Aruba 48-Port Gigabit POE Three-Layer Management Switch

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Aruba 48-Port Gigabit POE Three-Layer Management Switch, Model 2930M JL321A RSVLC-1601. This high-performance switch is designed for enterprise networks, offering advanced management features and Power over Ethernet capabilities across all 48 Gigabit ports, with expansion options for 40G uplinks.

2. Informazzjoni dwar is-Sigurtà

Please read all safety warnings and instructions before installing or operating this equipment. Failure to do so may result in injury or damage to the product.

• Żgura li s-sors tal-enerġija jaqbel mal-voltage requirements of the switch.
• Do not operate the switch in wet or humid conditions.
• Żgura ertjar xieraq biex tevita xokk elettriku.
• Il-persunal kwalifikat biss għandu jwettaq l-installazzjoni u l-manutenzjoni.
• Żomm il-fetħiet tal-ventilazzjoni ċari biex tevita sħana żejda.

3. Kontenut tal-Pakkett

Ivverifika li l-pakkett tiegħek fih l-oġġetti li ġejjin:

• Aruba 48-Port Gigabit POE Three-Layer Management Switch (Model: 2930M JL321A RSVLC-1601)
• Korda tal-Enerġija
• Rackmount Kit (brackets, screws)
• Kejbil tal-Konsola (RJ-45 sa DB-9)
• Dokumentazzjoni (Gwida ta' Bidu Mgħaġġel, Informazzjoni dwar is-Sigurtà u r-Regolamentazzjoni)

4. Prodott Aktarview

The Aruba 2930M JL321A RSVLC-1601 is a robust network switch designed for high-density connectivity and advanced network management.

4.1. Panel ta 'Quddiem

Deskrizzjoni: This image shows the front panel of the Aruba 2930M JL321A switch. It features 48 Gigabit Ethernet ports, which can function as 10/100/1000BASE-T or SFP(G) ports. Also visible are LED indicators for Speed (Spd), Power over Ethernet (PoE), and User (Usr) modes, along with buttons for Reset and Clear, and Status LEDs. Dedicated Console and Aux Ports are present for management, alongside a Mgmt port.

Deskrizzjoni: This image provides another perspective of the front panel, emphasizing the arrangement of the 48 network ports and the various indicators and management interfaces.

4.2. Panel ta 'wara

Deskrizzjoni: The rear panel of the switch is shown, featuring bays for modular power supplies and fan modules, which are crucial for the device's power and cooling. Other rear connectors and ventilation are also visible.

4.3. Fuq View u Informazzjoni Regolatorja

Deskrizzjoni: A minn fuq għal isfel view of the switch chassis, providing an overall perspective of its physical dimensions and design.

Deskrizzjoni: This top view clearly displays the model number "RSVLC-1601" on the chassis, confirming the specific product variant.

Deskrizzjoni: A close-up of the regulatory label, which includes important compliance information, model numbers (JL321A and RSVLC-1601), and certifications such as CE, UL, and EAC. It also contains warnings regarding interference and proper usage.

4.4. Product Testing Environment

Deskrizzjoni: This video provides a glimpse into the factory environment where multiple network switches, including the Aruba 2930M JL321A, undergo testing and assembly, ensuring quality control before shipment.

5. Istruzzjonijiet ta' Setup

5.1. Immuntar tar-rack

1. Attach the provided rackmount brackets to the sides of the switch using the included screws.
2. Secure the switch into a standard 19-inch equipment rack using appropriate rack screws. Ensure the switch is level and adequately supported.

5.2. Konnessjoni tal-Enerġija

1. Connect the power cord to the power input on the rear of the switch.
2. Ipplaggja t-tarf l-ieħor tal-korda tal-enerġija f'sokit tal-enerġija AC ertjat.
3. Is-swiċċ jixgħel awtomatikament. Osserva l-LED tal-enerġija fuq il-pannell ta' quddiem.

5.3. Initial Console Connection

1. Connect the console cable (RJ-45 end) to the Console port on the front panel of the switch.
2. Connect the DB-9 end of the console cable to a serial port on your computer.
3. Ikkonfigura s-softwer tal-emulazzjoni tat-terminal tiegħek (eż., PuTTY, Tera Term) bis-settings li ġejjin:
   • Rata Baud: 9600
   • Bits tad-dejta: 8
   • Parità: Xejn
   • Stop bits: 1
   • Kontroll tal-fluss: Xejn
4. Power on the switch and follow the on-screen prompts for initial configuration.

