Serje Klassika ta' Bogen Amp Manwal ta' Istruzzjoni C20

1. Introduzzjoni

This manual provides essential instructions for the proper installation, operation, and maintenance of your Bogen Classic Series Amp C20. Please read this manual thoroughly before using the product to ensure safe and efficient performance. Retain this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: Dan il-prodott fih kimiċi magħrufa mill-Istat ta ’Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.

Always observe basic safety precautions when using electrical equipment to reduce the risk of fire, electric shock, and injury to persons.

• Tesponix dan l-apparat għax-xita jew l-umdità.
• Timblokkax il-fetħiet tal-ventilazzjoni. Installa skont l-istruzzjonijiet tal-manifattur.
• Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
• Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.

3. Prodott Aktarview

The Bogen Classic Series Amp C20 is a single-channel amplifier designed for various audio applications. It features robust construction and reliable performance.

3.1 Karatteristiċi ewlenin

• Kanal wieħed ampaktar ħaj
• Surface Mount design
• Input voltage: 120 Volts
• Qawwa tal-Ħruġ: 20 Watts

3.2 Kontenut tal-Pakkett

Meta tiftaħ il-pakkett, ivverifika li l-oġġetti li ġejjin huma inklużi:

• Serje Klassika ta' Bogen Amp C20
• Lembut
• Manwal ta 'Istruzzjoni (dan id-dokument)

3.3 Kontrolli u Indikaturi tal-Panew ta' Quddiem

Image 1: Front panel of the Bogen Classic Series Amp C20. This image displays the MIC1, MIC2, AUX, and TREBLE control knobs, along with the POWER switch and the "Classic Series" branding.

1. MIC1 Input Level Control: Adjusts the volume for Microphone Input 1.
2. MIC2 Input Level Control: Adjusts the volume for Microphone Input 2.
3. AUX Input Level Control: Adjusts the volume for the Auxiliary input.
4. Kontroll tat-TREBLE: Adjusts the high-frequency response of the audio output.
5. Swiċċ POWER: Jaqleb il- amplifier's power on and off.

3.4 Konnessjonijiet tal-Panew ta' wara

Image 2: Rear panel of the Bogen Classic Series Amp C20. This image shows the various input and output connections, including power input and speaker terminals.

The rear panel contains connections for power, microphone inputs, auxiliary inputs, and speaker outputs. Specific details on these connections are provided in the Setup section.

4. Setup u Installazzjoni

4.1 Immuntar

The Bogen Classic Series Amp C20 is designed for surface mounting. Ensure the mounting surface is stable and capable of supporting the unit's weight (approximately 4.5 pounds). Allow adequate ventilation around the unit to prevent overheating.

4.2 Konnessjoni Elettrika

1. Ensure the POWER switch on the front panel is in the OFF position.
2. Connect the power cord to a standard 120 Volt AC outlet.

4.3 Konnessjonijiet tal-Input tal-Awdjo

Qabbad is-sorsi awdjo tiegħek mal-inputs xierqa fuq il-pannell ta' wara:

• Mikrofoni: Connect microphones to the MIC1 and MIC2 input jacks.
• Apparati Awżiljarji: Connect line-level audio sources (e.g., CD player, media player) to the AUX input jacks.

4.4 Konnessjonijiet tal-Output tal-Ispeaker

Connect your speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for all speaker connections. Refer to your speaker's manual for impedance matching requirements.

5. Operazzjoni

5.1 Tixgħel/Jitfi

1. Biex titħaddem il- amplifier, press the POWER switch on the front panel to the ON position. The power indicator (if present) will illuminate.
2. To power off, press the POWER switch to the OFF position.

5.2 Adjusting Input Levels

1. Start with all input level controls (MIC1, MIC2, AUX) set to their minimum position.
2. Begin playing audio from your desired source.
3. Slowly increase the corresponding input level control until the desired volume is achieved.
4. Adjust the TREBLE control to fine-tune the high-frequency response to your preference.

5.3 Pariri Ġenerali dwar l-Użu

• Avoid setting volume levels too high, which can cause distortion and potentially damage speakers.
• Ensure all connections are secure before operating the ampaktar ħaj.

6. Manutenzjoni

6.1 Tindif

Imsaħ il-barra tal- amplifier with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components.

6.2 Ventilazzjoni

Iċċekkja regolarment li l-fetħiet tal-ventilazzjoni jkunu nodfa mit-trab u l-fdalijiet biex tiżgura fluss tal-arja xieraq u tevita li jisħon iżżejjed.

6.3 Is-servizz

M'hemm l-ebda partijiet li jistgħu jintużaw mill-utent ġewwa l- amplifier. Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.

7 Issolvi l-problemi

If you experience issues with your Bogen Classic Series Amp C20, consult the following table before contacting support.

8. Speċifikazzjonijiet

Nota: L-ispeċifikazzjonijiet huma soġġetti għal bidla mingħajr avviż.

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the official Bogen webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta’ garanzija.

Informazzjoni ta' Kuntatt:

• Websit: www.bogen.com (Placeholder, actual URL jistgħu jvarjaw)
• Servizz tal-Klijent: Irreferi għall- websit għad-dettalji ta' kuntatt reġjonali.