TEAC RW-D200 Dual Deck CD Recorder and Player

Introduzzjoni

This manual provides essential information for the proper setup, operation, and maintenance of your TEAC RW-D200 Dual Deck CD Recorder and Player. Please read this manual thoroughly before using the unit to ensure optimal performance and longevity.

Figura 1: Quddiem view of the TEAC RW-D200 Dual Deck CD Recorder and Player, showing the two CD trays, display, and control buttons.

Setup

Spakkjar u Tqegħid

Carefully remove the unit from its packaging. Retain all packing materials for future transport or storage. Place the RW-D200 on a stable, level surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure adequate ventilation around the unit.

Konnessjoni mas-Sistema tal-Awdjo Tiegħek

1. Konnessjoni tal-Awdjo: Connect the audio output jacks (RCA L/R) on the rear of the RW-D200 to an available input on your amplifier or receiver using RCA audio cables. For recording, connect the audio output of your source device (e.g., another CD player, cassette deck) to the audio input jacks (RCA L/R) on the rear of the RW-D200.
2. Konnessjoni tal-Enerġija: After all audio connections are made, plug the AC power cord into a standard electrical outlet.

Istruzzjonijiet Operattivi

Daqq Bażiku tas-CD

1. Agħfas il- QAWWA buttuna biex tixgħel l-unità.
2. Agħfas il- FTUĦ/MAGĦLUQ button for either Deck 1 or Deck 2 to open the disc tray.
3. Place a CD (CD-R or CD-RW) onto the disc tray with the label side facing up.
4. Agħfas il- FTUĦ/MAGĦLUQ buttuna mill-ġdid biex tagħlaq it-trej.
5. Agħfas il- PLAY button for the selected deck to begin playback.

Recording CDs (CD-R/CD-RW)

The RW-D200 supports recording onto both CD-R and erasable CD-RW discs. It features a 2X dub speed for efficient recording.

1. Insert a source CD into Deck 1 (Player) and a blank recordable CD-R or CD-RW into Deck 2 (Recorder).
2. Select the desired recording mode (e.g., Synchro Recording, Manual Recording). Refer to the display for options.
3. Adjust the recording level using the LIVELL REC controls to prevent distortion. The unit features 24-bit Analog-to-Digital/Digital-to-Analog Converters for high-quality audio.
4. Agħfas il- REKORD button on Deck 2 to start recording. Playback from Deck 1 will automatically begin.
5. Agħfas il- STOP button on Deck 2 to end recording.
6. Finalizing Disc: After recording, it is crucial to finalize CD-R discs to make them playable on other CD players. Follow the on-screen prompts or refer to the unit's display for the finalization process. CD-RW discs do not require finalization for playback on the RW-D200 but may for other players.

Manutenzjoni

Tindif tal-Unità

• Imsaħ il-barra tal-unità b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif, xama' jew solventi li joborxu.
• To clean the disc trays, use a soft, lint-free cloth. Avoid touching the optical lens inside the disc compartment.

Disc Handling and Storage

• Always handle discs by their edges to avoid fingerprints and scratches.
• Store discs in their cases when not in use, away from direct sunlight and high temperatures.

Issolvi l-problemi

If you experience issues with your RW-D200, please consult the following table before seeking professional service.

Speċifikazzjonijiet

• Ditta: Tassej
• Isem tal-Mudell: RW-D200
• Numru tal-Mudell tal-Oġġett: RWD200
• Kulur: Iswed
• Teknoloġija tal-Konnettività: Awżiljarju
• Karatteristiċi Speċjali: Dual-Deck, CD-R/RW Compatible, 2X Dub Speed
• Analog-to-Digital/Digital-to-Analog Converters: 24-bit
• Piż tal-oġġett: 14.5 liri

Garanzija u Appoġġ

This TEAC RW-D200 unit comes with a 1-Year Teac Warranty. For warranty claims, technical support, or further assistance, please contact Teac customer service. Keep your purchase receipt as proof of purchase for warranty purposes.

For additional information or to find authorized service centers, please visit the official Teac webis-sit jew ikkuntattja l-kanali ta' appoġġ tagħhom.