HUPEJOS V8Pro-4CH 4K Dash Cam User Manual

1. Introduzzjoni u Prodott Fuqview

The HUPEJOS V8Pro-4CH is a sophisticated 4-channel dash camera designed to enhance driving safety and record comprehensive footage. It features a 360° field of view, AI Driver Monitoring System (DMS), built-in WiFi and GPS, advanced night vision, voice control, and a 24-hour parking mode (requires separate hardwire kit).

This manual provides detailed instructions for the proper installation, operation, and maintenance of your dash cam. Please read it carefully before use.

Karatteristiċi ewlenin:

• 4-Channel 360° Coverage: Ultra-wide-angle 150°x4 lenses, adjustable for full vehicle protection.
• AI Driver Monitoring System (DMS): Detects fatigue, distraction, yawning, driver absence, phone calls, and smoking to improve driving safety.
• Reġistrazzjoni f'Loop & G-Sensor: Jikteb awtomatikament fuq foo qadimtage and locks important event videos upon collision.
• Built-in 5GHz Wi-Fi & GPS: Enables real-time video viewing via app, accurate location/speed tracking, and route playback.
• Super Night Vision & CPL Filter: Provides clear images in low-light conditions and reduces glare for enhanced clarity.
• Kontroll tal-Vuċi: Hands-free operation with English voice commands for various functions.
• Monitoraġġ tal-Parkeġġ 24 Siegħa: Continuous surveillance recording when parked (requires separate hardwire kit).

Prodott Overview Vidjow:

Dan il-filmat jipprovdi viżwali fuqview of the HUPEJOS V8Pro-4CH Dash Cam and its main features.

2. Informazzjoni dwar is-Sigurtà

Biex tevita korriment lilek innifsek jew lil ħaddieħor, jew ħsara lit-tagħmir tiegħek, aqra l-informazzjoni kollha dwar is-sigurtà qabel tuża.

Twissijiet:

• Nuqqas ta 'konformità mat-twissijiet u r-regolamenti tas-sigurtà jista' jirriżulta f'korriment serju jew mewt.
• The HUPEJOS Dash Cam is not intended to be touched, modified, or calibrated while operating a vehicle.
• Tużax kurduni jew plakek tad-dawl bil-ħsara, jew sokits elettriċi maħlula.
• Tmissx il-ċarġer tal-karozza bl-idejn imxarrbin jew skonnettja l-ċarġer billi tiġbed il-korda.
• Twaqqax il-ċarġer jew l-apparat, jew tissuġġettahom għall-impatt.
• Qatt tfarrak jew ttaqqab l-apparat.
• Qatt tarmi l-apparat fin-nar.
• Never place the device in or on heating devices. The device may explode if overheated.
• Evita li tesponi l-apparat għal pressjoni esterna għolja, li tista 'twassal għal short circuit intern u sħana żejda.
• Avoid exposing your device to excessive cold or heat. Extreme temperatures can damage the device.
• Tħallix lit-tfal jew l-annimali jigdmu jew jomogħdu l-apparat.
• Qatt tuża ċarġer bil-ħsara.

Attenzjonijiet:

• In-nuqqas ta' konformità mal-prekawzjonijiet u r-regolamenti tas-sigurtà jista' jirriżulta fi ħsara lill-proprjetà, korriment serju jew mewt.
• Do not use your device near other electronic devices that emit radio signals, as this may cause malfunction.
• Tesponix l-apparat għal duħħan qawwi jew dħaħen.
• If you notice strange smells or sounds, or see smoke/liquid, stop using the device immediately and contact support.
• Do not operate the controls of this product while driving.
• Ensure the dash cam is placed in a location that does not obstruct the driver's view.
• Always keep the camera lens clean and ensure it is not blocked.
• The device is recommended for use and storage within a temperature range of -22°F to 140°F (-30°C to +60°C) and humidity of 10% to 80%.
• Jekk it-tagħmir tiegħek jisħon iżżejjed, ħallih jiksaħ qabel l-użu.
• Tippruvax iżżarma, tiswija jew tibdel it-tagħmir tiegħek.
• Clean your device and charger by wiping with a soft, moist cloth or eraser. Do not use chemicals or detergents.

