-disc DVD player/recorder with timer and one-touch recording capabilities.
• Records onto DVD-R/RW discs.
• Plays various media formats including CD-R/RW, VCD, MP3, WMA, and JPEG files.
• Features a JPEG Viewer for creating slideshows from digital photos stored on disc.
• Includes Digital Picture Zoom for magnifying specific areas of video from a DVD.
• Equipped with Dolby Digital and DTS decoding for enhanced audio.
• Offers coaxial digital audio output for connecting to surround sound systems.
• Supports 3D virtual surround sound from two speakers.
• Progressive scan output for improved video quality.

3. Gwida ta' Setup

3.1 Spakkjar u Tqegħid

Carefully remove the Toshiba D-RW2 from its packaging. Place the unit on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.

3.2 Konnessjoni mal-Enerġija

Connect the power cord to the AC inlet on the rear of the unit, then plug the other end into a standard 120V AC wall outlet.

3.3 Audio/Video Connections

The Toshiba D-RW2 offers multiple connection options for audio and video output. Choose the connection type that best suits your television or audio receiver.

• Composite A/V: Connect the yellow (video), white (left audio), and red (right audio) RCA cables from the D-RW2's "LINE OUT" jacks to the corresponding input jacks on your TV or receiver. The unit also has 2 composite A/V inputs (1 front, 1 rear) for connecting external devices.
• Vidjo S: For improved video quality over composite, connect an S-Video cable from the D-RW2's S-Video output to your TV's S-Video input. You will still need to connect separate audio cables (white and red RCA) for sound. The unit also has 2 S-Video inputs (1 front, 1 rear).
• Component Video (Y/Pb/Pr): For the highest analog video quality, connect component video cables (green, blue, red) from the D-RW2's "COMPONENT VIDEO OUT" jacks to your TV's component video input. Separate audio cables (white and red RCA) are required for sound.
• RF: Connect an RF coaxial cable from the D-RW2's RF output to your TV's antenna/cable input. The unit also has 1 RF input.
• Awdjo Diġitali: For digital surround sound, connect a coaxial digital audio cable from the D-RW2's "DIGITAL OUT (COAXIAL)" jack to a compatible digital audio input on your A/V receiver.

Immaġni: Front panel of the Toshiba D-RW2 DVD Player/Recorder, showing the disc tray, display, and control buttons.

Immaġni: Angolat view of the Toshiba D-RW2 DVD Player/Recorder, highlighting the rear panel with various audio and video input/output ports.

4. Istruzzjonijiet Operattivi

4.1 Daqq Bażiku

1. Turn on the D-RW2 and your television. Select the correct input source on your TV.
2. Agħfas il- FTUĦ/MAGĦLUQ buttuna biex tiftaħ it-trej tad-diska.
3. Poġġi DVD jew CD fuq it-trej tad-diska bin-naħa tat-tikketta tħares 'il fuq.
4. Agħfas il- FTUĦ/MAGĦLUQ button again to close the tray. The disc will load automatically.
5. Playback will usually begin automatically. If not, press the PLAY buttuna.

4.2 Ir-reġistrazzjoni

The D-RW2 allows recording onto DVD-R and DVD-RW discs. Ensure a blank or rewritable disc is inserted.

• Reġistrazzjoni One-Touch: With a source connected to an input (e.g., TV tuner, VCR), press the REC button on the front panel or remote control to start recording. Press STOP biex tispiċċa r-reġistrazzjoni.
• Reġistrazzjoni bit-tajmer: Use the timer function to schedule recordings of TV programs. Refer to the on-screen menu for detailed timer setup instructions.
• Modi ta' Reġistrazzjoni: The unit offers six compression modes, allowing recording times from 1 hour to 10 hours on a single disc. Note that higher compression (longer recording times) may result in lower video quality.
• Finalizzazzjoni: After recording, DVD-R discs must be finalized to be playable on other DVD players. DVD-RW discs may not require finalization for playback on compatible devices, but it is recommended for broader compatibility.

4.3 JPEG Viewer

Insert a disc containing JPEG image files. The unit will automatically detect the image files and allow you to view them or create custom slideshows using the remote control.

5. Kompatibilità tal-Midja

The Toshiba D-RW2 supports the following media types:

• Daqq: DVD-Video, DVD-R, DVD-RW, CD-Audio, CD-R, CD-RW, VCD, MP3, WMA, JPEG.
• Reġistrazzjoni: DVD-R, DVD-RW.

6. Advanced Audio and Video Features

• Skan Progressiv: Enhances video quality by displaying all lines of an image simultaneously, reducing flicker and improving clarity, especially on compatible televisions.
• 3:2 Pulldown Detection and Reversal: Optimizes playback of film-based content by removing redundant frames introduced during conversion to video, ensuring a more accurate and smooth picture.
• 24-bit/192 kHz PCM Audio Processor: Delivers high-fidelity audio by accurately converting digital signals from DVDs and CDs into a warmer, more natural sound.
• Dolby Digital/DTS Decoding: Provides immersive surround sound experiences when connected to a compatible audio system.
• 3D Virtual Surround Sound: Creates a simulated surround sound effect using only two speakers.

7. Speċifikazzjonijiet

8. Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-unità. Tużax prodotti tat-tindif likwidi jew aerosol.
• Kura tad-Diska: Immaniġġja d-diski mit-truf tagħhom. Żomm id-diski nodfa u ħielsa mill-grif. Aħżen id-diski fil-kaxxi tagħhom meta ma tkunx qed tużahom.
• Ventilazzjoni: Ensure the unit has proper ventilation to prevent overheating. Do not block ventilation slots.

9 Issolvi l-problemi

If you experience issues with your D-RW2, try the following common solutions:

• Ebda Qawwa: Check that the power cord is securely plugged into both the unit and a working electrical outlet.
• Ebda Stampa/Ħoss: Verify all A/V cables are correctly connected to the appropriate input/output jacks on both the D-RW2 and your TV/receiver. Ensure your TV is set to the correct input source.
• Id-Diska Mhux Qed Tilgħab: Check that the disc is clean and free of scratches. Ensure the disc type is compatible with the player (refer to Section 5).
• Kwistjonijiet ta' Reġistrazzjoni: Confirm a recordable DVD-R or DVD-RW disc is inserted. Check input source connection and recording settings. Ensure the disc is not full or protected.

For further assistance, please refer to the full operating instructions or contact Toshiba customer support.

10. X'hemm fil-Kaxxa

Your Toshiba D-RW2 package includes:

• Toshiba D-RW2 DVD Player/Recorder Unit
• Kontroll mill-bogħod (bil-batteriji)
• Printed Operating Instructions (this manual)

11. Informazzjoni Importanti dwar is-Sigurtà

CONSUMER ALERT:

This television receiver has only an analog broadcast tuner and will require a converter box after February 17, 2009 to receive over-the-air broadcasts with an antenna because of the U.S.'s transition to digital broadcasting. Analog-only TVs should continue to work as before with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products. For more information, call the Federal Communications Commission at 1-888-225-5322 (TTY: 1-888-835-5322), or visit the commission's digital-television Web sit fuq: www.dtv.gov.

12. Garanzija u Appoġġ

For warranty information, please refer to the separate warranty card included with your product or visit the official Toshiba support website. For technical support or service inquiries, please contact Toshiba customer service.