Manwali+

Seeed Studio Seeed Studio XIAO ESP32C6

Seeed Studio XIAO ESP32C6 Mini Development Board Instruction Manual

Model: Seeed Studio XIAO ESP32C6

Brand: Seeed Studio

1. Matulview

The Seeed Studio XIAO ESP32C6 is a compact and powerful mini development board designed for a wide range of IoT and embedded applications. It integrates the Espressif ESP32-C6 SoC, featuring dual 32-bit RISC-V processors, offering high performance and low-power operation. This board provides comprehensive wireless connectivity including 2.4GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4), making it an ideal choice for smart home applications with Matter Native support.

Karatteristiċi ewlenin:

  • Ultra-compact Size: Measuring just 21mm x 17.5mm, it's perfect for space-constrained projects.
  • Proċessur Qawwi: Espressif ESP32-C6 SoC with dual 32-bit RISC-V processors (up to 160 MHz high-performance, up to 20 MHz low-power).
  • Konnettività Wireless Avvanzata: 2.4GHz WiFi 6, Bluetooth 5.3 (BLE), Bluetooth Mesh, Zigbee, and Thread (IEEE 802.15.4).
  • Matter Native Support: Ideal for smart home applications.
  • Periferali Sinjuri: 1x UART, 1x LP_UART, 1x IIC, 1x LP_IIC, 1x SPI, 11x GPIO (PWM), 7x ADC, 1x SDIO.
  • Memorja: 512KB SRAM & 4MB Flash.
  • Iċċarġjar tal-batterija: Integrated battery charge circuit.
  • Karatteristiċi tas-Sigurtà: Secure Boot, Flash Encryption, Trusted Execution Environment.
  • Integrazzjoni tas-Sħaba tal-IoT: Seamlessly integrates with platforms like ESP RainMaker, AWS IoT, and Microsoft Azure.
  • Development Friendly: Natively compatible with Arduino and ESP-IDF.
Seeed Studio XIAO ESP32C6 Mini DEV Board with key features listed
Figure 1: Seeed Studio XIAO ESP32C6 Mini Development Board highlighting its compact size, WiFi 6, BLE 5.3, Zigbee, Thread, Matter Native, Dual RISC-V Core, CE/FCC/TELEEC certifications, and battery charging capability.
Detailed features of Seeed Studio XIAO ESP32C6 including Matter Native, Open Source, Wi-Fi 6, Bluetooth 5, Zigbee, Thread, Arduino/ESP-IDF compatibility, Security, and Dual 32-bit RISC-V processors.
Figura 2: Karatteristika komprensiva fuqview of the XIAO ESP32C6, emphasizing its smart home capabilities, open-source nature, robust connectivity, and security features.
Vidjo 1: Wirja ta' dimostrazzjoni tal-prodottasing the XIAO ESP32C6's features, setup, and application in AI models.

2. Setup

2.1 Tneħħija tal-kaxxa u Spezzjoni Inizjali

Upon receiving your Seeed Studio XIAO ESP32C6, carefully unbox the development board. Inspect it for any visible damage. The package typically includes the XIAO ESP32C6 board and potentially additional headers or accessories depending on the bundle purchased.

Vista mill-qrib minn quddiem view of the Seeed Studio XIAO ESP32C6 development board.
Figura 3: Quddiem view of the XIAO ESP32C6 board, showing the USB-C port and main chip.

2.2 Konnessjoni tal-Bord

The XIAO ESP32C6 features a USB-C port for power and data communication. Connect the board to your computer using a compatible USB-C cable.

A hand connecting a USB-C cable to the Seeed Studio XIAO ESP32C6 board.
Figure 4: Connecting the USB-C cable to the XIAO ESP32C6 for power and data.

2.3 Soldering Headers (Optional)

For breadboard compatibility or custom wiring, you may need to solder pin headers to the board. Ensure proper soldering techniques are used to avoid damaging the board.

A soldering iron being used to attach pin headers to the Seeed Studio XIAO ESP32C6 board on a breadboard.
Figure 5: Soldering pin headers to the XIAO ESP32C6 for breadboard use.

2.4 Software Environment Setup

To program the XIAO ESP32C6, you will need to set up a development environment. The board is compatible with:

  • Arduino IDE: Install the ESP32 board package for Arduino.
  • ESP-IDF: Espressif IoT Development Framework for more advanced applications.
  • MicroPython/CircuitPython: For simplified programming.

Refer to the official Seeed Studio documentation or Espressif resources for detailed installation guides for your chosen environment.

3. It-tħaddim tal-Apparat

3.1 Pinout and Peripherals

Understanding the pinout is crucial for connecting external components and utilizing the board's various interfaces. The XIAO ESP32C6 provides a range of GPIOs, ADC, UART, IIC, and SPI pins.

