Introduzzjoni
The SmallRig Camera Battery Charger is designed for photographers requiring efficient and reliable power solutions. This dual-slot charger supports simultaneous charging of two batteries, ensuring your equipment is always ready. It is compatible with both original and third-party batteries for a wide range of camera models. Equipped with intelligent circuitry, the charger provides multiple safety protections to safeguard your batteries and device. Its compact design and versatile USB-C input make it an ideal companion for travel and on-location shoots.
Kontenut tal-Pakkett
- Camera Battery Charger x 1
- 60W USB-C to USB-C Cable (1m / 3.3ft) x 1
Kompatibilità
The SmallRig Camera Battery Charger is available in several models, each designed for specific battery types:
- ID 5489: Compatible with Sony NP-FZ100 batteries.
- ID 5490: Compatible with Canon LP-E6P, LP-E6NH, LP-E6N, and LP-E6 batteries.
- ID 5491: Compatible with Nikon EN-EL15c batteries.
- ID 5492: Compatible with Panasonic DMW-BLK22 batteries.
- ID 5493: Compatible with Sony NP-FW50 batteries.
Detailed compatibility lists for specific camera models:
- Compatible with Sony NP-FZ100: Alpha 6600, 9il, 7i kaw, 7ri kaw, 1, 7c, 7si kaw, 7riv, 7RV, 6700, 7CR, 7C II, 7 IV, 1 II, FX3, FX30, ZV-E1, ZV-E10 II.
- Compatible with Sony NP-FW50: Alpha 7 II, 6100, 6400, Alpha 7S II, 7R, 6500, 6000, 7, 5100, 6300, 7S, 7R II, ZV-E10, 5000, DSC-RX10M2, RX10M3, RX10, RX10M4, ILCE-QX1.
- Compatible with Canon LP-E6P: EOS 5D Mark II, 5D Mark III, 5D Mark IV, 6D, 60D, 60Da, 6DMark II, 7D, 7DMark II, 70D, 80D, 90D, XC10, XC15, 5DS, 5DSR, R, R5, R6, R5C, R7, R6 Mark II, R5 Mark II.
- Compatible with Nikon EN-EL15c: Z8, Z7II, Z7, Z6II, Z6, Z5, D850, D810, D810A, D780, D750, D610, D500, D7500, D7200, Zf, Z6i kawakl, D780, D750, D610, D500, D7500, D7200, Zf, Z6 i chuan l, Zr.
- Compatible with Panasonic DMW-BLK22: GH7, GH6, GH5 II, S9, G9 II, S5 IIX, S5 II, S5.
Setup
- Qabbad l-Enerġija: Insert the provided USB-C to USB-C cable into the charger's USB-C input port. Connect the other end of the cable to a compatible power adapter. It is recommended to use a power adapter with 22.5W or higher output for optimal performance. Note that 5V / 1A power adapters are not supported.
- Daħħal Batteriji: Carefully insert your camera batteries into the designated charging slots. The charging port features a spring structure to ensure a secure connection and prevent accidental disconnection.
Istruzzjonijiet Operattivi
Iċċarġjar tal-Batteriji
Once batteries are inserted and the charger is connected to power, the charging process begins automatically. The charger's dual-slot design allows for simultaneous charging. Two batteries can be fully charged in approximately 2 hours with an appropriate power adapter.
Iċċekkjar tal-Livell tal-Batterija
You can check the battery level at any time by single-clicking the button located on the charger.
Dwal Indikaturi LED
The charger features five LED indicators per channel to display battery status:
- Idle Mode (Battery level display when not charging):
- 0-10%: 1 red LED (steady)
- 10-20%: 1 white LED
- 20-40%: 2 white LEDs
- 40-60%: 3 white LEDs
- 60-80%: 4 white LEDs
- 80-100%: 5 white LEDs
- Modalità tal-Iċċarġjar: White LEDs flash to show the current charge level; steady white LEDs indicate the fully charged level.
- Modalità ta' Żball: The first LED of both channels will flash red and white alternately if the charger is overheated. Charging will automatically resume when the temperature returns to a safe range.
