Manwali+

MXR 11180000001

MXR Bass D.I.+ Instruction Manual

Mudell: M80

Introduzzjoni

The MXR M80 Bass D.I.+ is a robust and versatile preamp pedal engineered to provide bass players with a wide array of tonal possibilities for both live performances and studio recording. It features independent clean and distortion channels, a 3-band EQ, a noise gate, and multiple output options, making it an essential tool for any bassist.

Setup

Before connecting the MXR Bass D.I.+, ensure all audio equipment is turned off to prevent damage. The pedal can be powered by a 9V battery or an external 9V DC power supply (not included).

It-Tħaddim tal-Unità

  • Batterija: Open the battery compartment on the bottom of the pedal and connect a 9V battery.
  • Provvista tal-Enerġija: Connect a 9V DC power adapter (center negative) to the POWER jack on the side of the pedal.
  • Qawwa fantasma: The unit can also be powered via phantom power from a mixing console through the DIRECT OUTPUT (XLR) connection. Ensure the PHANTOM/GROUND switch is set appropriately.
Ġenb view of MXR Bass D.I.+ showing power input and 1/4 inch jacks
Figura 1: Ġenb view of the MXR Bass D.I.+ showing the 9V DC power input and 1/4 inch input/output jacks.

Konnessjonijiet

  • DĦUL: Connect your bass guitar to this 1/4-inch jack.
  • RIŻULTAT: Connect this 1/4-inch jack to your bass ampl-input tal-lifer.
  • DIRECT OUTPUT (XLR): Connect this XLR output to a mixing console or recording interface for a balanced, direct signal.
  • PARALLEL OUTPUT: This 1/4-inch jack provides an unprocessed, buffered signal from your bass, useful for connecting to a tuner or a second ampaktar ħaj.
Ġenb view of MXR Bass D.I.+ showing XLR direct output
Figura 2: Ġenb view of the MXR Bass D.I.+ showing the XLR Direct Output.

Kontrolli Operattivi

The MXR Bass D.I.+ features a comprehensive set of controls to shape your bass tone. Refer to Figure 3 for the layout of the controls.

Fuq view of MXR Bass D.I.+ showing all controls and jacks
Figura 3: Fuq view of the MXR Bass D.I.+ with all controls labeled.

Clean Channel Controls

  • VOLUM NADIF: Adjusts the overall output level of the clean channel.
  • KULUR: Engages a preset EQ contour for a modern, scooped sound. This button illuminates when active.

Distortion Channel Controls

  • VOLUM: Controls the output level of the distortion channel.
  • TAĦLA: Mixes the distorted signal with the clean signal. Turn clockwise for more distortion, counter-clockwise for more clean tone.
  • TRIGGER: Sets the threshold for the built-in noise gate. Higher settings require a stronger input signal to open the gate.
  • QLIGĦ: Adjusts the amount of distortion applied to the signal.

Taqsima EQ

  • BASS: Jaġġusta r-rispons ta' frekwenza baxxa.
  • MID: Jaġġusta r-rispons tal-frekwenza medja.
  • TREBLE: Jaġġusta r-rispons ta' frekwenza għolja.

Switches and Footswitches

  • PHANTOM/GROUND: This switch controls the ground lift for the XLR output and enables phantom power operation. Set to 'Ground' to lift the ground and eliminate hum.
  • XATBA: Activates or deactivates the noise gate. The LED illuminates when the gate is active.
  • EFFECT Footswitch: Toggles the entire effect (clean channel with EQ) on/off. The red LED indicates the effect is active.
  • DISTORTION Footswitch: Engages or disengages the distortion channel. The red LED indicates distortion is active.

Manutenzjoni

To ensure the longevity and optimal performance of your MXR Bass D.I.+, follow these maintenance guidelines:

  • Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-pedala. Evita prodotti tat-tindif jew solventi li joborxu.
  • Ħażna: Aħżen il-pedala f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
  • Sostituzzjoni tal-batterija: If using battery power, replace the 9V battery when the pedal's performance degrades or the indicator LEDs dim. Disconnect the input cable when not in use to conserve battery life.
  • Konnessjonijiet: Periodically check all cables and connections for wear and tear. Ensure jacks are free of dust and debris.