5.4. Konnessjonijiet tan-Netwerk

1. Connect network devices (computers, servers, access points) to the Gigabit Ethernet ports (1-48) using standard Ethernet cables.
2. For uplink connections, use the SFP/SFP+ ports with appropriate transceivers and fiber optic cables, or use the dedicated 40G expansion slots if applicable.

6. Istruzzjonijiet Operattivi

6.1. Power On/Off

• Qawwa Mixgħul: Connect the power cord. The switch will automatically power on.
• Itfi: Disconnect the power cord from the AC outlet. For controlled shutdown, use the management interface to gracefully shut down the system before disconnecting power.

6.2. Indikaturi LED

Monitor the front panel LEDs for switch status:

• LED tal-qawwa: Jindika l-istatus tal-enerġija.
• LED tal-Istatus: Indicates overall system health.
• Spd (Speed) LED: Indicates the link speed of the corresponding port.
• LED PoE: Indicates Power over Ethernet status for the corresponding port.
• Usr (User) LED: User-configurable LED for specific functions.

6.3. Aċċess għall-Ġestjoni

The switch can be managed via:

• Port tal-Console: For initial setup and direct access.
• WebGUI bbażata fuq: Aċċess permezz ta ' web browser using the switch's IP address.
• Interfaċċja tal-Linja tal-Kmand (CLI): Access via Telnet, SSH, or the console port.

Refer to the Aruba documentation for detailed instructions on configuring network settings, VLANs, routing, and other advanced features.

7. Manutenzjoni

7.1. Tindif

• Ensure the switch is powered off and disconnected from all power sources before cleaning.
• Uża drapp ratba u niexfa biex tnaddaf il-barra tas-swiċċ.
• Tużax prodotti tat-tindif likwidi jew aerosol direttament fuq is-swiċċ.
• Żomm il-fetħiet tal-ventilazzjoni ħielsa mit-trab u l-fdalijiet.

7.2. Aġġornamenti tal-Firmware

Iċċekkja perjodikament il-manifattur websit għal aġġornamenti tal-firmware. Iż-żamma tal-firmware aġġornat tiżgura prestazzjoni ottimali, sigurtà, u aċċess għal karatteristiċi ġodda. Segwi l-istruzzjonijiet ipprovduti mal-pakkett tal-aġġornament tal-firmware bir-reqqa.

7.3. Konsiderazzjonijiet Ambjentali

Operate the switch within its specified temperature and humidity ranges. Avoid exposing the device to direct sunlight, excessive heat, or moisture.

8 Issolvi l-problemi

If you encounter issues with your switch, refer to the following common troubleshooting steps:

8.1. Ebda Qawwa

• Iċċekkja jekk il-korda tal-enerġija huwiex imqabbad sew kemm mas-swiċċ kif ukoll mas-sokit tal-enerġija.
• Ivverifika li l-iżbokk tad-dawl huwa funzjonali.
• Ensure the power supply unit (if modular) is correctly seated.
• Check the power LED on the front panel.

8.2. No Link/Connectivity

• Verify that the Ethernet cables are securely connected to both the switch port and the connected device.
• Check the link/activity LEDs on the switch port and the connected device.
• Kun żgur li l-apparat imqabbad ikun mixgħul u qed jaħdem sew.
• Try a different port or cable.
• Check port configuration (speed, duplex) via the management interface.

8.3. PoE Not Working

• Ensure the connected device is PoE-compatible.
• Check the PoE LED for the specific port.
• Verify that the switch's power budget is not exceeded.
• Check PoE settings for the port via the management interface.

8.4. Ma nistax naċċessa l-Interfaċċja tal-Ġestjoni

• Konsola: Ensure correct console cable connection and terminal emulation settings.
• Web/CLI (Network): Verify the switch's IP address and network connectivity. Ensure your computer is on the same subnet or has a route to the switch. Check firewall settings.

9. Speċifikazzjonijiet

10. Għajnuniet għall-Utenti

• For optimal performance and stability, ensure the switch is installed in a well-ventilated area with adequate airflow.
• Regularly back up your switch configuration to prevent data loss during unexpected events or firmware upgrades.
• Uża l- web-based GUI for easier configuration and monitoring, especially for users less familiar with command-line interfaces.

11. Garanzija u Appoġġ

This product comes with a standard manufacturer's warranty. For detailed warranty terms, technical support, and service requests, please refer to the official Aruba webis-sit jew ikkuntattja lir-rivenditur awtorizzat tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.