Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Veise VE017 Fingerprint Smart Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. The Veise VE017 offers advanced security and convenience with multiple access methods including fingerprint, PIN code, key fobs, and traditional keys, all manageable via a smart app.
X'hemm fil-Kaxxa
Qabel tibda l-installazzjoni, jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti:
- Assemblea Esterni
- Assemblea Intern
- Qoxra tal-batterija
- Karta tal-Utent x2
- Irrisettja Għodda x1
- Lukkett x1
- Ċavetta Mekkanika x2
- Reinforcement Plate (optional)
- Strajk
- Strike Screws x5 (2 Spare)
- Viti tal-lukkett x2
- Viti tal-Pjanċa tal-Immuntar x2
- Kullar Drive-In (Mhux obbligatorju)
- Pjanċa tal-Immuntar x1
Gwida għall-Installazzjoni
Noti Importanti għall-Installazzjoni:
- It is strongly recommended to keep the door open or ajar during installation.
- Do not close the door before inserting the batteries.
- Do not insert the batteries until the lock is fully installed.
Pass 1: Kejjel id-Dimensjonijiet
Qabel ix-xiriasing and installing, ensure your door dimensions are compatible with the lock. Measure the hole spacing and door thickness.
- Dahar lura: 2-3/8" jew 2-3/4" (60mm jew 70mm)
- Dijametru tat-Toqba: 1-1/2" to 2-1/8" (38mm to 54mm)
- Ħxuna tal-Bieb: 1-3/8" or 2" (35mm or 50mm). Door thickness out of spec may prevent lock operation.
- Latch Hole Depth: 1" (25mm). Ensure the door frame is aligned with the door. Verify there are no obstructions in the door frame. The hole in the door frame must be drilled to a minimum depth of 1" (25 mm).
Pass 2: Installa l-lukkett u l-istrajk
Install the latch into the door edge. Ensure the "up" marking on the latch is correctly oriented. Confirm the type of hole in the edge of the door frame.
Importanti:
The latch bolt should be fully retracted (in the unlocked position) before proceeding.
For doors with 1-1/2" (38mm) holes, temporarily install the Latch bolt to test if it fits properly. If the Latch bolt is stuck, you need to extend the Latch hole by at least 13/64" (5mm) deep using a 1" (25.4mm) Drill Bit.
Pass 3: Installa l-Assemblea Esterni
Route the cable below the latch and insert the torque blade through the slot in the latch. Install the mounting plate, ensuring it is parallel to the door edge and screws are not overtightened.
Pass 4: Installa l-Assemblea Intern
Disassemble the battery cover. Insert the cable connector into the socket, pushing firmly until fully seated. Align the torque blade with the knob hole, ensuring the knob holes are parallel. Attach the interior assembly to the mounting plate and tighten the 3 screws. Finally, insert 4 AA Alkaline batteries.
Importanti:
Do not install the batteries until the lock is fully installed. Be sure not to use the wrong screws, or it may lead to short-circuit and other problems.
Pass 5: Irrisettja s-Serratura
Using the reset tool, press and hold the reset button for 5 seconds until you hear "Restored to factory settings" and a "BEEP". This indicates a successful reset, and the latch will extend automatically. After the reset, the lock automatically recognizes the left and right doors. Attach the battery cover.
Installazzjoni Video
For a visual guide, please watch the official installation video:
Istruzzjonijiet Operattivi
Multiple Access Methods
The Veise VE017 Smart Door Lock offers 5 convenient access methods:
- Marka tas-swaba ': Quick and secure biometric access.
- Kodiċi PIN: Customizable numerical codes for entry.
- Ċavetta Fobs: RFID-enabled cards for tap-to-unlock convenience.
- Spare Key: Traditional mechanical key for emergency backup.
- KK Home App Control: Manage your lock remotely via the smartphone application.
Smart App and Web Maniġer
Manage your lock's features and access permissions using the dedicated smartphone app or web manager. This allows for comprehensive control over your door security.
- Immaniġġja l-Utenti: Add or remove users and their access credentials.