Issolvi l-problemi

If you encounter issues with your MXR Bass D.I.+, refer to the following common problems and solutions:

  • Ebda Ħsejjes:
    • Iċċekkja l-konnessjonijiet kollha tal-kejbil (input, output, power).
    • Ensure the pedal is receiving power (check battery or power supply).
    • Verify that the EFFECT footswitch is engaged (red LED on).
    • Check the volume knobs on the pedal and your ampaktar ħaj.
  • Żanżin jew Buzz:
    • Try engaging the PHANTOM/GROUND switch to lift the ground.
    • Ensure all power supplies are properly grounded and not interfering with other electronics.
    • Iċċekkja għal kejbils difettużi.
  • Distortion Not Engaging:
    • Ensure the DISTORTION footswitch is engaged (red LED on).
    • Adjust the GAIN knob to a higher setting.
  • Signal Cutting Out (Noise Gate):
    • If the GATE is active, lower the TRIGGER knob setting.
    • If the GATE is not desired, disengage the GATE switch.

Speċifikazzjonijiet

Karatteristika Dettall
Numru tal-Mudell M80 (11180000001)
Dimensjonijiet (L x W x H) 5.75 x 4.5 x 2.75 pulzieri (madwar)
Piż tal-oġġett 8 uqija
Sors tal-Enerġija 9V DC (center negative) or 9V Battery or Phantom Power
Format tas-Sinjal Analogu
Interface tal-Ħardwer Awdjo ta' 1/4 pulzier, XLR

Garanzija u Appoġġ

For detailed warranty information and technical support, please refer to the official MXR or Dunlop Manufacturing websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

Riżorsi onlajn:

Dokumenti Relatati - 11180000001

Preview MXR Distortion + Manwal tat-Tħaddim - Pedala tal-Effetti tal-Kitarra
Manwal uffiċjali tat-tħaddim għall-MXR Distortion +, modifikatur elettroniku tal-ħoss iddisinjat biex iżid effetti ta' distorsjoni kkontrollata mal-kitarri u l-pjanijiet. Jinkludi noti ta' applikazzjoni, speċifikazzjonijiet, u informazzjoni dwar il-garanzija.
Preview Pedala tal-Kitarra MXR Randy Rhoads Edizzjoni Speċjali Distortion+
Skopri l-pedala tal-kitarra MXR Randy Rhoads Special Edition Distortion+, rikostruzzjoni fidila tal-MXR Distortion+ klassika ddisinjata biex taqbad it-toni ikoniċi ta' Randy Rhoads. Tinkludi dettalji dwar il-kontrolli, it-tħaddim, u l-ispeċifikazzjonijiet.
Preview MXR Jail Guitar Doors Drive JGD1 - Pedala tad-Distorsjoni tal-Kitarra
Esplora l-MXR Jail Guitar Doors Drive (JGD1), pedala tad-distorsjoni unika ispirata minn Wayne Kramer u MC5. Tgħallem dwar il-kontrolli, l-ispeċifikazzjonijiet, u l-għażliet tal-enerġija tagħha.
Preview Manwal tal-Utent tal-MXR Bass Synth MB301
Gwida komprensiva għall-pedala MXR Bass Synth MB301, li tiddettalja l-karatteristiċi, il-kontrolli, il-presets, it-tħaddim, u l-ispeċifikazzjonijiet tagħha għal bassisti li qed ifittxu vintagtoni sintetizzaturi ta' stil analogu.
Preview Pedala tal-Kitarra MXR Randy Rhoads Distortion+ - Manwal tal-Utent u Speċifikazzjonijiet
Gwida komprensiva għall-pedala tal-effetti tal-kitarra MXR Randy Rhoads Distortion+ (RR104), li tkopri l-kontrolli esterni tagħha, it-tħaddim bażiku, ir-rekwiżiti tal-enerġija, u l-ispeċifikazzjonijiet tekniċi. Tgħallem kif tikseb toni klassiċi ta' distorsjoni.
Preview Gwida għall-Utent tal-Provvista tal-Enerġija MXR M239 Mini Iso-Brick
Gwida komprensiva għall-MXR M239 Mini Iso-Brick Power Supply, li tiddeskrivi l-karatteristiċi, l-operat, il-metodi ta' konnessjoni, il-passi għas-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet tekniċi tagħha għall-mużiċisti li jħaddmu l-pedali tal-kitarra.