Detailed pinout diagram for the Seeed Studio XIAO ESP32C6, showing labels for GPIO, UART, IIC, SPI, ADC, and power pins.
Figure 6: Pinout diagram of the XIAO ESP32C6, indicating the function of each pin.

3.2 Funzjonalità Bażika

The board includes several onboard components for basic interaction and status indication:

  • Reset Button (R): Resets the microcontroller.
  • Boot Button (B): Used to enter bootloader mode for flashing firmware.
  • Charge LED (PWR): Indicates power status and battery charging.
  • User LED (USER): Programmable LED for user feedback.
  • UFL Antenna Connector: For connecting an external antenna to improve wireless range.
  • Antenna abbord: Integrated antenna for wireless communication.
Diagram of the Seeed Studio XIAO ESP32C6 highlighting the Reset Button, Boot Button, Charge LED, User LED, UFL Antenna Connector, and Onboard Antenna.
Figure 7: Key components and indicators on the XIAO ESP32C6 board.

3.3 Programming and AI/IoT Applications

The XIAO ESP32C6 is highly versatile for various applications:

  • IoT Development: Utilize its WiFi 6, BLE 5.3, Zigbee, and Thread capabilities to build connected devices. Integrate with cloud platforms like ESP RainMaker, AWS IoT, and Microsoft Azure.
  • TinyML: Its powerful RISC-V processors are suitable for Tiny Machine Learning applications. Platforms like SenseCraft AI can be used for deploying AI models.
Screenshot of the SenseCraft AI platform showing options for emotion classification and face detection, indicating support for XIAO ESP32S3 Sense.
Figura 8: Eżample of AI model deployment using SenseCraft AI, demonstrating the board's capability for machine learning tasks.

4. Manutenzjoni

To ensure the longevity and optimal performance of your Seeed Studio XIAO ESP32C6, follow these maintenance guidelines:

  • Immaniġġja b'Kura: Il-bord fih komponenti elettroniċi sensittivi. Evita li twaqqagħha jew li tissottomettiha għal xokk fiżiku.
  • Żomm Niexef: Protect the board from moisture and liquids. Water damage can lead to irreversible malfunction.
  • Temperatura operattiva: Ensure the board operates within its specified working temperature range of -40°C to 85°C. Avoid extreme heat or cold.
  • Indafa: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Avoid using harsh chemicals.
  • Provvista tal-Enerġija: Always use a stable and appropriate power supply (5V via USB-C) to prevent damage.

5 Issolvi l-problemi

If you encounter issues with your XIAO ESP32C6, consider the following common troubleshooting steps:

  • Ebda Qawwa/LEDs Mitfija:
    • Check your USB-C cable and power source. Try a different cable or USB port.
    • Ensure the power LED (PWR) is illuminated when connected.
  • Ma nistax nittella' l-kodiċi:
    • Verify that the correct board and port are selected in your IDE (e.g., Arduino IDE).
    • Ensure necessary drivers are installed for the USB-to-serial converter.
    • Try holding down the Boot button while pressing and releasing the Reset button, then release the Boot button to enter bootloader mode before uploading.
    • Check for compilation errors in your code.
  • Kwistjonijiet ta' Konnettività Wireless:
    • Ensure your antenna (onboard or external UFL) is properly connected.
    • Check your code for correct WiFi, Bluetooth, Zigbee, or Thread configuration.
    • Verify network credentials (SSID, password) are correct.
    • Ensure your router/gateway supports the desired wireless standard (e.g., WiFi 6).
  • Periferali Mhux Jaħdem:
    • Double-check your wiring against the pinout diagram (Figure 6).
    • Verify that the correct libraries and code are used for the specific peripheral.
    • Ensure the peripheral itself is functional.

For more detailed troubleshooting or specific error messages, consult the official Seeed Studio documentation, community forums, or technical support.

6. Speċifikazzjonijiet

The following table outlines the key technical specifications of the Seeed Studio XIAO ESP32C6:

Attribut Valur
Numru tal-Mudell Seeed Studio XIAO ESP32C6
Demo Board Type RISC-V
Isem tad-Ditta studio taż-żerriegħa
Oriġini Iċ-Ċina kontinentali
Proċessur Espressif ESP32-C6 SoC (two 32-bit RISC-V processors, high-performance up to 160 MHz, low-power up to 20 MHz)
Konnettività bla fili Complete 2.4GHz Wi-Fi 6 subsystem, BLE: Bluetooth 5.0, Bluetooth mesh, Zigbee Thread IEEE 802.15.4
Interfaces 1x UART, 1x LP_UART, 1x IIC, 1x LP_IIC, 1x SPI, 11x GPIO (PWM), 7x ADC, 1x SDIO
On-chip Memory 512KB SRAM & 4MB Flash
Temperatura tax-Xogħol -40°C ~ 85°C
Batterija Inkluża Nru
Hign-konċernat Kimika Xejn
Dimensjonijiet 21mm x 17.5mm
Image showing the dimensions of the Seeed Studio XIAO ESP32C6 board, which are 21mm by 17.5mm.
Figure 9: Physical dimensions of the XIAO ESP32C6 board.
Comparison table of Seeed Studio XIAO series development boards, including XIAO SAMD21, RP2040, nRF52840, ESP32C3, ESP32S3, and ESP32C6, detailing their chip, architecture, RAM, Flash, built-in sensors, wireless capabilities, battery charge circuit, low power mode, and Arduino/CircuitPython/MicroPython support.
Figure 10: Comparison of various Seeed Studio XIAO series boards, highlighting the ESP32C6's features relative to other models.

