Manwal tal-Utent tal-BUTURE BC02 5500A Car Jump Starter b'Kompressur tal-Ajru ta' 150PSI

Introduzzjoni

Thank you for choosing the BUTURE BC02 Car Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a portable air compressor, a power bank, and an emergency light, making it an essential tool for any vehicle owner. Please read this manual carefully before use to ensure safe and optimal operation.

Figure 1: BUTURE BC02 Jump Starter and included accessories.

Informazzjoni Importanti dwar is-Sigurtà

• Dejjem ilbes protezzjoni għall-għajnejn meta taħdem bil-batteriji.
• Do not allow the jump starter clamps to touch each other once connected to the device.
• Taqbiżx il-batterija ffriżata.
• Kun żgur li l-apparat ikun iċċarġjat kompletament qabel l-użu għal prestazzjoni ottimali.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Tesponix l-apparat għal temperaturi jew umdità estremi.
• Jekk l-apparat jisħon iżżejjed waqt l-użu, waqqaf l-operazzjoni immedjatament.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• BUTURE BC02 Jump Starter with Air Compressor
• Smart Battery Clamps
• Manka tal-Ajru
• Nozzle Adapters (for various inflatables)
• Cable tal-Iċċarġjar tal-USB-C
• Manwal għall-Utent
• Borża tal-Ħażna

Setup u Iċċarġjar Inizjali

Before first use, ensure the BUTURE BC02 is fully charged. The device features a large LED screen that displays the battery level.

1. Connect the provided USB-C charging cable to the USB-C input port on the device.
2. Connect the other end of the USB-C cable to a suitable USB wall adapter (not included) or car charger.
3. The LED screen will indicate charging status and battery percentage. Charge until the screen shows 100%.

Figure 2: Charging the BC02 and using it as a power bank.

It is recommended to recharge the device every 3-6 months, even if not in use, to maintain battery health.

Istruzzjonijiet Operattivi

1. Startjar ta' Vettura b'Avvanz

The BUTURE BC02 can jump start vehicles with up to 9.0L gas engines and 8.0L diesel engines.

1. Ensure the jump starter is sufficiently charged (at least 50% recommended).
2. Daħħal il-batterija smart clamp plug firmly into the jump starter's 12V output port. The indicator light on the clamp se jteptep aħmar u aħdar alternattivament.
3. Qabbad l-aħmar (+) clamp mat-terminal pożittiv (+) tal-batterija tal-vettura.
4. Qabbad l-iswed (-) clamp mat-terminal negattiv (-) tal-batterija tal-vettura.
5. Once connected correctly, the indicator light on the smart clamp will turn solid green. If it flashes red or beeps, check connections or refer to the troubleshooting section.
6. Ibda l-vettura tiegħek fi żmien 30 sekonda.
7. Ladarba l-vettura tibda, neħħi immedjatament is-smart clamp from the vehicle battery, then disconnect it from the jump starter.

Figure 3: Easy steps to jump start your vehicle.

Force Start Function: If the battery is extremely low and the smart clamp does not show a solid green light, consult the troubleshooting section for instructions on using the force start function (if available and safe for your vehicle).

2. Using the 150PSI Air Compressor

The integrated air compressor can inflate tires and other inflatables up to 150 PSI with smart preset and auto-stop features.

1. Agħfas il-buttuna tal-qawwa biex tixgħel l-apparat.
2. Connect the air hose to the inflation port on the device and tighten it.
3. Attach the other end of the air hose to the item you wish to inflate (tire valve, ball needle, etc.). Use the appropriate nozzle adapter if necessary.
4. Short press the 'M' button to enter inflation mode.
5. Press 'M' again to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom) or 'U' to change pressure units (PSI, BAR, KPA).
6. Uża l-buttuni '+' u '-' biex tissettja l-pressjoni mixtieqa.
7. Long press the power button for 3 seconds to start inflation. The compressor will automatically stop when the preset pressure is reached.
8. Once inflation is complete, disconnect the air hose from the item and the device.

Figure 4: Steps for using the air compressor.

Inflation Pressure Ranges:

• Car: 26-51 PSI
• Motorcycle: 26-44 PSI
• Bicycle: 30-65 PSI
• Ball: 4-16 PSI
• Custom Inflation: 0-150 PSI

Figure 5: Recommended inflation ranges for various items.

3. Użu bħala Power Bank Portabbli

The BC02 can charge your electronic devices on the go.

• Connect your device's charging cable to the USB-A output port (5V/2.4A) on the jump starter.
• Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.
• The USB-C port can also be used for input (5V/2A, 9V/2A, 12V/1.5A) to recharge the jump starter itself.

Figure 6: Charging mobile devices with the BC02.

4. Emergency Lights

The device features a 500-lumen LED light with multiple modes for emergency situations.

• Press the light button once for a steady flashlight.
• Press again for white strobe light.
• Press a third time for red strobe light (warning triangle).
• Press a fourth time for SOS signal.
• Press a fifth time to turn off the light.

Figure 7: Emergency light functions.

Manutenzjoni

• Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew materjali li joborxu.
• Ħażna: Aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Iċċarġjar: Recharge the device every 3-6 months to maintain battery life, even if not in use.
• Kura tal-batterija: Evita li tiċċarġja l-batterija kompletament ta' spiss.

Issolvi l-problemi

Speċifikazzjonijiet

Għajnuniet għall-Utent

• Always keep the jump starter charged, especially before long trips or during cold weather.
• Familiarize yourself with the different inflation modes and pressure units before an emergency.
• Store the device in an easily accessible location in your vehicle.
• Test the emergency light functions periodically to ensure they are working.

Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija, appoġġ tekniku, jew mistoqsijiet dwar is-servizz, jekk jogħġbok ikkuntattja lill-bejjiegħ jew lill-manifattur direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.