Master Lock 90DSPT Gun Trigger Lock User Manual

Introduzzjoni

The Master Lock 90DSPT Gun Trigger Lock is designed to provide an additional layer of security for your firearms, helping to prevent unauthorized access. This manual provides essential information on the proper installation, operation, and maintenance of your trigger lock to ensure its effective use.

Informazzjoni Importanti dwar is-Sigurtà

WARNING: DO NOT use this lock on a loaded gun. A loaded gun must always be regarded as dangerous. Attempts to use on a loaded gun may result in accidental discharge.

If the lock does not securely fit your firearm or becomes damaged, do not attempt to continue using this product on your firearm.

This product is not guaranteed to lock all firearms. It is designed to block access to many guns when properly attached. Some firearms, such as certain lever action rifles, those without a trigger guard surrounding the trigger, or guns with extra light/wide triggers or trigger shoes/extensions, may not be effectively secured by this lock.

Always ensure the firearm is unloaded and cleared before attempting to install or remove the trigger lock.

Prodott Overview u Komponenti

The Master Lock 90DSPT Gun Trigger Lock features a robust design for reliable security. It consists of two main halves that enclose the firearm's trigger guard, secured by a key-operated mechanism.

Image: The Master Lock 90DSPT Gun Trigger Lock, showing the two halves and one of the included keys.

• Steel and Zinc Body: Provides maximum durability and resistance to tampering.
• Protective Rubber Pads: Cushioned pads on the interior surfaces protect the firearm's finish from marring or scratching during installation and use.
• Adjustable Ratchet Mechanism: Allows for a secure and snug fit on various trigger guard sizes.
• Keyed Locking Cylinder: Features a 4-pin tumbler for pick resistance.
• Two Keys: Each lock comes with two brass keys for convenience.

Immaġni: Splodiet view of the Master Lock 90DSPT, highlighting the protective rubber pads and the two included keys.

Image: Close-up of the Master Lock 90DSPT, emphasizing its steel and zinc body construction for maximum durability.

Setup u Installazzjoni

Follow these steps to properly install the Master Lock 90DSPT Gun Trigger Lock on your firearm:

1. Ensure Firearm is Unloaded: Before handling any firearm, always verify that it is completely unloaded. Remove the magazine (if applicable) and clear the chamber.
2. Separate Lock Halves: Insert one of the provided keys into the lock cylinder and turn it to unlock and separate the two halves of the trigger lock.
3. Position Lock: Place one half of the trigger lock on one side of the firearm's trigger guard, ensuring the trigger is fully enclosed within the lock's opening. The protective rubber pads should be in contact with the firearm's finish.
4. Join Halves: Bring the second half of the trigger lock to meet the first, enclosing the trigger guard. Press the two halves firmly together. The adjustable ratchet mechanism will click as it secures around the trigger guard.
5. Sigurtà tat-Test: Once the lock is closed, attempt to pull the trigger to ensure it is fully blocked and cannot be engaged. Also, try to pull the lock halves apart to confirm a secure fit.
6. Neħħi ċ-Ċavetta: Turn the key and remove it from the lock cylinder. Store keys in a secure location away from the firearm.

Immaġni: Eżamples of the Master Lock 90DSPT installed on handguns, rifles, and shotguns, demonstrating its versatility.

Istruzzjonijiet Operattivi

To operate your Master Lock 90DSPT Gun Trigger Lock:

• Biex Tissakkar: After positioning the lock halves around the trigger guard, press them firmly together until the ratchet mechanism engages and the lock is securely closed. Remove the key.
• Biex Nisfruttaw: Insert the correct key into the lock cylinder and turn it. The two halves of the lock will release, allowing you to remove the lock from the firearm.

Manutenzjoni

To ensure the longevity and proper function of your Master Lock 90DSPT Gun Trigger Lock:

• Keep the lock clean and free from dirt and debris.
• Periodically inspect the rubber pads for wear or damage.
• If the key mechanism becomes stiff, a small amount of graphite lubricant can be applied to the keyway.
• Store the lock in a dry environment when not in use.

Issolvi l-problemi

If you encounter issues with your Master Lock 90DSPT Gun Trigger Lock, consider the following:

• Is-Serratura Ma Toqgħodx: Verify that your firearm's trigger guard dimensions are compatible with the lock's design. Some firearms with unusually wide or narrow trigger guards, or those with trigger shoes/extensions, may not be suitable.
• Lock Feels Loose: Ensure the two halves are pressed firmly together until the ratchet mechanism fully engages. The lock should fit snugly without excessive movement.
• Key Is Stiff or Stuck: Ensure you are using the correct key. Do not force the key. Apply a small amount of graphite lubricant to the keyway if needed.
• Informazzjoni dwar ir-Recall: Please be aware of a past recall for certain Master Lock gun locks manufactured before June 20, 1999, or those with specific markings. The recalled locks could be manually separated without a key. If you have concerns about your lock, especially if it was purchased around or before this period, contact Master Lock customer service for verification and potential replacement. For more information, refer to the manufacturer's notice or visit the Master Lock websit.

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

The Master Lock 90DSPT Gun Trigger Lock comes with a Garanzija Limitata tul il-Ħajja. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Master Lock websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Appoġġ għall-Klijent

For further assistance, technical support, or inquiries regarding your Master Lock 90DSPT Gun Trigger Lock, please visit the official Master Lock website or contact their customer service. Contact information can typically be found on the product packaging or the manufacturer's websit.

As per the manufacturer's notice regarding the recall, you can call Master Lock at (800) 944-1380 between 8 a.m. and 5 p.m. CT Monday through Friday, or visit www.masterlock.com/recall.html for recall-specific information.