7. Garanzija u Appoġġ

7.1 Politika ta' Ritorn

Dan il-prodott huwa eliġibbli għal ritorni bla ħlas fi żmien 90 jum mix-xiri. Jekk jogħġbok irreferi għall-politika ta' ritorn tal-bejjiegħ għal termini u kundizzjonijiet dettaljati.

7.2 Sigurtà u Privatezza

Your security and privacy are important. We do not share your personal details with any third parties without your consent. Your personal details are kept safe and secure.

7.3 Appoġġ Tekniku

For technical assistance, documentation, and community support, please visit the official Seeed Studio website or their dedicated forums. You can also find resources and project examples on platforms like Project Hub (hackster.io/seeed).

For specific inquiries related to your purchase, please contact the Seeedstudio AI Hardware Store directly.


Seeed Studio XIAO ESP32S3: Bord Żgħir għall-Iżvilupp tal-AI għat-Tagħlim Awtomatiku u l-IoT

Seeed Studio XIAO ESP32S3: Bord Żgħir għall-Iżvilupp tal-AI għat-Tagħlim Awtomatiku u l-IoT

0:34 • 1280×720 • dimostrazzjoni

Dokumenti Relatati - XIAO ESP32S3

Preview Seeed Studio XIAO ESP32C6 Product Details and Getting Started Guide
Detailed information about the Seeed Studio XIAO ESP32C6, a powerful IoT development board featuring ESP32-C6 SoC, dual RISC-V processors, Wi-Fi 6, Bluetooth 5.3, Zigbee, and Thread. Includes features, specifications, and a getting started guide.
Preview Gwida għad-Disinn tal-Pakkett u l-PCB tas-Serje Seeed Studio XIAO
Speċifikazzjonijiet tekniċi dettaljati u gwida għad-disinn tal-PCB għas-serje Seeed Studio XIAO ta' bordijiet tal-iżvilupp minjatura, inklużi SAMD21, RP2040, nRF52840, nRF52840 Sense, u ESP32C3. Il-karatteristiċi jinkludu pinouts, dimensjonijiet tal-mudell tal-art, u informazzjoni dwar l-integrazzjoni. Tgħallem dwar is-servizzi ta' Seeed Fusion għall-assemblaġġ tal-PCB.
Preview Modi ta' Konsum tal-Enerġija XIAO ESP32C3 u Riżultati tat-Test
Gwida komprensiva għall-modi tal-konsum tal-enerġija tal-mikrokontrollur Seeed Studio XIAO ESP32C3, li tiddeskrivi l-istati Attiv, Modem-sleep, Light-sleep, u Deep-sleep bir-riżultati tat-test u l-kmandi ta' konfigurazzjoni korrispondenti.
Preview Katalgu tas-Serje Seeed Studio Raspberry Pi® - Apparati Edge, Soluzzjonijiet IoT, u Personalizzazzjoni
Esplora l-Katalgu tas-Serje Seeed Studio Raspberry Pi®, li fih kontrolluri industrijali tat-tarf, HMIs, routers, u soluzzjonijiet ta' softwer għall-IoT u sistemi integrati. Skopri servizzi ta' personalizzazzjoni, prodotti approvati għall-bejjiegħa mill-ġdid, u speċifikazzjonijiet tekniċi komprensivi.
Preview Nibdew nużaw Seeed Studio Round Display għal XIAO
Gwida komprensiva dwar kif tissettja u tuża s-Seeed Studio Round Display għal XIAO, li tkopri t-tħejjija tal-ħardwer, l-installazzjoni tas-softwer, u l-użu bażiku għal din il-bord ta' espansjoni tat-touch screen ta' 1.28 pulzier.
Preview Skematiċi Tekniċi tal-Bord tal-Wiri tal-ePaper ta' Seeed Studio XIAO EE04
Skemi tekniċi dettaljati u dijagramma tal-blokki għas-Seeed Studio XIAO ePaper Display Board EE04. Tkopri l-ġestjoni tal-enerġija, l-integrazzjoni tal-mikrokontrollur, u l-interfaċċji tad-displej tal-e-ink.