LINGBAO K87 Three Mode Mechanical Keyboard User Manual

1. Introduzzjoni

The LINGBAO K87 is a versatile mechanical keyboard designed for both gaming and office use, featuring three connection modes: wired (Type-C), 2.4G wireless, and Bluetooth 5.0. It boasts a durable PBT keycap construction, hot-swappable switches, and a high-capacity battery for extended wireless use. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.

Image: LINGBAO K87 Series Keyboard Overview, highlighting its three connection modes: Type-C, 2.4G Wireless, and Bluetooth.

2. Kontenut tal-Pakkett

Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:

• 1 x LINGBAO K87 Mechanical Keyboard
• 1 x Għata għat-Trab
• 2 x Swiċċijiet żejda
• 1 x USB-A għal USB-C Cable
• 1 x Switch Puller & Keycap Puller
• 1 x Manwal għall-Utent
• 1 x Quick Start Card (included only for IP models)

Image: Detailed product specifications and the complete packing list.

3. Speċifikazzjonijiet

Image: Key features of the LINGBAO K87, including 10000mAh battery, three-mode connection, and Gasket structure.

4. Setup u Konnessjoni

The LINGBAO K87 keyboard supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth 5.0. You can switch between these modes easily.

4.1 Konnessjoni bil-Wajer (Tip Ċ)

1. Connect the provided USB-A to USB-C cable to the Type-C port on the keyboard.
2. Ipplaggja t-tarf USB-A tal-kejbil f'port USB disponibbli fuq il-kompjuter tiegħek.
3. It-tastiera tiġi rikonoxxuta awtomatikament u tkun lesta għall-użu.

4.2 Konnessjoni bla fili 2.4G

1. Locate the 2.4G wireless receiver (USB dongle), often magnetically stored within the keyboard.
2. Ipplaggja r-riċevitur mingħajr fili 2.4G f'port USB disponibbli fuq il-kompjuter tiegħek.
3. Switch the keyboard to 2.4G wireless mode (refer to the keyboard's mode switch, usually located on the back or side).
4. It-tastiera għandha tikkonnettja awtomatikament.

Image: Illustration of the 2.4G wireless receiver and its connection.

4.3 Konnessjoni Bluetooth 5.0

1. Switch the keyboard to Bluetooth mode (refer to the keyboard's mode switch).
2. On your device (laptop, tablet, smartphone), enable Bluetooth and search for new devices.
3. Select "LINGBAO K87" (or similar name) from the list of available devices to pair.
4. Segwi kwalunkwe prompts fuq l-iskrin biex tlesti l-proċess ta 'tqabbil.

Image: Visual representation of the keyboard's three connection modes and compatibility with various operating systems.

5. Istruzzjonijiet Operattivi

5.1 Effetti Backlight

The LINGBAO K87 features customizable RGB dazzling lights. You can switch between 17 different backlight effects using the FN key combined with specific group keys. Some of the available effects include:

• Mur mal-fluss
• Follow closely like a shadow
• Sinusoidal light wave
• Mitħna li ddur
• Colorful Falls
• Flowers bloom with wealth and honor
• Dreamlike Rainbow
• Mod tal-Logħba
• On the verge
• Modalità Agħlaq
• Strolling in the rain
• Normally bright mode
• Mod tan-nifs
• Snowfall without Traces
• Never-ending flow
• Key Ripple
• Stilel li jteptep

Image: A comprehensive list of 17 FN+Group key combinations for switching backlight effects.

5.2 Driver Software

The keyboard comes with a Lingbao Self-developed Driver (Windows only) that allows for hardware macro programming and music rhythm settings. Install the driver on your Windows PC to unlock advanced customization options.

Image: Details on the Lingbao Self-developed Driver for advanced keyboard customization.

5.3 Ġestjoni tal-batterija

The LINGBAO K87 is equipped with a large capacity lithium battery (10000 mAh for most versions, 8000 mAh for K87 Blue version). Ensure the keyboard is charged via the Type-C cable when the battery is low. The battery offers approximately 9000 hours of standby time and 600 hours of working time.

Image: Battery specifications including capacity, standby, and working hours.

6. Manutenzjoni

6.1 Tindif tat-Tastiera

• Uża l-għatu tat-trab provdut meta t-tastiera ma tkunx qed tintuża biex tevita l-akkumulazzjoni tat-trab.
• For general cleaning, use a soft, dry cloth.
• For deeper cleaning, you may carefully remove keycaps using the provided keycap puller and clean underneath with compressed air or a small brush.

6.2 Replacing Switches and Keycaps

The LINGBAO K87 features a full key hot-swap design, allowing you to easily replace mechanical switches without soldering. The PBT keycaps are also durable and can be removed for cleaning or customization.

1. Tneħħija tal-Għatu taċ-Ċwievet: Use the keycap puller to gently grip and pull up on the keycap you wish to remove.
2. Tneħħija tas-Swiċċ: Use the switch puller to carefully clamp the top and bottom clips of the switch, then gently pull the switch upwards.
3. Installazzjoni tal-Iswiċċ: Align the new switch's pins with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are not bent.
4. Installazzjoni tal-Keycap: Align the keycap with the switch stem and press down gently until it is secure.

Image: Detail of the single-key slotted PCB supporting full key hot-swap for easy switch replacement.

7 Issolvi l-problemi

• It-tastiera ma tirrispondix: Ensure the keyboard is properly connected (wired, 2.4G receiver, or Bluetooth paired). Check the battery level and charge if necessary. Try switching between connection modes.
• Iċ-ċwievet mhux qed jirreġistraw: If specific keys are not working, try removing and re-inserting the switch for that key, as the hot-swap feature allows for easy reseating. Ensure the switch pins are not bent.
• Problemi bil-konnessjoni mingħajr fili 2.4G: Kun żgur li r-riċevitur USB huwa mdaħħal sew u li t-tastiera tinsab fil-modalità 2.4G. Ipprova daħħal ir-riċevitur f'port USB differenti.
• Problemi bil-konnessjoni Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth pairing mode. Remove the keyboard from your device's paired list and try pairing again.
• Id-dawl ta' wara mhux qed jaħdem jew mhux korrett: Check if the backlight is turned off or set to a very dim setting. Cycle through the backlight effects using FN+Group keys.
• Driver not recognizing keyboard: Ensure the keyboard is connected via wired mode to install and use the driver. The driver is compatible with Windows only.

8. Għajnuniet għall-Utenti

• For optimal gaming performance, utilize the 1000Hz reporting rate in wired or 2.4G wireless mode.
• Experiment with different mechanical switches to find your preferred typing or gaming feel, thanks to the hot-swap feature.
• Regularly clean your keyboard, especially if you frequently swap keycaps or switches, to maintain performance and aesthetics.
• Ħu bil-quddiemtage of the dual-section tripod feet to adjust the keyboard's angle for ergonomic comfort.

Image: The dual-section tripod feet, allowing for adjustable keyboard tilt.

9. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija, appoġġ tekniku, jew mistoqsijiet dwar is-servizz, jekk jogħġbok irreferi għall-prodott uffiċjali website or contact the retailer where you purchased the LINGBAO K87 keyboard. Keep your proof of purchase for any warranty claims.