- Access Time Logs: View a history of who entered and when.
- Grant Remote Access Offline: Provide temporary access even when not connected to the internet.
- Kompatibilità: The lock is compatible with Alexa and Google Home for integrated smart home control.
Multiple PIN Code Types
The smart lock supports various types of PIN codes to suit different access needs:
- Remote Unlimited One-Time PIN Code: For single-use access.
- Remote Unlimited Duration PIN Code: For access within a specified time frame.
- Permanent PIN Code: For regular, unrestricted access.
- Recurring PIN Code: For scheduled, repeated access (e.g., for cleaners).
Manutenzjoni
To ensure the longevity and optimal performance of your Veise VE017 Smart Door Lock, follow these maintenance guidelines:
- Sostituzzjoni tal-batterija: The lock uses 4 AA Alkaline batteries. Replace all batteries when the low battery indicator appears or when the lock's response time slows down. Always use new, high-quality alkaline batteries.
- Tindif: Naddaf il-barra tas-serratura b'ċarruta ratba u damp drapp. Evita li tuża prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti elettroniċi.
- Sensor tal-marki tas-swaba': Keep the fingerprint sensor clean and free of dirt or oils for accurate readings.
- Tastiera: Regularly wipe the keypad to prevent grime buildup.
- Komponenti mekkaniċi: Periodically check the latch and strike plate for any obstructions or wear. Ensure the latch moves freely.
- Aġġornamenti tas-Software: Keep the associated smartphone app updated to the latest version to benefit from new features, security enhancements, and bug fixes.
Issolvi l-problemi
If you encounter issues with your Veise VE017 Smart Door Lock, consider the following common troubleshooting steps:
- Is-Serratura Ma Tirrispondix:
- Check the batteries. Replace them if they are low or depleted.
- Ensure the battery cover is securely attached and the cable connector is fully seated.
- Perform a factory reset (refer to Step 5 in the Installation Guide).
- Marka tas-Swaba' Mhux Rikonoxxuta:
- Kun żgur li subgħajk ikun nadif u niexef.
- Try re-registering your fingerprint in the app.
- Clean the fingerprint sensor surface.
- PIN Code Not Working:
- Iċċekkja li qed iddaħħal il-kodiċi PIN korrett.
- Check the PIN code's validity period (for duration or one-time codes) in the app.
- Ensure the keypad is clean and responsive.
- Kwistjonijiet ta' Konnettività tal-App:
- Ensure Bluetooth is enabled on your smartphone and you are within range of the lock.
- Restart the app and/or your smartphone.
- Iċċekkja għal aġġornamenti tal-app.
- If using Wi-Fi gateway (sold separately for remote access), ensure it is properly connected and configured.
- Latch Bolt Stuck:
- Ensure the latch hole in the door frame is deep enough and free of obstructions (refer to Step 1 and 2 of Installation).
- Check if the torque blade is correctly aligned with the knob hole (refer to Step 4 of Installation).
Jekk dawn il-passi ma jsolvux il-problema, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Isem tad-Ditta | Veise |
| Mudell | VE017 |
| Provvista tal-Enerġija | BATTERIJA NIXXA |
| Metodu ta 'Installazzjoni | Installazzjoni tat-tħaffir |
| Immaniġġja Direzzjoni | Direzzjoni Riversibbli |
| Tip Finish | Żejt li jingħorok |
| Funzjoni tal-pum tal-bieb | Key & Keypad |
| Modi Kif Tiftaħ | Ċwievet Mekkaniċi |
| Oriġini | Iċ-Ċina kontinentali |
| Hign-konċernat Kimika | Xejn |
Garanzija u Appoġġ
If you have any questions or require assistance with your Veise VE017 Smart Door Lock, please contact our customer support team first.
- Noll bla ħlas: +1 (855) 400-3853 (USA)
- Disponibbiltà: Monday - Friday, 9:00 AM - 5:00 PM PST
- Email: support@iveise.com (24/7 email support)
Please refer to the product packaging or official Veise websit għal dettalji speċifiċi tal-garanzija.
