1. Introduzzjoni
This manual provides essential information for the safe and effective use of your Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp. Please read these instructions carefully before installation and operation to ensure proper function and longevity of the product.
2. Informazzjoni dwar is-Sigurtà
Aloġenu lamps operate at high temperatures and contain pressurized gas. Improper handling or use can result in personal injury or property damage. Adhere to the following safety guidelines:
- Dejjem skonnettja l-provvista tal-enerġija lill-apparat qabel ma tinstalla, tneħħi, jew tnaddaf l-apparat.amp.
- Ħalli l-lamp to cool completely before handling to prevent burns.
- Avoid touching the glass envelope of the lamp with bare hands. Oils from skin can create hot spots, leading to premature failure. Use a clean cloth or gloves during handling.
- Taqbiżx il-vol speċifikattage u wattage for your fixture.
- Tiżgura l-lamp is securely seated in its base before applying power.
- Armi l użataamps according to local environmental regulations.
3. Setup u Installazzjoni
Follow these steps for proper installation of the Eiko EYB halogen lamp:
- Skonnettjar tal-Enerġija: Ensure the power supply to the fixture is completely turned off and locked out if possible.
- Tkessiħ: Jekk tissostitwixxi l eżistentiamp, allow it to cool down for at least 15 minutes to prevent burns.
- Old Lamp Removal (if applicable): Aqbad bir-reqqa l-l qadimamp and pull it straight out from the G5.3 base. Avoid twisting if the base is a push-in type.
- L-ġdidaamp Immaniġġjar: Handle the new Eiko EYB lamp by its ceramic base. Do not touch the glass bulb with bare hands. If the glass is accidentally touched, clean it thoroughly with rubbing alcohol and a lint-free cloth before installation.
- Inserzjoni: Align the two pins of the Eiko EYB lamp with the holes in the G5.3 base. Gently push the lamp straight into the base until it is fully seated. Do not force the lamp.
- Rikonnessjoni tal-Enerġija: Ladarba l-lamp is securely installed, restore power to the fixture.
A close-up view of the Eiko EYB halogen lamp, showing its clear glass envelope, coiled tungsten filament, and the white ceramic G5.3 base with two metal pins. The base is labeled with 'EIKO EYB 82V 360W CHINA'.
4. Istruzzjonijiet Operattivi
The Eiko EYB halogen lamp is designed for straightforward operation within compatible fixtures.
- Power On/Off: Activate the fixture's power switch to turn the lamp mixgħul jew mitfi.
- Dimming (jekk applikabbli): Dan lamp is dimmable. If your fixture is equipped with a compatible dimmer switch, you can adjust the light output. Ensure the dimmer is rated for halogen lamps and the total wattage of the installed lamps.
5. Manutenzjoni
Regular maintenance helps ensure optimal performance and longevity of your Eiko EYB halogen lamp.
- Tindif: Jekk il-lamp's glass envelope becomes dusty or dirty, disconnect power and allow it to cool. Gently wipe the glass with a clean, dry, lint-free cloth. For stubborn marks, use a small amount of rubbing alcohol.
- Spezzjoni: Spezzjona perjodikament il-lamp for any signs of damage or discoloration. If the lamp appears dim or flickers, it may be nearing the end of its lifespan.
- Sostituzzjoni: Ibdel il-lamp when it fails or when its light output significantly diminishes. Always replace with a lamp tal-istess volumtage u wattage (Eiko EYB 82V 360W) to ensure compatibility and safety.
6 Issolvi l-problemi
If you encounter issues with your Eiko EYB halogen lamp, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lamp ma jixgħelx | No power to fixture, loose connection, faulty lamp, faulty fixture | Check power supply, ensure lamp is fully seated, replace lamp, inspect fixture wiring |
| Lamp huwa dim | Lamp nearing end of life, incorrect voltage, dirty glass | Ibdel lamp, verify fixture voltage, clean lamp ħġieġ |
| Lamp fails prematurely | Vol-żejjedtage, improper handling (fingerprints), excessive vibration, faulty fixture | Ivverifika l-volum tal-attrezzaturatage, handle with gloves, ensure stable mounting, inspect fixture |
If problems persist after attempting these solutions, consult a qualified electrician or the fixture manufacturer.
7. Speċifikazzjonijiet
Key technical specifications for the Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp:
- Ditta: Eiko
- Mudell: EYB
- Voltage: 82 Volts
- Wattage: 360 Watts
- Tip ta' Dawl: Aloġenu
- Daqs tal-forma tal-bozza: T3-1/2
- Bażi tal-bozza: G5.3
- Kulur ħafif: Abjad Bright
- Temperatura tal-Kulur: 3300 Kelvin
- Luminożità: 10000 Lumens
- Materjal: Tungstenu
- Dimensjonijiet tal-Prodott: 1 x 1 x 2.7 pulzieri
- Piż tal-oġġett: 1.6 uqija
- Karatteristika Speċjali: Dimmable
8. Informazzjoni dwar Garanzija
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official Eiko website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.
9. Appoġġ u Informazzjoni ta 'Kuntatt
For technical assistance, product inquiries, or further support, please contact Eiko customer service.
- Manifattur: Eiko
- Websit: Refer to Eiko's official websit għad-dettalji ta' kuntatt attwali.
- Servizz tal-Klijent: Refer to Eiko's official websit għad-dettalji ta' kuntatt attwali.
