AOKIN Raspberry Pi Modulu tal-Wiri ta' 3.5 Pulzieri
Speċifikazzjonijiet
- Provvista tal-Enerġija: 5V 2.5A rakkomandata
- Kompatibbiltà: Raspberry Pi
- Riżoluzzjoni: Jiddependi fuq l-Immaġni tas-Sistema Operattiva
- Installazzjoni tas-Sewwieq Meħtieġa: Iva
Karatteristiċi
- 320×480 resolution, LCD Interface: SPI(Fmax:32MHz)
- Resistive touch control, comes with touch pen
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B, 5 versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- GPIO physical interface, Size perfectly fits the Raspberry Pi
- Supports Raspbian system, ubuntu system ,kali Linux system
Install OS image with pre-loaded LCD Driver
Warm Tips: If you have difficulty installing the driver, or if you stil can’t use the display property after installing the driver, Please Try our Configned images for tested.
Just need to download(the following link) and write the image into the TF card. DO NOT reed any driver installation steps,
https://mega.nz/folder/ixQiTa7R#EM2uFGwMC8QSU6D4untoGA
https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjl-Xrtaw
https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjl-Xrtaw
- Download and unzip the CS Image you intend to use
- Download and install Raspberry Pi image burn software
- Use Raspberry Pi imager software to flash the OS Image with preloader LCD Driver to the SD card
Passi ：
Għajnuniet Saħħan：If you have difficulty installing the driver, or if you still can’t use the display properly after installing the driver, Please Try our Configned images for tested. Just need download and write the image into the TF card. DO NOT need any driver installation steps.
- Download and unzip the OS Image you intend to use
- Download and install Raspberry Pi image burn software
- Use Raspberry Pi imager software to flash the OS lmage with pre-loadder LCD Driver to the SD card
If you still keep getting the white screen issue, try the Raspbian Bullseye version at last.
Compatible with (directly-pluggable)
Għajnuniet
- Meta tuża mar-Raspberry Pi, l-ewwel trid tinstalla s-sewwieq u tikteb il-kodiċi, inkella l-iskrin se juri biss abjad.
- Huwa rakkomandat li tuża provvista tal-enerġija 'l fuq minn 5V 2.5A, inkella tista' ma tixgħelx u l-iskrin se juri biss abjad.
Interfaces & Description
3.5 inch Raspberry Pi Touch Screen
Mistoqsijiet Frekwenti
What should I do if I encounter a white screen issue?
If you are facing a white screen problem, try using the Raspbian Bullseye version as a last resort.
Dokumenti / Riżorsi
 |
AOKIN Raspberry Pi Modulu tal-Wiri ta' 3.5 Pulzieri [pdfManwal tas-Sid Raspberry Pi A Modulu tal-Wiri ta' 3.5 Pulzieri, Modulu tal-Wiri ta' 3.5 Pulzieri, Modulu tal-Wiri, Modulu |