1. Informazzjoni Importanti dwar is-Sigurtà
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.
- TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mis-circuit breaker jew mill-kaxxa tal-fjużijiet qabel l-installazzjoni jew is-servizz.
- Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC). Ikkonsulta elettriċista kwalifikat jekk m'intix familjari mal-konnessjonijiet xierqa tal-wajers elettriċi.
- Use only UL/cUL listed wire connectors.
- This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning). Wash hands after handling.
2. Prodott Aktarview
The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.
Figura 2.1: Quddiem view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.
Figura 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.
3. Setup u Installazzjoni
3.1 Kontenut tal-Pakkett
Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.
3.2 Qabel l-Installazzjoni
- Itfi l-enerġija mis-circuit breaker prinċipali jew mill-kaxxa tal-fjusijiet.
- Carefully unpack the fixture and components.
3.3 Immuntar tal-Fitture
This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.
- Waħħal il-parentesi tal-immuntar mal-kaxxa tal-junction billi tuża l-viti pprovduti.
- Ensure the bracket is level and securely fastened.
3.4 Konnessjonijiet elettriċi
Connect the fixture wires to the house wires according to the following:
- Qabbad il-wajer iswed mill-apparat tad-dawl mal-wajer iswed (sħun) mill-kaxxa tal-junction.
- Qabbad il-wajer abjad mill-apparat tad-dawl mal-wajer abjad (newtrali) mill-kaxxa tal-junction.
- Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box.
- Secure all connections with UL/cUL listed wire connectors.
3.5 L-Iżgurar tal-Apparat
- B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-junction.
- Align the fixture with the mounting bracket and secure it using the provided screws or nuts.
3.6 Installazzjoni tal-Bozza
This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.
Figura 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.
- Screw the bulb into the socket until snug. Do not overtighten.
- This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.
3.7 Pjazzament Rakkomandat
For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.
Figura 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.
Figura 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.
4. Operazzjoni
Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.
5. Manutenzjoni
5.1 Tindif
Biex tnaddaf l-apparat, itfi l-elettriku u imsaħ b'ċarruta ratba u damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
5.2 Sostituzzjoni tal-Bozza
Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.
6 Issolvi l-problemi
- Id-dawl ma jixgħelx:
- Check that the power is turned on at the circuit breaker.
- Ensure the bulb is securely screwed into the socket and is not burnt out.
- Iċċekkja li l-konnessjonijiet elettriċi kollha huma siguri.
- Inspect for any defective electrical components or wiring.
- Fuse blows or circuit breaker trips:
- Check for crossed wires or short circuits.
- Żgura li l-bozza wattage does not exceed the fixture's maximum rating (100W).
7. Speċifikazzjonijiet
Figura 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | P5607-31 |
| Brand | Progress Progress |
| Dimensjonijiet (L x W x H) | 4.5" x 4.5" x 8" (4-9/16" W x 8-5/8" H) |
| Piż tal-oġġett | 1 lira (16 uqija) |
| Materjal | Aluminju |
| Tip Finish | Clear (Glass) |
| Kulur | Iswed |
| Stil | Tradizzjonali |
| Tip ta' Sors tad-Dawl | Inkandexxenti (kompatibbli mal-LED) |
| Bażi tal-Bozza | E26 (Bażi Medja) |
| Max Wattage | 100 Watts |
| Voltage | 120 Volts |
| Luminożità | 1600 lumen (with 100W incandescent) |
| Livell ta 'Reżistenza għall-Ilma | Reżistenti għall-Ilma |
| Tip ta 'Immuntar | Protruding (Wall Mount) |
| UPC | 785247560738 |
8. Informazzjoni dwar Garanzija
Dan il-prodott ta' Progress Lighting huwa kopert minn Garanzija Limitata ta' sena. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.
9. Appoġġ
For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official webis-sit jew fuq l-imballaġġ tal-prodott.