3. Nibdew

X'hemm fil-Kaxxa:

• HUPEJOS V8Pro Dash Cam
• Rear camera with 19.6ft Rear Camera Cable
• Filtru CPL
• Ċarġer tal-Karozza b'Cable USB tat-Tip C
• Għodda tal-Wiring tal-Karozza
• Manwal għall-Utent
• Film elettrostatiku għal 3M Mount
• SD Memory Card (128G or 256G, as per standard)
• Muntaturi Adeżivi 3M

Setup Inizjali:

1. Iċċekkja Aċċessorji: Before installation, ensure all products and accessories are correct and complete.
2. Format SD Card: To ensure optimal device performance, format the SD card before first use.
3. Power Off for Accessory Changes: During installation, do not insert the car key into the power supply, and do not insert or remove accessories like the SD card or rear camera while the dash cam is powered on. Perform these actions only when power is turned off.
4. Qawwa Awtomatika Mixgħul: When the car key is plugged into the vehicle, the dash cam will automatically turn on. Verify that the power on/off function and camera display are normal.
5. SD Card Removal for Downloads: If you need to download recorded videos and images, turn off the camera first before removing the SD card.
6. SD Card Type: Use a U3 high-speed card (recommended capacity 32GB-256GB). Using a card lower than U3 may cause video stutter, black screen, or recording/playback issues.
7. App Connection Tip: For some mobile phone models, if the TsCam APP cannot connect to the preview, try turning on airplane mode on your mobile phone.

4. Installazzjoni

4.1 Main Body Installation

1. Test tal-Bank: Start the vehicle generator and perform a bench test. Connect the car charger to the cigarette lighter port and the dash cam, connect the rear camera, and insert the SD card to ensure the dash cam functions normally before official installation.
2. Post tal-Immuntar: Find a suitable spot on your windshield. Wipe the pre-assembled location with a clean wipe. Peel off the electrostatic sticker from the cellophane and transfer it to the desired place. Eliminate any air bubbles. It is recommended to install the back camera after standing still for half an hour to allow the static stickers to strengthen.
3. DMS Camera Placement: For AI car cameras with DMS (Driver Monitoring System), the main body needs to be mounted on the driver's side of the main cab or right in the middle of the front windshield to ensure the driver's face is recognized when using DMS.

4.2 In-Car Rear Camera Installation

1. Ipprepara wiċċ: Use a clean cloth to wipe the rear windshield where the rear camera will be installed.
2. Applika Stiker Elettrostatiku: Peel off the electrostatic sticker from the cellophane and transfer it to the desired place.
3. Kamera Sikura: Eliminate air bubbles. It is recommended to install the rear camera after standing still for half an hour to allow the static stickers to strengthen.
4. Nota: The rear camera lens can be rotated 180° in front/back and left/right directions. It is not waterproof, so it is best installed inside the car, preferably on the rear windshield.

4.3 Wajers

Insert the power cord along the gaps between the front windshield and the ceiling, between the car body and the ceiling on the side of the passenger seat, and between the rear seats and the ceiling.

Diagram showing how to route the power cable and connect the rear camera.

4.4 Hardwire Kit Installation (Optional for Parking Mode)

A hardwire kit is required for the 24-hour parking mode. If parking mode is desired, this kit must be purchased separately.

Hardwire Kit Features:

• Batterija Baxxa Voltage Protezzjoni
• Qawwa ta 'Input Multi
• Kompatibilità Universali
• Tul: 11.5ft

Istruzzjonijiet tal-Wiring:

WARNING: Incorrect connection may disable Voltage Protezzjoni u ħsara lill-karozza tiegħek.

• Wajer aħmar (ACC): Connects to a power source that is only active when the car key is on.
• Yellow wire (B+): Connects to a constant power source (always has power).
• Black wire (Ground): Connects to any grounded (negative) screw.

POP-UP: The fuse box panel is typically located on the driver's side dashboard. You can cut the head of the wires and connect them directly to your fuse if the fuses are small.

Noti ta' Installazzjoni:

Particular Wrong Connection:

If B+ and Ground are connected to 'Always On', the camera will run Parking Mode constantly, draining your car battery. Please check if your camera is working after 15 minutes your car is off (especially for cars with delayed power-off functions).

5. Operazzjoni u Settings

5.1 Tixgħel/Jitfi

• Tixgħel: With the camera off, insert the SD card into the card slot with the label facing the back of your camera. Short press the power button to turn on your V8Pro.
• Itfi: Agħfas u żomm il-buttuna tal-qawwa għal 3 sekondi biex titfiha.

