Manwal tal-Utent tal-Interfaċċja tal-Awdjo USB BOMGE BMG22

1. Introduzzjoni

Thank you for choosing the BOMGE BMG22 USB Audio Interface. This device is a high-performance 32-bit/192KHz sound card designed to provide exceptional audio quality for recording and streaming. Featuring 48V phantom power, a durable metal case, and versatile connectivity, it is an ideal solution for guitarists, singers, podcasters, and other audio enthusiasts.

This manual will guide you through the setup, operation, and maintenance of your BMG22 audio interface to ensure optimal performance and longevity.

2. Karatteristiċi ewlenin

• Awdjo b'Riżoluzzjoni Għolja: Supports up to 32-bit/192KHz sampling rate for pristine sound quality.
• Qawwa Phantom ta' 48V: Provides power for condenser microphones, ensuring clear and detailed vocal recordings.
• Inputs Doppju: Two combo XLR/TRS inputs for microphones, line-level instruments, or Hi-Z instruments like guitars.
• Monitoraġġ Dirett: Allows for zero-latency monitoring of your input signals.
• Funzjoni Loopback: Enables recording of computer audio simultaneously with your inputs, perfect for live streaming and podcasting.
• Kostruzzjoni Durabbli: Housed in a robust metal case for enhanced durability and shielding.
• Mħaddma USB: Flexible power options via USB, DC 5V adapter, or mobile power bank.
• Independent Volume Controls: Separate controls for main output and headphone monitoring.

3. Kontenut tal-Pakkett

Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:

• BOMGE BMG22 USB Audio Interface
• Cable USB
• Manwal għall-Utent

Note: An inbox power adapter is NOT included. The device can be powered via USB from a computer, a standard 5V DC USB charger, or a mobile power bank.

4. Panel Overview

Familiarize yourself with the controls and ports on your BMG22 audio interface.

Figure 4.1: Front and Rear Panel Details

Front Panel

1. Input 1 / Input 2 (Mic/Line/XLR Input Interface): Combo jacks for connecting microphones (XLR) or line-level/instrument signals (TRS).
2. Input 1/2 HI-Z Switch: Activates high impedance mode for direct connection of guitars or other instruments.
3. Gain 1 / Gain 2 Knobs: Adjust the input level for Input 1 and Input 2 respectively.
4. OL (Overload) Indicators: Lights up when the input signal is too high, indicating potential clipping.
5. Swiċċ tal-Monitor Dirett: Toggles direct monitoring on/off. When on, you hear your input signal directly without latency.
6. Indikatur tal-Enerġija: Jixgħel meta l-apparat ikun mixgħul.
7. +48V Swiċċ: Activates 48V phantom power for condenser microphones connected to Input 1.
8. Buttuna tal-Ħruġ: Controls the main output volume.
9. Jack tal-headphone: Output stereo ta '3.5mm għall-headphones.
10. Headphone Volume Adjustment: Controls the volume for the headphone output.

Panel ta' wara

11. Port USB: Connects to your computer for data transfer and power.
12. Swiċċ tas-Sors tal-Enerġija: Selects between USB power or external DC 5V power.
13. Input DC 5V: For connecting an external 5V DC power adapter (not included).
14. Swiċċ tal-Loopback: Activates the loopback function.
15. MIC 1 48V Switch: Activates 48V phantom power for Input 1. (Note: This is a duplicate label from the front panel image, but refers to the same function).
16. Outputs 2(R) / 1(L): RCA outputs for connecting to active speakers or an ampaktar ħaj.

5. Gwida ta' Setup

5.1 It-Tħaddim tal-Apparat

The BMG22 can be powered in several ways:

• Via Computer USB: Connect the USB cable from the BMG22's USB port to a USB port on your computer. Ensure the 'Power Source' switch on the rear panel is set to 'USB'.
• Via DC 5V Adapter: Connect a standard 5V DC power adapter (not included) to the 'DC 5V' input. Ensure the 'Power Source' switch on the rear panel is set to 'DC 5V'.
• Via Mobile Power Bank: Connect a mobile power bank to the 'DC 5V' input. Ensure the 'Power Source' switch on the rear panel is set to 'DC 5V'.

Figure 5.1: Multiple Power Supply Methods

5.2 Konnessjoni ma 'Kompjuter

Connect the BMG22 to your computer using the provided USB cable. The device is plug-and-play for most operating systems (Windows, macOS) and should be recognized automatically. No special drivers are typically required.

