Manwal tal-Utent tas-Splitter HDMI 4K TESmart HSW0401A1U

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your TESmart HSW0401A1U 4K HDMI Splitter. This device allows you to connect up to four HDMI source devices to a single display, supporting high-resolution video and versatile audio output options. Please read this manual thoroughly before use to ensure optimal performance and safety.

Figure 1: TESmart HSW0401A1U 4K HDMI Splitter

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-kontenut tal-pakkett mal-wasla tiegħu biex tiżgura li l-oġġetti kollha huma preżenti u bla ħsara:

• 1 x TESmart HSW0401A1U HDMI Splitter
• 1 x Kontroll mill-bogħod IR
• 1 x DC 5V 1A Power Adapter
• 1 x Manwal għall-Utent

Figure 2: What's in the Box - HDMI Splitter, IR Remote, Power Adapter, and User Manual.

Karatteristiċi tal-Prodott

• 4-in-1-out HDMI Switching: Share one monitor, display, or projector among four HDMI source devices.
• Appoġġ għal Riżoluzzjoni Għolja: Achieves resolutions up to 3840x2160@60Hz with 4:4:4 chroma subsamplipp.
• HDMI 2.0 & HDCP 2.2 Compliant: Ensures compatibility with modern high-definition content and devices.
• EDID Emulators: Features EDID emulators in each input port to ensure connected PCs always receive correct display information.
• Multi-interface Audio Output: Supports independent audio output via S/PDIF optical and L/R AUX interfaces.
• Modi Awdjo: Switch between 2.0, 5.1, and Auto audio output modes.
• Metodi ta' Swiċċjar Multipli: Easy input source switching via front panel buttons, IR remote control, or automatic switching.
• Appoġġ għall-HDR 10: Enhances visual quality with High Dynamic Range.
• Dolby TrueHD Support: Provides high-fidelity audio experience.

Figure 3: Support for Ultra High-definition 4K@60Hz.

Figure 4: Multi-interface audio output supporting S/PDIF and L/R AUX.

Setup Istruzzjonijiet

Segwi dawn il-passi biex twaqqaf l-HDMI Splitter tiegħek:

1. Apparat mitfi: Ensure all HDMI source devices (e.g., gaming consoles, Blu-ray players) and your display are powered off before making any connections.
2. Qabbad Sorsi HDMI: Connect up to four HDMI source devices to the HDMI Input ports (1, 2, 3, 4) on the rear panel of the splitter. Note that the input ports are labeled from right to left (Input 1, Input 2, Input 3, Input 4).
3. Qabbad HDMI Display: Connect your HDMI display (TV, monitor, projector) to the HDMI Output port on the rear panel.
4. Qabbad l-Output tal-Awdjo (Mhux obbligatorju):
   • For optical digital audio, connect an S/PDIF cable from the splitter's S/PDIF port to your audio receiver or soundbar.
   • For analog stereo audio, connect a 3.5mm audio cable from the splitter's L/R AUX port to your audio system.
5. Qabbad l-Enerġija: Plug the DC 5V 1A Power Adapter into the DC 5V port on the splitter and then into a power outlet.
6. Apparat ta' Qawwa: Power on your display first, then your HDMI source devices.

Figure 5: Front and Rear Panel Layout with Input/Output Ports.

Istruzzjonijiet Operattivi

The TESmart HDMI Splitter offers several methods for switching between input sources and adjusting audio settings:

Qlib tas-Sors tal-Input:

• Buttuni tal-Panew ta 'Quddiem: Press the 'Input' button on the front panel to cycle through the connected HDMI sources (1, 2, 3, 4). The corresponding Input Selection Status LED will illuminate.
• Kontroll mill-bogħod IR: Use the included IR remote control to directly select an input source by pressing the numbered buttons (1, 2, 3, 4).
• Qlib Awtomatiku: The splitter supports automatic switching. When a new active HDMI source is detected, the splitter can automatically switch to that input.

Audio Format Selection:

• Press the 'Audio' button on the front panel or the remote control to cycle through audio output modes: 2.0 (stereo), 5.1 (surround sound), or Auto (automatic detection). The Audio Format Indicator LEDs will show the current selection.

Figure 6: Multiple Switching Methods including front panel buttons and IR remote control.

Għajnuniet għall-Utent

• For best performance, use high-quality HDMI 2.0 cables, especially for 4K@60Hz signals.
• If you experience issues with video or audio, try power cycling all connected devices (splitter, sources, display) in sequence.
• Ensure your display and source devices support the desired resolution and refresh rate (e.g., 4K@60Hz) for optimal picture quality.

Issolvi l-problemi

If you encounter problems with your HDMI Splitter, please refer to the following common issues and solutions:

• L-ebda Ħruġ tal-Vidjo/Awdjo:
  • Check all HDMI cable connections to ensure they are secure.
  • Verify that the correct input source is selected on the splitter.
  • Kun żgur li l-wiri huwa ssettjat għall-input HDMI korrett.
  • Ipprova kejbil HDMI ieħor.
  • Power cycle all devices (splitter, sources, display).
• Sinjal li jteptep jew intermittenti:
  • Ensure HDMI cables are of high quality and rated for the resolution being used (e.g., HDMI 2.0 for 4K@60Hz).
  • Reduce cable length if possible.
  • Iċċekkja għal interferenza minn apparat elettroniku ieħor.
• No 5.1 Audio:
  • Ensure your source device is outputting 5.1 audio.
  • Set the splitter's audio mode to '5.1' or 'Auto'.
  • Verify your audio receiver/soundbar supports 5.1 audio and is correctly configured.
• Il-Kontroll mill-bogħod Mhux Jaħdem:
  • Ensure the remote has fresh batteries (requires 2x AAA batteries).
  • Point the remote directly at the IR receiver on the front of the splitter.
  • Remove any obstacles between the remote and the splitter.

Speċifikazzjonijiet

Manutenzjoni

To ensure the longevity and proper functioning of your HDMI Splitter, follow these maintenance guidelines:

• Keep the device in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Evita li tesponi l-apparat għal temperaturi jew umdità estremi.
• Naddaf l-apparat b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew aerosol.
• Do not attempt to open or modify the device, as this will void the warranty and could cause damage.
• Disconnect the power adapter if the device will not be used for an extended period.

Garanzija u Appoġġ

For technical support or warranty inquiries, please contact TESmart customer service using the information below:

• WhatsApp: +86 18473951878
• Email: 17680775530@163.com

Figure 7: TESmart Customer Service Contact Information.