Mod ta 'Iċċarġjar Bil-mod
When using a 5V / 2.4A adapter, the charger will operate in a slow-charge mode. In this mode, the device will first charge the battery in Channel 1. Once Channel 1 is fully charged, it will automatically switch to Channel 2 to continue charging.
Manutenzjoni
- Żomm il-ċarġer nadif u niexef. Uża drapp artab u niexef biex timsaħ il-wiċċ.
- Evita li tesponi l-ċarġer għal temperaturi estremi, dawl tax-xemx dirett, jew umdità għolja.
- Aħżen il-ċarġer f'post frisk u niexef meta ma tkunx qed tuża.
- Do not attempt to disassemble or repair the charger yourself. Contact customer support if issues arise.
Issolvi l-problemi
- Il-ċarġer mhux mixgħul: Ensure the USB-C cable is securely connected to both the charger and a compatible power adapter. Verify the power adapter is functioning and provides at least 22.5W output (5V/1A adapters are not supported).
- Batteriji mhux qed jiċċarġjaw: Check that the batteries are inserted correctly into their respective slots. Confirm the power adapter meets the recommended specifications.
- Overheating warning (LEDs flashing red/white): If the charger detects overheating, it will temporarily stop charging and indicate this with flashing red and white LEDs. Disconnect the charger from power and allow it to cool down in a well-ventilated area. Charging will resume automatically once a safe temperature is reached.
- Iċċarġjar bil-mod: If charging seems slow, ensure you are using a power adapter with 22.5W or higher output. Using a 5V/2.4A adapter will result in slow charging, with Channel 1 prioritizing charging before Channel 2.
Speċifikazzjonijiet
| Karatteristika | Deskrizzjoni |
|---|---|
| Materjal(i) | PC + ABS |
| Input USB-C | 5V / 2.4A, 9V / 2A, 12V / 1.75A, 15V / 1.5A; 22.5W (Max) |
| Protokoll USB-C | PD3.0, QC2.0, QC3.0 |
| Rated Output (Per Channel) | 8.4V / 1A |
| Temperatura operattiva | 0°C sa 45°C / 32°F sa 113°F |
| Tip ta' Aċċessorji tal-Fotografija | Ċarġer tal-batterija |
| Elettriku | Nru |
| Pakkett | Iva |
| Oriġini | Iċ-Ċina kontinentali |
Product Dimensions & Weight (by Model ID)
| Mudell ID | Dimensjonijiet tal-Prodott (L x W x H) | Piż tal-Prodott |
|---|---|---|
| 5489 (for NP-FZ100) | 83.2 x 63.9 x 26.8mm / 3.3 x 2.5 x 1.1in | 45g ±5g / 1.8oz ±0.2oz |
| 5490 (for LP-E6P) | 88.9 x 69.2 x 26.0mm / 3.5 x 2.7 x 1.0in | 55g ±5g / 2oz ±0.2oz |
| 5491 (for EN-EL15c) | 89.1 x 68.3 x 23.9mm / 3.5 x 2.7 x 0.9in | 47g ±5g / 1.7oz ±0.2oz |
| 5492 (for DMW-BLK22) | 84.8 x 70.0 x 29.9mm / 3.3 x 2.8 x 1.2in | 57g ±5g / 2oz ±0.2oz |
| 5493 (for NP-FW50) | 72.9 x 57.1 x 22.5mm / 2.9 x 2.2 x 0.9in | 32g ±5g / 1.1oz ±0.2oz |
Għajnuniet għall-Utent
- For optimal charging speed and efficiency, always use a power adapter with an output of 22.5W or higher.
- If you notice slow charging, check your power adapter. A 5V/2.4A adapter will engage slow-charge mode, prioritizing one battery at a time.
- Keep an eye on the LED indicators for quick status checks, especially the red LED for critically low battery levels.
- The compact size makes it easy to carry; ensure batteries are securely seated to prevent accidental disconnections during transport.
Garanzija u Appoġġ
For detailed warranty information, technical support, or service inquiries, please refer to the official SmallRig webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.