5.2 Dash Cam Display Interface

In video recording mode, short press the menu button to enter the main interface. The interface provides access to:

• Dash Cam: Driving recorder mode
• Daqq: Playback video or picture mode
• Kontroll tal-Vuċi: Voice control function setting
• Dashboard: Modalità tas-sewqan tad-dashboard
• Settings: Issettjar tas-sistema
• DMS: Driver Monitoring System Setting

Visual representation of the dash cam's main interface and menu options.

5.3 Kontroll tal-Vuċi

Press the OK button to turn voice control on or off. Once activated, voice command instructions will pop up. Press any button to return to the main interface. The machine will respond to the following English voice commands:

• Ixgħel l-Iskrin
• Lock il-Vidjo
• Itfi l-Iskrin
• Ħu Ritratt
• Bidu tal-vidjo
• Video Stop
• Uri Front Camera
• Uri Kamera ta' wara
• Show Both Camera
• Ixgħel l-Awdjo
• Itfi l-Awdjo
• Ixgħel il-WiFi
• Itfi l-WiFi

Nota: Voice commands only support English wake-up.

5.4 SD Card Record Files

The dash cam organizes recorded files into specific categories:

• SD Card Name: Ħażna file
• Avveniment: Video files locked due to emergency or manual action.
• Normali: Conventional driving video files.
• Ritratt: Snapshots.
• Parkeġġ: Video files recorded by parking surveillance cameras.
• Aqsam: Reserved for future functions.

Secondary Folder Structure:

• A: Front shots (video/pictures)
• B: Left shots (video/pictures)
• C: Right shots (video/pictures)
• D: Rear shot (video/picture)

5.5 Playback Operations and Settings

Button Operation During Playback:

• Buttuna OK: Agħfas qasir biex tikkonferma.
• Buttuna 'l fuq: Short press to select the previous function/file.
• Buttuna 'l isfel: Short press to select the next function/file.
• Buttuna tal-menu: Long press to switch between recording mode/playback mode.
• Buttuna tal-Qawwa: Short press to return to the previous screen.

Daqq File Preview Skrin:

• Video/Picture Switching: Long press the menu button to switch between video file preview u stampa file preview.
• Aċċess għall-Menu: Press and hold the menu button to enter playback menu mode.
• Navigazzjoni: Short press Up/Down buttons to view previous/next video/picture.
• Exit Playback: Short press the power button or long press the menu button twice to return to video recording mode.

Settings tal-daqq:

• Volum: Adjustable from 0-100 (Default: 50).
• Tip ta' Video: Normal/Parking mode/Emergency.
• Kamera: A/B/C/D (selects which camera's footage to view).
• Ħassar: Ħassar wieħed jew kollha files.
• Ipproteġi: Protects selected files/deprotects magħżula files/Protets kollha files/deprotects kollha files.

5.6 DMS (Driver Monitoring System)

The DMS monitors driver behavior and status. When key information of the driver's face is blocked, the algorithm may not detect it normally.

• DMS ON/OFF: Select the speed needed to activate or deactivate the DMS feature. The dash cam reboots when switching left/right camera.
• Kamera: Select left or right camera based on vehicle's main cab direction.

When the following functions are enabled, a corresponding alarm will sound:

• Eyes Closing: Alarm if driver's eyes are closed for >3 seconds (fatigue driving). Detection range: head yaw angle deviation left/right 25 degrees.
• Yawning: Alarm if driver yawns for >3 seconds (fatigue driving).
• Tipjip: Alarm if driver continuously smokes for >3 seconds.
• Telefonata: Alarm if driver makes a phone call for >3 seconds.
• Distrazzjoni: Alarm if driver's head deviation (left/right >45°) lasts for >3 seconds.
• Driver Absence: Alarm if face cannot be monitored for >3 seconds.

5.7 Dashboard Driving Mode

When driving speed exceeds 50mph or 80km/h, the speed display font will turn red as a safety tip. GPS positioning is required for dashboard speed and direction functions to work. If there is no GPS signal (e.g., underground garage) or the machine is working outdoors for the first time, these functions may not be active for up to 2 minutes.