Figure 5.2: Connecting to Computer and Speakers

5.3 Connecting Input Devices (Microphones, Instruments)

Use the front panel's combo jacks (Input 1 and Input 2) to connect your audio sources.

• Mikrofoni: Connect XLR microphones directly. For condenser microphones, ensure the +48V switch is engaged (see Section 6.2).
• Keyboards/Line-level Instruments: Connect using 1/4-inch TRS cables.
• Kitarri/Bassi: Connect using 1/4-inch TS cables. Engage the 'HI-Z' switch for the corresponding input to optimize the impedance for instruments.

Figure 5.3: Connecting Microphones, Instruments, and Headphones

5.4 Connecting Output Devices (Speakers, Headphones)

• Kelliema: Connect your active speakers to the RCA 'Outputs 2(R) / 1(L)' on the rear panel.
• Headphones: Plug your headphones into the 3.5mm 'Headphone Jack' on the front panel.

6. Operazzjoni

6.1 Aġġustament tal-Qligħ tad-Dħul

Use the 'Gain 1' and 'Gain 2' knobs to set the input level for your connected microphones or instruments. Observe the 'OL' (Overload) indicators. If an 'OL' light flashes, reduce the gain to prevent clipping and distortion. Aim for a strong signal without the 'OL' light illuminating consistently.

6.2 Activating 48V Phantom Power

If you are using a condenser microphone, you will need to activate 48V phantom power. Press the '+48V' switch on the front panel. The indicator light will illuminate, providing power to Input 1. Ensure dynamic microphones do not have phantom power applied unless specifically designed for it.

Figure 6.1: Using 48V Phantom Power

6.3 Monitoraġġ Dirett

Engage the 'Direct Monitor' switch to hear your input signal directly through your headphones or speakers without any latency from your computer. This is crucial for recording to ensure accurate timing and performance.

6.4 Loopback Function

The 'Loopback' switch on the rear panel allows you to record or stream audio playing on your computer simultaneously with your microphone or instrument inputs. This is particularly useful for podcasts, live streams, or online lessons where you need to capture both your voice and computer audio (e.g., background music, video sound).

6.5 Output Volume Control

• Buttuna tal-Ħruġ: Adjusts the overall volume level sent to your connected speakers via the RCA outputs.
• Headphone Volume Adjustment: Controls the volume for your headphones.

7. Speċifikazzjonijiet

8 Issolvi l-problemi

• Ebda Ħsejjes tal-Ħsejjes:
  • Iċċekkja l-konnessjonijiet kollha tal-kejbil (USB, speakers, headphones).
  • Ensure the BMG22 is selected as the default audio output device in your computer's sound settings.
  • Verify the 'Output' and 'Headphone Volume' knobs are turned up.
  • Confirm the 'Power' indicator is lit.
• Ebda Sinjal tad-Dħul:
  • Check microphone/instrument cable connections.
  • Ensure the 'Gain' knob for the active input is turned up.
  • If using a condenser mic, verify +48V phantom power is engaged.
  • If using a guitar, ensure the 'HI-Z' switch is engaged for the correct input.
  • Check your computer's sound settings to ensure the BMG22 is selected as the input device.
• Distorted/Clipping Sound:
  • Reduce the 'Gain' knob for the input. The 'OL' indicator should not light up consistently.
  • Check the input level in your recording software.
• Latency during Recording:
  • Engage the 'Direct Monitor' switch on the BMG22.
  • Adjust buffer size settings in your Digital Audio Workstation (DAW) software.

9. Għajnuniet għall-Utenti

• Gwadan Staging: Always set your input gain levels carefully. Start with the gain low and gradually increase it until the 'OL' indicator flashes only on the loudest peaks, then back it off slightly. This ensures a strong signal without distortion.
• Setup tas-Software: After connecting the BMG22 to your computer, ensure it is selected as both the input and output device in your operating system's sound settings and within your recording software (DAW).
• Kwalità tal-Kejbil: Use high-quality XLR and TRS cables to minimize noise and ensure optimal signal transfer.
• Experiment with Loopback: The loopback function is powerful for streaming. Practice using it to balance your microphone audio with computer playback for a professional sound.

10. Manutenzjoni

• Tindif: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
• Ħażna: When not in use, store the BMG22 in a cool, dry place away from direct sunlight and extreme temperatures.
• Kura tal-Cable: Avoid bending cables sharply or placing heavy objects on them to prevent damage.

11. Garanzija u Appoġġ

Your BOMGE BMG22 USB Audio Interface is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the BOMGE customer service department.