Viper 479V Responder Remote Instruction Manual

1. Prodott Aktarview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Karatteristiċi ewlenin:

• Komunikazzjoni f'żewġ direzzjonijiet: Provides visual and audible confirmation when commands are sent successfully.
• Medda Estiża: Operates with up to 1/2 mile range.
• Display LCD: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Kompatibilità tas-Sistema

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Viper 542V
• Viper 434V
• Viper 554V
• Viper 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Ipprepara Vettura:
   • Open the driver's side door.
   • Daħħal iċ-ċavetta fl-ignition.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Daħħal il-Mod ta 'Programmar:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and żomm it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and żomm it. The car's siren will chirp once.
4. Programm Remot: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Ħruġ mill-Modalità tal-Ipprogrammar: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Test Remote: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. It-Tħaddim tar-Remote

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Funzjonijiet Bażiċi:

• Lock: Press the lock button to arm your vehicle's security system and lock the doors.
• Nisfruttaw: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Bidu mill-bogħod: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Funzjonijiet Awżiljarji: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Manutenzjoni

Sostituzzjoni tal-batterija:

The Viper 479V remote requires żewġ batteriji AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Sib l-għatu tal-kompartiment tal-batterija fuq wara tar-remote.
2. Żerżaq jew neħħi l-għatu bir-reqqa biex tiftaħ il-kompartiment.
3. Neħħi l-batteriji AAA qodma.
4. Daħħal żewġ batteriji AAA ġodda, waqt li tiżgura l-polarità korretta (+/-).
5. Ibdel l-għatu tal-kompartiment tal-batterija b'mod sikur.

Kura u Immaniġġjar:

• Evita Espożizzjoni għall-Ilma: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Ipproteġi mill-Qtar: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Naddaf bil-mod: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Temperatura Estremi: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6 Issolvi l-problemi

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• Remote Mhux Jirrispondi:
  • Iċċekkja u ibdel il-batteriji AAA.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Firxa Mnaqqsa:
  • Ibdel il-batteriji.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• Kwistjonijiet tal-Wiri LCD:
  • If the display is dim or blank, replace the batteries.
  • If the display is physically damaged, the remote may need replacement.
• Buttuni ma Jaħdmux:
  • Ensure the remote is clean and free of debris around the buttons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Speċifikazzjonijiet

8. Informazzjoni dwar Garanzija

The Viper 479V Responder Remote comes with a Garanzija tal-Manifattur ta' 1 SninDin il-garanzija tkopri difetti fil-materjali u fix-xogħol taħt użu normali. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Appoġġ

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• Viper Official Websit: Visit the official Viper websit għal aġġornamenti tal-prodott, FAQs, u dokumentazzjoni ta' appoġġ addizzjonali.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Servizz tal-Klijent: Refer to your product packaging or the Viper websit għal informazzjoni ta' kuntatt tas-servizz tal-konsumatur.