5.8 Menu tas-Settings

Access the settings menu to configure various parameters of your dash cam:

• G-sensor: Sensitivity setting (OFF/high/medium low - default).
• Parkeġġ: Collision detection for parking mode (High/medium/low sensitivity).
• Lingwa: English, Español, Português, Русский, 简体中文, 繁體中文, Deutsch, Italiano, Français, 日本語, 한국어, Türkiye, Thai, Nederlands.
• Screen Saver: Off (default), 1 minute, 3 minutes.
• Settings tal-Arloġġ: Set date and time (updates automatically with GPS).
• Karta tal-Format: Option to format the memory card.
• Irrisettja: Irrestawra l-issettjar tal-fabbrika.
• GPS: ON (default)/OFF.
• Status tal-GPS: Displays GPS satellite CN value.
• Aġġusta Veloċità: Adjusts speed display (+12 to -12).
• Unità tal-veloċità: off/km/h/mph (default value).
• Żona tal-Ħin: Default -5:00.
• Sajf tas-Sajf: On/Off (Default).
• Wi-Fi: ON/OFF (default). Frequency: 2.4G/5G (default). Note: If your phone doesn't support 5G, switch to 2.4G.
• Modalità tal-Film: 3K+1080Px3 (default)/2K+1080Px3.
• Led IR: On/Off/Auto (Default). Automatically opens in dark scenes, closes in bright scenes.

6. Mobile Phone APP Connection

The HUPEJOS dash cam can be connected to a mobile app for live viewing, video playback, and downloads.

6.1 Niżżel l-APP

Fittex għal 'TsCam', 'WEcam', or 'Roadcam' in your device's app store. You can also scan the QR codes below:

TsCam App (Android/iOS)

Nota: If you cannot download the 'TsCam' APP due to updates, contact support@hupejos.com for assistance.

6.2 Operazzjoni tal-APP

After successful WiFi connection, open the app and click "connect". The app will automatically connect to the camera and display real-time recording.

• Live View: Watch your dashcam's live video feed (within 10 feet).
• Daqq tal-Vidjo: Watch recorded videos stored on your dashcam on your smartphone. (Note: Video and picture pixels in TsCam APP are compressed. For clearer information, download the picture/video or use the SD card on a computer.)
• Niżżel il-vidjo: Select and download videos or pictures from the SD card browsing interface or playback area.

Medda WiFi: The WiFi range of V8Pro is 6-7 meters from the dash cam. It is not a cloud dash cam, so remote viewing beyond this range is not possible.

7. Konnessjoni WiFi

When WiFi is turned on, the display screen will show the ID and password.

Passi ta' Konnessjoni:

1. Ensure the WiFi function on the dash cam is ON.
2. Open your phone's WiFi settings list.
3. Select the WiFi name (SSID: HUPEJOS-V8Pro-***).
4. Enter the password (PWD: 12345678) to connect.
5. Open the TsCam APP and click the "Connect" button to use.

Troubleshooting WiFi Connection:

• Before connecting, ensure your smartphone's WiFi is enabled.
• If WiFi fails to connect or is interrupted, turn off your phone's cellular network or switch to airplane mode and reconnect.
• If you forget the WiFi password, you can restore the device to default settings, which will also reset the WiFi password to 12345678.

8. APP GPS Video Playback

Biex view GPS tracks in real-time preview on the APP:

1. The mobile phone needs to have mobile data traffic enabled.
2. Apple iPhones use the phone's built-in map to access GPS tracks. If the map is uninstalled, it needs to be reinstalled.
3. Android phones need to cache offline maps. You can do this by opening TsCam, clicking About, and selecting offline map to cache.

After entering the App's real-time preview, tista 'twettaq l-operazzjonijiet li ġejjin:

• Video Preview: After connecting to the camera, enter the real-time preview page. Click the full-screen icon or place the phone horizontally for full-screen mode. Use the window switch icon to switch between front, rear, and cabin video windows (for multi-channel dash cams).
• Daqq tal-Vidjo: View vidjo u ritratt files recorded on the SD card directly in the app.
• Niżżel il-vidjo: Select and download videos or pictures from the SD card browsing interface or video playback area. Downloaded videos can be played from the local file sezzjoni tal-interface tal-app.

9. PC GPS Video Playback

9.1 Funzjoni tal-GPS

• The video interface indicates GPS status: a flashing icon means GPS is not positioned, a solid icon means GPS positioning is successful.
• The system time will synchronize after successful GPS positioning (according to the time zone set in the menu).
• In the "GPS status" of general settings, you can view il-valur CN tal-GPS f'ħin reali.

9.2 Install GXPlayer

• MAC System: Search "GXPlayer" on the Apple App Store to install.
• Sistema Windows: The dash cam's memory card will automatically generate the GXPlayer installation file. Find "GXplayer" in the file, click download, and install.

9.3 Use GXPlayer

After installation, open GXPlayer to:

• Import video files after GPS positioning.
• Show travel track.
• Show vehicle position during driving.
• Display real-time speed.
• Access general settings for additional features.

10. Speċifikazzjonijiet

11. Manutenzjoni

• Do not directly plug and unplug the cable or SD card unless the camera is turned off.
• While we do not encourage connecting your camera with other hardwire kits, if you do, ensure they are lower than 6V and higher than 2.5A.
• It is normal for the camera to be warm during operation. Excessive exposure to heat from the sun may cause damage not covered under the 1-year warranty.

12 Issolvi l-problemi

12.1 WiFi Connection Issues

• Preparazzjoni tal-Konnessjoni: Ensure mobile data/VPN is off. Be within 16ft of the V8Pro. Only one device connection is allowed.
• Connection Notice: Il-password tal-WiFi awtomatika hija 12345678.

12.2 Won't Enter Parking Mode

• A hardwire kit is needed for parking mode.
• If the screen prompts "ACC disconnected", check the hardwire kit connection.
• If the blue light is on and the red light flashes, it indicates a parking mode issue.

12.3 Camera Always On After Car Turned Off

• This usually indicates incorrect wiring of the Red and Yellow wires in the hardwire kit.
• Ensure the Red wire is connected to the ignition fuse.

12.4 Is-sħana żejda

• The camera should operate within -22°F to 140°F (-30°C to +60°C).

12.5 Received Dead Camera

• Use a USB cable to connect your camera to a computer and check if the screen turns on.

12.6 Ultimate Solutions for Various Issues

• If the camera doesn't power on, unplug the SD card, use a pin to press the Reset button at the bottom of the camera, then reconnect.
• Ensure you are using the original car charger. If not, replace it.
• Remove the rear camera, SD card, and then reinsert them into the dash cam in sequence to check for short-circuit issues.
• Verify your SD card is U3 Class10. If not, replace it.
• If issues persist, use your personal USB charger. Check if the car charger is short-circuited.
• Download the latest firmware to upgrade your dash cam.
• If the above methods do not resolve your problem, contact HUPEJOS support.

13. User Tips & FAQ

13.1 Ġestjoni tal-Kard SD

• The dash cam supports standard SD cards up to 256GB.
• Always use Class 10, U3 (UHS-1) speed or above (SAMSUNG or LEXAR High Endurance recommended).
• Format new SD cards on the Dash Cam before use.
• The dash cam will prompt for formatting on the 1st and 15th of every month; this is a reminder and not mandatory if the card is working correctly.
• Memory cards can deteriorate after repeated overwriting cycles; this may affect file iffrankar.

13.2 WiFi Connection & App Usage

• If WiFi connection is interrupted, turn off your phone's cellular network or switch to Airplane Mode and reconnect.
• If the app is not running or cannot connect, ensure you have the latest version of 'TsCam', 'WEcam', or 'Roadcam' installed.
• The WiFi range is 6-7 meters. This is not a cloud dash cam, so remote viewing beyond this range is not possible.
• To change the WiFi password: Connect to the dash cam's WiFi, open the TsCam app, go to "Recorder settings" > "Device settings" > "DVR WiFi password", and enter the new password.

13.3 Parking Mode & Hardwire Kit

• 24-hour parking mode requires a separate hardwire kit or radar hardwire kit.
• If parking mode doesn't activate or the camera records all night, check the hardwire kit wiring. Incorrect wiring (especially red and yellow lines) or a disconnected red line can cause issues. Refer to the hardwire kit installation video for guidance.
• Ensure the installed radar (if applicable) is perpendicular to the ground for accurate sensitivity measurements.

13.4 Display & Recording

• If the camera screen flickers, it might be due to infrared light from the front or rear camera of the phone aimed at the in-car lens. This is normal.
• When the rear camera is not connected, the front resolution automatically switches to 4K. When the rear camera is connected, the front resolution will be 2K or 3K.
• WiFi is turned off by default. To use it, long press the OK button or enable it in settings.

14. Garanzija u Appoġġ

Garanzija:

The HUPEJOS V8Pro-4CH Dash Cam comes with a 12-month warranty. You can extend this warranty to 24 months by visiting www.hupejos.com/?feature=warranty.

Appoġġ għall-Klijent:

For any questions regarding your product, missing accessories, or technical support, please contact us:

• Email: support@hupejos.com
• Responses are typically provided within 12-24 hours.
• We offer 7x24 hours of technical support.

Your feedback is important to us as we continuously strive to improve our products and user experience.

Scan for email and official site.